Samsung GS17VSSB Service Manual page 13

3 Disassembly and Reassembly
3-3 Reassembly
Reassembly procedures are in the reverse order of disassembly procedures.
GS17VS/GS17VT/GS19VS/GS19VT/
GS15MS/GS17MS/GS19MS
5. Lift up the panel shield and carefully remove
the silicon glue on the cables with a Nipper.
Caution : Lamp wire may be easily
!
damaged. Please use caution when removing
the silicon.
6. Remove 7 screws, 2 hexa screws from the
boards and lift up the boards.
Caution : When repairing panel only,
!
disconnect just LVDS cable, Panel-Lamp /
Wire marked in circle in the picture without
removing the screws on board in order to lift
the board up.
7. This picture is panel.
3-3