Memory Hole Remapping [Enabled]
Allows you to enable or disable memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Disabled]
Allows selection of the unganged DRAM mode.
Configuration options: [Disabled] [Enabled]
Power Down Enable [Enabled]
Allows you to enable or disable DDR power down mode.
Configuration options: [Disabled] [Enabled]
Power Down Mode [Channel]
Appears only when you enable the Power Down Enable item.
Configuration options: [Channel] [Chip Select]
Read Delay [Auto]
Sets the memory read delay mode.
Configuration options: [Auto] [0.5 Memory CLKs] [1.0 Memory CLKs] [1.5 Memory
CLKs] [2.0 Memory CLKs] [2.5 Memory CLKs] [3.0 Memory CLKs] [3.5 Memory
CLKs] [4.0 Memory CLKs]
DCQ Bypass Maximu [Auto]
Sets the DCQ Bypass Maximu.
Configuration options: [Auto] [0x] [1x] [2x] [3x] [4x] [5x] [6x] [7x] [8x] [9x] [10x] [11x]
[12x] [13x] [14x] [15x]
DRAM Timing Configuration
This sub-menu allows selection of the DRAM Timing Configuration.
Advanced
DRAM Timing Configuration
Memory Clock Mode
2T Mode
DRAM Timing Mode
The configuration options for some of the following items vary depending on the
DIMMs you install on the motherboard.
Memory Clock Mode [Auto]
Allows selection of the DRAM Frequency programming method.
Configuration options: [Auto] [Limit] [Manual]
ASUS M3A-H/HDMI
BIOS SETUP UTILITY
[Auto]
[Auto]
[Auto]
Options
Auto
Limit
Manual
depending on the
2-21