Dell PowerEdge KVM 1081AD User Manual page 64

the cascaded switch is visible on screen. When you select from the list, the
Modify button is enabled, allowing you to assign it the appropriate number of
ports.
NOTE:
The Modify button is available only if a configurable switch is selected.
To access the Server dialog box:
1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - Devices. The Devices dialog box displays.
Figure 3-7. Devices Dialog Box
When the Remote Console Switch discovers a cascaded switch, the port
numbering changes to accommodate each device under that switch. For
example, if the switch is connected to ARI port 6, the switch port is listed as
06 and each device under it is numbered sequentially 06-01, 06-02 and so on.
NOTE:
Changes made in the Device Modify dialog box are not saved until you click
OK in the Devices dialog box.
To assign a device type:
1 In the Devices dialog box, select the desired port number.
2 Click Modify. The Device Modify dialog box displays.
48
Controlling Your System at the Analog Ports