Advertisement
PREFACE
The ROM in this package is for exclusive use with the
professional jog pad in the DVEdit Operating Panel Kit
AY-RP500. Be sure to use the application software ver-
sion 2.1 or later version.
Before replacing the ROM, install the software of
Version 2.1 or higher.
Connect the professional jog pad after replacing the
ROM.
If you do not have the professional jog pad AY-JP2000,
it is not necessary to replace the ROM.
Important
• Before replacing the ROM, be sure to press the
power switch off and pull out the power plug
from the electrical outlet.
• Before handling the board, touch a metal part of
it with your hand to discharge static from your
body. Touching the board while you still have
static in your body may cause the board to fail.
It would be safer to wear an antistatic wrist
strap.
• When it is necessary to temporarily place the
board, put it on an antistatic mat or the like. Do
not let any metal part of the board contact the
metal parts of other boards.
-3-
Advertisement
