Table of Contents
Advertisement
Function Setting System
Function items in Standby:
Touch Sensor Tone
Setting the operation check sound (beep sound) ON/OFF.
Display
Setting
"BEEP On"
Beep is heard.
"BEEP Off"
Beep canceled.
Switching Preout
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display
Setting
"Preout REAR"
Rear preout.
"Preout N-F"
Non-fading preout.
Opening Demonstration
Setting the Demonstration when Power is turned ON.
Display
Setting
"Opening On"
Demonstration is carried out when Power is
turned ON.
"Opening Off" Demonstration is not carried out when Power is
turned ON.
Security Code
Because authorization by the Security Code is required when it's
removed from the vehicle, personalizing this unit is by using the
Security Code is a help in preventing theft.
When the Security Code function is activated, the code can't be
changed and the function can't be released.
Note, the Security Code can be set as the 4 digit number of your
choice.
1
Select Security Code mode
Press the [FM] or [AM] button.
Select the "CODE STBY" display.
2
Enter Security Code mode
Press the [38] button for at least 2 seconds.
When "CODE WRITE" is displayed, "CODE **** " is displayed.
3
Enter the Security Code
Press the [1] — [4] button.
Example: If the Security Code is "3510".
Step
Button
1
[1]
2
[2]
3
[3]
4
[4]
4
Confirm the Security Code
Press the [38] button.
When "CODE **** 1" is displayed.
5
Do the step 3 and step 4 operation, and reenter the security
code.
"CODE WRITE" is displayed.
The Security Code function activates.
When a Code different from step 3 is entered, repeat from step 3.
— 30 —
Times pressed
Display
4
"3"
6
"5"
2
"1"
1
"0"
Advertisement
Table of Contents
