Downloading Images To A Computer (Imagebrowser) - Canon 7920A001 - GL 2 Camcorder Instruction Manual

Downloading Images to a Computer (ImageBrowser)

• Observe following precautions when the camcorder's card access indicator is
flashing (the camcorder is reading or writing from or to the memory card).
Failure to do so may cause memory card data to become corrupted.
– Do not remove the memory card or detach the USB cable.
– Do not turn off the camcorder or the computer.
– Do not change the position of the POWER switch or the TAPE/CARD
switch.
• Format the memory card with the camcorder.
• Still images recorded onto the memory card or downloaded to the hard disk
are important original data files. Create a copy of the file first before working
on it on your computer.
1.
Insert the memory card to the camcorder.
2.
Connect the Power Adapter to the camcorder.
3.
Connect the camcorder to the computer using the supplied
USB cable (
4.
Slide the POWER switch to PLAY(VCR) and the TAPE/CARD
switch to CARD.
• The [CANON_DV] icon or the corresponding drive icon appears on the
display.
• Mac X (10.1): If a dialog appears, click the red close box.
5.
Double-click the [Canon ImageBrowser] icon on the desktop.
• ImageBrowser starts.
• If the icon does not appear on the desktop, double-click the folder in
which you installed the program, followed by the [Canon Utilities] and
[ImageBrowser] folders and the [ImageBrowser] file.
6.
Double-click the [DCIM] folder in the Explorer View Section.
• No image will be imported if you click [Canon Camera]. Make sure you
select [DCIM].
• The images from the memory card appear as thumbnails in the Camera
Window (
Explorer View Section
57).
Canon ImageBrowser Icon
60).
E
59