Table of Contents
Advertisement
Help Functions
When there is a lot of noise, or when the call is disconnected, you can
use this function to reduce irrelevant noise by changing channel.
Noise reduction
Noise
Reduction
(Using the
Remote set)
This prevent the remote set from being disconnected from the base set.
Out of Range Warning
When the remote set gets
too far from the base set
37
Press the button.
If the noise is not reduced,
press the
a button
several times.
You will see a
mark on top
of screen with a warning tone.
When this occurs, move closer
toward the base set and talk
continually.
When the battery voltage of the remote set falls below a certain level, a
warning is given.
Low Voltage Warning in the Remote set
When the battery
You will hear a warning tone
needs recharging
with these
blinking.
When this occurs, immediately
recharge your remote set.
You can initialize the phone to its original condition.
Initializing the Remote set
Press three buttons at the same
time and hold more than 3
seconds.
Remote set
Ring type : 1
Ring volume : High
Receiving voice volume : Medium
Phone directory : None
Recent call Number : None
Current time : 01/1 24:00
mark
All functions will be
initialized with a
completion tone.
38
Advertisement
Table of Contents
