Related Manuals for Samsung VAC-5913VB
Summary of Contents for Samsung VAC-5913VB
-
Page 1: Vacuum Cleaner
Operating lnstructions For household use only Models VAC-5900 SERIES VACUUM CLEANER Before operating this unit, please read the instructions carefully. -
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING To reduce the risk of fire, electric shock, or injury: 1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. 2. -
Page 3: Identifications Of Parts
IDENTIFICATIONS OF PARTS SUCTION HOSE HANDLE AIR REGULATOR DUST-FULL INDI- CATOR CYCLONIC FILTER* POWER CONTROL SWITCH* & ON/OFF TUBE* SWITCH CARRYING HAN- DLE & CORD REWIND BUTTON BUTTON FOR SUCTION HOSE REMOVAL CLAMPER FOR DUST BAG COM- PARTMENT RUG/FLOOR SELECTOR FLOOR NOZZLE* BELT-STRAP ASSY CREVICE-TOOL... -
Page 4: Power Cord
ASSEMBLING THE VACUUM-CLEANER READY FOR USE 1) Connect the suction hose to the suction 2) Connect the suction tubes together (depend- tube. ing on model). 3) Connect the nozzle to the suction tube. *OPTION➀ 4) Grip the body connector with one hand and *OPTION➁... -
Page 5: On/Off Switch
ON/OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch. NOTE : ON/OFF switch is combined with POWER CONTROLLER - To start or stop the unit just lightly press it downward. POWER CONTROL (VARIABLE CONTROL TYPE ONLY) The vacuuming power can be adjusted to suit any situa- tion with the electrical power control. -
Page 6: Park Position
USING & ASSEMBLING THE STRAP (OPTIONAL) This appliance is designed to be conveniently carried on your waist using the belt-strap accessory. When cleaning steps, curtains, shelves, etc, you can carry the unit with the strap over your shoulder. Ready for use 1) Insert the lockers into the holes on the cleaner, taking care of the lockers’... -
Page 7: Maintenance Or Replacement Of Filters
REPLACING THE DUST BAG 1) To open the dust cover of the dust bag compart- 2) Remove the dust bag from the cleaner. ment, press the clamper upwards.(The clamper is located at the front of the dust cover) 3) After removing the used dust bag, insert the card- 4) Press the dust cover down gently until the clam- board bag collar of the new dust bag into its origi- per relocks. - Page 8 CYCLONIC FILTER(ONLY CYCLONIC FILTER TYPES) You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it main- tain the maximum cleaning efficiency. The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and dust revolves in the Cyclonic Filter.
-
Page 9: Troubleshooting
NOTE: For optimum efficiency, clean floor brush with crevice tool. TROUBLE SHOOTING PROBLEM CAUSE REMEDY Motor does not start No voltage Check cable, plug and socket. Suction force is gradually Filter, nozzle, suction hose or Remove the obstruction reduced tube is blocked,or bag full. or replace bag. - Page 10 CODE-NO:DJ68-00068U REV(0.1)