Track Scan; Random Play; Disc Changer Control Features Playing Discs Using A Disc Changer; Fast Forwarding And Reversing Disc Play - Kenwood KDC-PS907 Instruction Manual

Track Scan

Successively play the beginning of each track on a disc until
you find the track that you want to listen to.
Turning Track Scan On/Off:
Press the SCAN button to switch track scan on and off.
The SCN indicator lights up when track scan is turned on.
The first 10 seconds of each track will be played, in order.
The track number currently being heard blinks in the display.
Stopping to Listen to the Track Being Scanned:
Press the SCAN button again to stop the scan and keep on
listening to a track normally.
NOTE
• Track scan is canceled when you stop playing a disc.
• Track scan only scans each track on a disc once.

Random Play

Play all the tracks on the current disc in random order.
1
Press the RDM button to switch random play on and off.
The RDM indicator lights up when random play is turned on.
The track number will change over and over in the display as
the next track is being selected.
When the track has been selected, play will begin.
The selected track number blinks in the display as it is being
played.
2 To change the track being heard, press the ¢ button.
Another track will be selected and played.
NOTE
Random play is canceled when you stop playing a disc.
Disc changer control features
Playing Discs Using a Disc Changer
Playing Discs:
Press the CH button.
The disc indicator lights up during disc changer mode.
When one disc has finished playing its last track, the next disc
in the changer will start playing. When the last disc in the
changer has finished, the player will return to the first disc and
start playing it.
Disc #10 is displayed as "0".
Switching Between Disc Changers:
When two disc changers are connected to the unit, press the
CH button for at least one second to switch from one to the
other.
NOTE
The KCA-S200, which is sold separately, must be installed when
two disc changers are connected.When the KDC-C810 is the
directly connected disc changer (disc changer 1), two units may
be controlled even without the KCA-S200.
Pausing and Restarting Disc Play:
Press the CH button to make the disc pause.
Press the same button again to start play again.

Fast Forwarding and Reversing Disc Play

Fast Forwarding Disc Play:
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
NOTE
You cannot use reverse play between tracks when listening to an
MD on the MD changer. Instead, the reverse play function is
canceled when it reaches the beginning of a track, at which point
normal play will automatically resume.
(See page 10)
23