Configuring Dial Plans
Resetting the Control Timers
Resetting the Control Timers
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
You can use the following procedure to reset the default timer settings for all calls.
If you need to edit a timer setting only for a particular digit sequence or type of call,
you can edit the dial plan. See <Xref_Color>"About Dial Plans," on page 201.
Log in to the configuration utility.
Click Admin Login and advanced.
Click Voice tab > Regional.
Scroll down to the Control Timer Values section.
Enter the desired values in the Interdigit Long Timer field and the Interdigit Short
Timer field. Refer to the definitions at the beginning of this section.
8
212