Wep Open System Authentication - NETGEAR WG602NA User Manual

• Shared Key Authentication requires that the station and the access point have the same WEP
Key to authenticate. These two authentication procedures are described below.

WEP Open System Authentication

This process is illustrated in below.
1) Authentication request sent to AP
3) Client connects to network
Client
attempting
to connect
Figure B-1: 802.11 open system authentication
The following steps occur when two devices use Open System Authentication:
The station sends an authentication request to the access point.
1.
The access point authenticates the station.
2.
The station associates with the access point and joins the network.
3.
Wireless Networking Basics
User's Guide for the WG602 v3 54 Mbps Wireless Access Point
802.11 Authentication
Open System Steps
2) AP authenticates
202-10060-01, September 2004
Router with Integrated
Access Point
IN TER N ET W LA N LO CA L MODEL FVM318
Cable/DSL ProSafeWirelessVPN Security Firewall
LNK 100
PWR TEST
ACT Enable LNK/ACT
1 2 3 4 5 6 7 8
Cable or
DLS modem
B-5