Updating Your Phone Firmware; Determining Your Current Firmware Version - Cisco SPA501 User Manual

Installing Your Phone

Updating Your Phone Firmware

Updating Your Phone Firmware
!
CAUTION
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide
If the phone does not start, confirm your installation and connections. If these are
correct, try unplugging the phone and plugging it back in again. If you still do not
see the display, contact your phone administrator or Internet Telephony Service
Provider (ITSP).
Your phone ships with pre-installed firmware. However, later firmware versions
might be available that add features and fix problems with your phone. It is
necessary to use the latest firmware for ideal performance.
If you are using your phone with an Internet Telephony Service Provider system, do
not update your phone firmware without consulting your service provider. Your
provider can automatically update your phones without any action on your part
necessary.
To update your phone firmware, do one of the following:
• Download the firmware from the CCO and install it from your PC. (See the
next section for instructions.)
• Update by using the Cisco Voice System Setup Wizard (for example if your
phone is part of a Cisco Voice System network). See the Cisco
System Setup Wizard User Guide

Determining Your Current Firmware Version

Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G,
Cisco SPA512G, Cisco SPA514G:
Press the Setup button.
Scroll to Product Info and press select.
Scroll to Software Version. The firmware version number is displayed.
.
2
Voice
23