Cid Time Synchronization; Home Area Code - AT&T TL32100 User Manual

Telephone settings
Handset settings

CID time synchronization

CID time sync is programmed to be on. If you subscribe to caller ID service,
the day, month and time are set automatically with each incoming call (see
About caller ID on page 44). You can turn CID time sync off so the system
uses the date and time that you set (see Set date/time on page 14).
Press MENU/
1.
2. Press or
DIR
3. Press or
DIR
press /SELECT.
MENU
4. Press or
DIR
press /SELECT.
MENU
5. Press or
DIR
6. Press /SELECT to save your preference.
MENU

Home area code

If you dial seven digits to make a local call (no area code required), enter
your area code into the telephone as the home area code. When you receive
a call from within your home area code, the caller ID history only displays the
seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID history. If
you dial 10 digits to make a local telephone call, do not use this home area
code feature. If you do, you will not be able to place calls from your caller ID
history as they have only seven digits.
1. Follow steps 1 and 2 in CID time synchronization on
this page.
2. Press or
DIR
/SELECT.
press
MENU
3. Press the dial pad keys to enter your three-digit area
code. Press
MUTE
4. Press /SELECT to save the setting.
MENU
NOTE: If, in the future, your telephone service provider requires you to dial 10 digits to make
a local call (area code + telephone number), you will need to delete your home area code. While
the home area code is displaying in step 3 above, press and hold
code is now restored to its default setting of _ _ _ (empty).
in idle mode.
SELECT
to scroll to >Settings, then press
CID
to scroll to >Set date/time, then
CID
to scroll to >CID time sync, then
CID
to select On or Off.
CID
to scroll to >Home area code, then
CID
/REMOVE to delete digits while entering.
MUTE
15
/SELECT.
MENU
CID time sync
>On
Home area code
/REMOVE. The home area
___