Table of Contents
Advertisement
FURTHER INFORMATION
Changing the Menu Settings
1
Touch MENU.
2
Select the desired menu.
3
Select the desired setting.
Troubleshooting
Before requesting service, consult the
following chart. If the solutions indicated in the
chart do not solve the problem, consult your
nearest JVC dealer or JVC service center for
instructions.
Refer also to the FAQ of new products on
JVC's website.
Trouble
No power is supplied.
The remaining battery
display is not correct.
The LCD monitor is
diffi cult to see.
The following phenomena are not
malfunctions.
•
•
•
•
•
•
Connect the AC adapter correctly.
•
Recharge the battery pack.
•
Fully charge the battery pack, run it down, and then recharge it
again.
•
If the camcorder is used for long periods of time in high or low
temperatures, or if the battery pack is repeatedly charged, the
amount of remaining battery may not be displayed correctly.
•
The LCD monitor may be diffi cult to see if used in bright areas
such as under direct sunlight.
To return to the previous screen
Select
.
To quit the screen
Select [QUIT].
The camcorder heats up when it is used for a
long time.
The battery heats up during charging.
When playing back a video, the image stops
momentarily or the sound is interrupted at
junctions between scenes.
LCD monitor momentarily become red or
black when sunlight is recorded.
Black spots, or red, green, or blue spots
appear on the LCD monitor.
(The LCD monitor contains 99.99% effective
pixels, but 0.01% of fewer pixels may be
ineffective.)
Action
37
EN
Advertisement
Table of Contents
