Listening To The Ipod; When Connecting With The Usb Cable - Kenwood KDV-5241U Instruction Manual

Listening to the iPod

You can connect an Apple iPod using the following cable or adapter:
To: Cable or adapter:
Listen to the USB 2.0 cable (supplied for the iPod)
music
Watch the video USB Audio and Video cable for iPod,
KCA-iP240V (not supplied)
• You can control playback from the unit.
• Disconnecting the iPod will stop playback. Press SOURCE to listen to another playback source.
• For details, refer also to the manual supplied for your iPod.
• See also page 45.
Caution:
• Avoid using the iPod if it might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.

When connecting with the USB cable

Connect using USB 2.0 cable (supplied for iPod):
USB input jack
Playback starts automatically from where it had been paused previously.*
* Not applicable for video files.
28 | KDV-5241U
Connect using USB Audio and Video cable for
iPod, KCA-iP240V (not supplied):
USB cable supplied
for your iPod
Connect to:
USB input jack on the control panel
USB input jack and AV-IN input jack on the control
panel
• Turn on the monitor to watch the video.
USB input jack
KCA-iP240V
(not supplied)
AV-IN input jack