Other Recording Techniques - Yamaha Clavinova CLP-480 Owner's Manual

5.
Press the [PLAY/PAUSE] button to play back the recorded
Song.
After recording is completed, specify a different recording part in Step 2, then
record and overdub onto your performance as desired, part by part.

Other recording techniques

Replacing the part of an existing Song (MIDI data format)
For example, you can record your performance to the Right part along with the
Left part playback of the existing Song.
1.
Select the desired existing Song.
For information on selecting a Song, see page 27.
2.
If necessary, select the settings (Voice and other parameters).
Select the desired settings, if you wish to change the previous ones.
3.
Select a Part, start recording then stop recording by
executing steps 2 – 4 of "Multi Recording of specific Parts"
on page 36.
When you select a Preset Song in step 1, the recorded Song will be automatically
saved as a new Song to the MEMORY drive. When you select a Song in the
MEMORY drive/USB storage device in step 1, the recorded Song will be
overwritten.
4.
Press the [PLAY/PAUSE] button to play back the recorded
Song.
Re-recording a Song partially (MIDI data format)
You can re-record a specific range of the MIDI Song.
1.
Select the desired MIDI Song.
For instructions, refer to page 27.
2.
Select a recording method.
2-1
Press the [FILE/SONG SETTING] button.
2-2
Press the A [–][+] buttons to display "RecStart" or "RecEnd."
RecStart
Normal
NOTE
The recorded Songs are
named automatically, but you
can rename Songs as you like
(page 43).
NOTE
The Song Balance will not be
recorded.
Advanced Functions
Recording your performance
37