Solving Common Problems - Samsung AWT24A7ME Owner's Instructions Manual

Solving Common Problems

Before contacting the after-sales service, perform the following simple checks. They may save you
the time and expense of an unnecessary service call.
Problem
The air conditioner does not
operate at all
The air conditioner does not
operate with the remote control
No beep is heard when you press
(On/Off) on the remote control
The air conditioner does not
cool
The air flow direction does not
change when you press the
(or on the unit)button
The timer is not correctly triggered
Odours are permeated in the
room during air conditioning
14
E-
Explanation/Solution
Check that the circuit breaker used for the air conditioner has not been
triggered.
Check that the power cable is plugged into a wall socket and the socket
is switched on, if necessary.
Check that the operating mode indicator (COOL or FAN) on the
unit is lit up; if necessary press
Check that there are no obstacles between you and the unit.
Replace the remote control batteries if necessary.
Check that you are close enough to the unit (seven metres/yards or less).
Check that you are pointing the remote control at the remote control
sensor on the unit.
Replace the remote control batteries if necessary.
Check that the correct operating mode has been selected COOL.
The room temperature may be too low.
Dust may be blocking the air filter; refer to page 13 for cleaning
instructions.
Check that there is no obstacle blocking the air flow into or out of the unit.
Check that the air conditioner has been switched on; if necessary, press
(On/Off) on the remote control or unit.
Check that the timer has been programmed correctly; refer to page 11.
Air the room.
(On/Off) on the remote control or unit.