System Connections; Loudspeakers - Kenwood DVR-8100 Instruction Manual

Hide thumbs Also See for DVR-8100:
Table of Contents

Advertisement

System Connections

Make connections as shown below.
When connecting the related system components, refer also
to the instruction manuals of the related components.
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage
or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including
projection) equal or greater than, shown below.
Top panel : 50 cm
The power in this equipment will not be completely cut off from
the AC wall outlet when the main switch is turned OFF.

Loudspeakers

Speaker terminal
1
2
Upper side mark
Side panel : 10 cm
Excessive insertion of the cable can
Note
Note
cause defective contact.
Front
speaker
Center speaker
R
Surround
speaker
R
Subwoofer
Caution :
Caution:
Do not plug in the power lead until all connec-
tions are completed.
Malfunction of microcomputer
If operation is not possible or erroneous
display appears even though all connec-
tions have been made properly, reset the
microcomputer referring to "In case of
difficulty".
Back panel : 10 cm
Color tube
Black tube
Read this page carefully to ensure
safe operation.
DVR-8100 (EN)
White
tube
Front
speaker
L
Connect the speaker cable terminals
to the terminals with the same color
at the speaker terminal panel on the
main unit. Connect matching the
color of the speaker terminal (+ side)
and the color of the speaker cable
tube.
Speaker
Color of the speaker termi-
nal panel on the main unit
Front right
Red
Center
Green
Front left
White
Surround right
Gray
Subwoofer
Purple
Surrond left
Blue
Surround
speaker
L
11
I

Advertisement

Table of Contents
loading

Table of Contents