• SDXC, SDHC, and SD Logos are trademarks of SD-3C, LLC. • PictBridge is a trademark. • All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders.
Page 3
Introduction Parts of the Camera and Basic Operation Basic Steps for Shooting and Playback Shooting Features Playback Features Recording and Playing Back Movies General Camera Setup Reference Section Technical Notes and Index...
Introduction Read This First Thank you for purchasing the Nikon COOLPIX S3300 digital camera. Before using the camera, please read the information in “For Your Safety” (Avi) and familiarize yourself with the information provided in this manual. After reading, please keep this manual handy and refer to it to enhance your enjoyment of your new camera.
Read This First About This Manual If you want to start using the camera right away, see “Basic Steps for Shooting and Playback” (A13). To learn about the parts of the camera and basic operations, see “Parts of the Camera and Basic Operation” (A1). Other Information •...
Before taking images on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
Page 7
• Nikon will not be held liable for any damages resulting from the use of this product. • While every effort was made to ensure that the information in the documentation is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately).
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
Page 9
Should the insulation • Do not immerse in or expose to be damaged and the wires become water. exposed, take it to a Nikon- • Put the battery in the battery case authorized service representative for before transporting it. Do not inspection.
Page 10
When connecting cables to the input skin or entering the eyes or mouth. and output jacks, use only the cables Turn the power off when provided or sold by Nikon for the using inside an airplane or the purpose, to maintain compliance with hospital product regulations.
Nikon interference in a residential installation. Corporation may void the user’s This equipment generates, uses, and authority to operate the equipment.
Page 12
This symbol on the battery Wash hands after handling. indicates that the battery is Nikon Inc., to be collected separately. 1300 Walt Whitman Road The following apply only to Melville, New York 11747-3064 users in European countries: •...
Table of Contents Introduction ............................ii Read This First ............................ii Confirming the Package Contents ......................ii About This Manual............................... iii Information and Precautions........................iv For Your Safety............................vi WARNINGS................................vi Notices ..............................ix Parts of the Camera and Basic Operation................... 1 Parts of the Camera..........................
Page 14
Table of Contents Changing A (Auto) Mode Settings ....................... 36 Shooting Menu Options in A (Auto) Mode..................37 Scene Mode (Shooting Suited to Scenes) .................. 39 Changing Scene Mode Settings........................ 39 Scene Mode and Features ..........................40 Special Effects Mode (Applying Effects When Shooting) ............. 47 Changing Special Effects Mode Settings.....................
Page 15
Table of Contents General Camera Setup........................85 The Setup Menu ..........................86 Reference Section ........................E1 Using Panorama Assist......................... E2 Favorite Pictures Mode ........................ E4 Adding Images to Albums........................E4 Viewing Images in an Album ........................ E5 Removing Images from Albums ......................E5 Changing Icons Assigned to Albums....................
Page 16
Table of Contents f Rotate Image............................E43 E Voice Memo............................. E44 h Copy (Copy Between Internal Memory and Memory Card) ........E46 The Movie Menu.......................... E47 Movie Options ............................. E47 Autofocus Mode............................E48 Wind Noise Reduction ........................... E48 The Setup Menu .......................... E49 Welcome Screen ............................
Parts of the Camera and Basic Operation This chapter describes the parts of the camera and also explains how to use basic camera features. Parts of the Camera ............2 The Camera Body ......................2 Camera Controls Used in Shooting Mode ..............4 Camera Controls Used in Playback Mode ..............5 The Monitor .........................6 Basic Operations ..............8...
Parts of the Camera and Basic Operation Parts of the Camera The Camera Body Lens cover closed Shutter-release button....4, 5, 28 Flash..............53 Zoom control........4, 5, 27 Self-timer lamp ..........55 f: Wide-angle........4, 27 AF-assist illuminator........87 g: Telephoto..........4, 27 Lens h: Thumbnail playback....5, 31 Built-in microphone....
Page 19
Parts of the Camera 14 15 16 17 Charge lamp........17, E63 USB/audio/video output connector .........16, 72, E17, E19 Flash lamp............53 b (e movie-record) button..4, 5, 78 Tripod socket..........F15 A (shooting mode) button Speaker ..........82, E44 ..............4, 5, 8, 24 Connector cover c (playback) button ..4, 5, 8, 30, 70 .........16, 72, E17, E19...
Parts of the Camera Camera Controls Used in Shooting Mode Control Name Main function Shooting mode Changes the shooting mode (displays button the shooting mode selection screen). Zooms in and out; rotate to g (i) to zoom in, and rotate to f (h) to zoom Zoom control out.
Parts of the Camera Camera Controls Used in Playback Mode Control Name Main function • Changes the playback mode (displays the playback mode selection screen). Playback button • When the camera is off, press and hold this button to turn the camera on in playback mode.
Parts of the Camera The Monitor The information that is displayed in the monitor during shooting and playback changes depending on the camera’s settings and state of use. At the default setting, the indicators below are displayed when the camera is turned on or is in operation, and they disappear after a few seconds elapse (when Photo info is set to Auto info in Monitor settings (A86)).
Page 23
Parts of the Camera Playback Mode 1 5 / 0 5 / 2 0 1 2 1 2 : 0 0 1 5 / 0 5 / 2 0 1 2 1 2 : 0 0 9 9 9 9 . J P G 9 9 9 9 .
Basic Operations Switching Between Shooting Mode and Playback Mode The camera has two modes of operation: Shooting mode, which is used for taking pictures, and playback mode, which is used for viewing pictures. While using shooting mode, press the c (playback) button to switch to playback mode;...
Basic Operations Using the Multi Selector Operate by pressing the multi selector up ( H ), down ( I ), left ( J ), or right ( K ), or pressing the k button. Shooting Mode Display m (flash mode) menu (A53) or move cursor up Display o (exposure compensation) guide...
Basic Operations Using Menus (the d Button) If you press the d button while the shooting screen or playback screen is displayed, the menu for the current mode is displayed. Once the menu is displayed, you can change various settings. Shooting mode Playback mode 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0...
Basic Operations Switching Between Tabs Set up Shooting menu Shooting menu Welcome screen Image mode Image mode Time zone and date White balance White balance Monitor settings Continuous Continuous Print date ISO sensitivity ISO sensitivity Vibration reduction Color options Color options Motion detection AF area mode AF area mode...
Basic Steps for Shooting and Playback Preparation Preparation 1 Insert the Battery ..................14 Preparation 2 Charge the Battery .................16 Preparation 3 Insert a Memory Card ................18 Shooting Step 1 Turn the Camera On .....................20 Setting Display Language, Date and Time (First Use Only) ......22 Step 2 Select a Shooting Mode ..................24 Step 3 Frame a Picture ......................26 Step 4 Focus and Shoot.....................28...
Basic Steps for Shooting and Playback Preparation Insert the Battery Open the battery-chamber/memory card slot cover. Insert the included Battery latch Rechargeable Li-ion Battery EN-EL19. • Use the battery to push the orange battery latch in the direction indicated by the arrow ( 1 ) and fully insert the battery ( 2 ).
Preparation 1 Insert the Battery Removing the Battery Turn the camera off and be sure that the power-on lamp and the monitor have turned off and open the battery-chamber/memory card slot cover. Push the orange battery latch in the direction indicated by the arrow ( 1 ) to partially eject the battery.
Preparation 2 Charge the Battery Prepare the included Charging AC Adapter EH-69P. • If a plug adapter* is included, attach the plug adapter to the plug on the Charging AC Adapter. Push the plug adapter firmly until it is securely held in place. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product.
Page 33
Preparation 2 Charge the Battery Understanding the Charge Lamp Charge lamp Description Flashes slowly Battery charging. (green) Battery not charging. When charging is complete, the charge lamp stops flashing green and turns off. • The ambient temperature is not suited to charging. Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F).
Preparation Insert a Memory Card Be sure that the power-on lamp and the monitor are off and open the battery- chamber/memory card slot cover. • Be sure to turn off the camera before opening the cover. Insert the memory card. Memory card slot •...
Preparation 3 Insert a Memory Card Removing Memory Cards Turn the camera off and be sure that the power-on lamp and the monitor have turned off and open the battery-chamber/memory card slot cover. Gently push the memory card into the camera ( 1 ) to partially eject the card.
Step Turn the Camera On Press the power switch to turn on the camera. • If you are turning the camera on for the first time after purchase, see “Setting Display Language, Date and Time” (A22). • The lens extends and the monitor turns on. Check the battery level indicator and the number of exposures remaining.
Step 1 Turn the Camera On Turning the Camera On and Off • When the camera is turned on, the power-on lamp (green) will light, and then the monitor will turn on (the power-on lamp turns off when the monitor turns on).
Step 1 Turn the Camera On Setting Display Language, Date and Time A language-selection dialog is displayed the first time the camera is turned on. Press the multi selector H or Language I to choose the desired language and press the k button.
Page 39
Step 1 Turn the Camera On Press H or I to choose Yes and press the k Date and time button. 1 5 / 0 5 / 2 0 1 2 1 5 :3 0 • When the settings are applied, the lens extends and the monitor display exits to shooting mode.
Step 2 Select a Shooting Mode Press the A button. • The shooting mode selection menu, which allows you to select the desired shooting mode, is displayed. Press the multi selector H or I Auto mode to choose a shooting mode. •...
Step 2 Select a Shooting Mode Available Shooting Modes Auto mode Used for general shooting. Settings can be adjusted in the shooting menu (A37) to suit the shooting conditions and the type of shot you want to capture. Scene Camera settings are automatically optimized for the selected scene. When using scene auto selector, the camera automatically selects the optimum scene mode when you frame a picture, making it even easier to take pictures using settings that suit the scene.
Step Frame a Picture Hold the camera steadily in both hands. • Keep fingers and other objects away from the lens, flash, AF assist-illuminator, microphone, and speaker. • When taking pictures in portrait (“tall”) orientation, turn the camera so that the built-in flash is above the lens. Frame the picture.
Step 3 Frame a Picture Using the Zoom Use the zoom control to activate optical zoom. Zoom out Zoom in • Rotate the zoom control to g to zoom in so that the subject fills a larger area of the frame. •...
Step Focus and Shoot Press the shutter-release button halfway, i.e., press the button lightly until you feel a slight resistance. • When you press the shutter-release button halfway, the camera sets focus and exposure (shutter speed and aperture value). Focus and exposure remain locked while the shutter-release button is pressed halfway.
Page 45
Step 4 Focus and Shoot Note on Recording Images and Saving Movies The indicator showing the number of exposures remaining or the indicator showing the maximum movie length flashes while images are being recorded or while a movie is being saved. Do not open the battery-chamber/memory card slot cover or remove the battery or memory card while an indicator is flashing.
Step Play Back Images Press the c (playback) button. • The camera enters playback mode, and the last image captured is displayed in full- frame playback mode. b (e movie-record) button c (playback) button A (shooting mode) button Multi selector Use the multi selector to select an image to 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0...
Step 5 Play Back Images Changing How Images Are Displayed When using playback mode, you can change how images are displayed by rotating the zoom control to f (h) and g (i) (A4). Playback Zoom 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 0 0 0 4 .
Step 6 Delete Unwanted Images Press the l button to delete the image currently displayed in the monitor. Press the multi selector H or I to choose the desired deletion method and press the k Delete button. • Current image: Delete the image currently displayed. Current image •...
Page 49
Step 6 Delete Unwanted Images Operating the Erase Selected Images Screen Press the multi selector J or K to choose an Erase selected images image to be deleted, and then press H to display y. • To undo the selection, press I to remove y. •...
Shooting Features This chapter describes each of the camera’s shooting modes and the features that are available when using each shooting mode. By referring to this information, you will learn how to select different shooting modes and adjust settings according to the shooting conditions and the kind of images you want to take.
Shooting Features A (Auto) Mode A (auto) mode is useful for general photography, and it allows you to customize a variety of settings to suit the shooting conditions and the type of shot you want to capture (A37). 8 m 0 s 8 m 0 s 9 5 0 9 5 0...
A (Auto) Mode Shooting Menu Options in A (Auto) Mode In A (auto) mode, the following options can be Shooting menu changed. Image mode White balance Continuous ISO sensitivity Color options AF area mode Autofocus mode On the A (Auto) mode shooting screen M d button Option Description Allows you to select the combination of image size and...
Page 54
A (Auto) Mode Option Description Allows you to change the color tones of images at the time of shooting. The available settings are Standard Color options color (default setting), Vivid color, Black-and-white, Sepia, and Cyanotype. Allows you to select how the camera determines the AF area mode focus area for autofocus, from Face priority (default setting), Auto, Manual, Center, or Subject tracking.
Scene Mode (Shooting Suited to Scenes) Camera settings are automatically optimized for the selected subject type. Scene modes shown as below are available. On the shooting screen M A (shooting mode) button M x (second icon from the top*) M K M select a scene (A24-25) * The icon for the last scene mode selected is displayed.
Scene Mode (Shooting Suited to Scenes) Scene Mode and Features x Scene auto selector The camera simplifies shooting by automatically selecting the optimum scene mode as shown below when the shot is framed. e: Portrait, f: Landscape, h: Night portrait, g: Night landscape, i: Close-up, j: Backlighting, d: Other scenes •...
Scene Mode (Shooting Suited to Scenes) d Sports Use this mode for dynamic action shots that freeze the action in a single shot and record motion in a series of still images. • The camera focuses at the center of the frame. •...
Page 58
Scene Mode (Shooting Suited to Scenes) z Snow Captures the brightness of sunlit snow. • The camera focuses at the center of the frame. h Sunset Preserves the deep hues seen in sunsets and sunrises. • The camera focuses at the center of the frame. i Dusk/dawn Preserves the colors seen in the weak natural light before sunrise or after sunset.
Page 59
Scene Mode (Shooting Suited to Scenes) k Close-up Photograph flowers, insects and other small objects at close range. • Macro mode (A56) is enabled and the camera automatically zooms to the closest position at which it can focus. • The active focus area can be moved by pressing the k button and then pressing the multi selector H, I, J, or K.
Page 60
Scene Mode (Shooting Suited to Scenes) l Museum Use indoors where flash photography is prohibited (for example, in museums and art galleries) or in other settings in which you do not want to use the flash. • The camera focuses at the center of the frame. •...
Page 61
Scene Mode (Shooting Suited to Scenes) U Panorama assist Takes a series of images that you can join together into a panorama on a computer. • Select the direction in which to add images to the panorama by pressing the multi selector H, I, J, or K and then press the k button.
Page 62
Scene Mode (Shooting Suited to Scenes) O Pet portrait Use this mode for taking portraits of pets (dogs or cats). When the camera detects the face of a dog or cat, it focuses on the face and automatically releases the shutter (pet portrait auto release).
Special Effects Mode (Applying Effects When Shooting) Effects can be applied to images during shooting. On the shooting screen M A (shooting mode) button M D (third icon from the top*) M K M select an effect (A24-25) * The icon of the last effect selected is displayed. The default setting is D (soft). The following six effects are available.
Special Effects Mode (Applying Effects When Shooting) Changing Special Effects Mode Settings • Features that can be set using the multi selector (A52): Flash mode (A53), self-timer (A55), macro mode (A56), and exposure compensation (A57). • Features that can be set by pressing the d button: Image mode, which is the combination of image size and image quality (A60).
Smart Portrait Mode (Capturing Images of Smiling Faces) When human smiles are detected, the camera automatically releases the shutter without you having to press the shutter-release button (smile timer). You can also use the skin softening option to smooth the skin tones of human faces. On the shooting screen M A (shooting mode) button M F Smart portrait (A24-25) Frame a picture and wait for the subject to smile without pressing the shutter-release...
Page 66
Smart Portrait Mode (Capturing Images of Smiling Faces) Notes About Smart Portrait Mode • Digital zoom is not available. • Under some shooting conditions, the camera may be unable to detect faces or smiles. • See “Notes About Face Detection Function” (A65) for more information. Auto Off in Smile Timer Mode When Smile timer is set to On, the auto off function (A87) is activated and the camera turns off when either of the situations indicated below persists and no other operations are performed.
Smart Portrait Mode (Capturing Images of Smiling Faces) Changing Smart Portrait Mode Settings • Features That Can Be Set Using the Multi Selector (A52): Flash mode (A53), self-timer (A55), and exposure compensation (A57). • See “Smart Portrait Menu Options” (A51) for more information about functions that can be set using the d button.
Features That Can Be Set Using the Multi Selector The following shooting functions can be set by pressing the multi selector H (m), I (p), J (n), or K (o) when shooting. m (flash mode) n (self-timer) p (macro mode) o (exposure compensation) Functions Available for Each Shooting Mode The functions that can be set vary depending on the shooting mode, as shown...
Features That Can Be Set Using the Multi Selector Using the Flash (Flash Modes) The flash mode can be set to match the shooting conditions. Press the multi selector H (m flash mode). Press the multi selector H or I to choose the desired flash mode and press the k button.
Features That Can Be Set Using the Multi Selector Available Flash Modes Auto Flash fires automatically when lighting is dim. Auto with red-eye reduction Suited to pictures of people. This option reduces the “red-eye” phenomenon that caused by the use of flash. Flash will not fire even when lighting is dim.
Features That Can Be Set Using the Multi Selector Using the Self-timer The camera is equipped with a self-timer that releases the shutter ten seconds or two seconds after you press the shutter-release button. The self-timer is useful when you want to be in the picture you are taking, and when you want to avoid the effects of camera shake that occur when you press the shutter-release button.
Features That Can Be Set Using the Multi Selector Using Macro Mode When using macro mode, the camera can focus on objects as close as approximately 5 cm (2 in.) from the front of the lens. This feature is useful when taking close-up pictures of flowers and other small subjects.
Features That Can Be Set Using the Multi Selector Adjusting Brightness (Exposure Compensation) Exposure compensation is used to alter exposure from the value suggested by the camera to make images brighter or darker. Press the multi selector K (o exposure compensation).
Features That Can Be Set Using the Multi Selector Default Settings The default settings for each function in each shooting mode are described below. • See the next page for information about the default settings in the scene modes. Exposure Flash Self-timer Macro...
Page 75
Features That Can Be Set Using the Multi Selector The default settings for each function in scene mode are described below. Exposure Flash Self-timer Macro compensation (A53) (A55) (A56) (A57) x (A40) b (A40) c (A40) d (A41) e (A41) f (A41) Z (A41) z (A42)
Changing the Image Size (Image Mode) On the shooting screen M d button M Image mode You can use the Image mode setting in the shooting Image mode menu to select the combination of image size and 4608×3456P 4608×3456 compression ratio that is used when saving images. 3264×2448 2272×1704 Choose the image mode best suited to the manner in...
Changing the Image Size (Image Mode) Image Mode • Change made to this setting applies to all shooting modes. • There are functions with which this setting cannot be enabled. See “Functions That Cannot Be Applied Simultaneously” (A62) for more information. Number of Exposures Remaining The following table lists the approximate number of images that can be stored in internal memory and on a 4 GB memory card.
Functions That Cannot Be Applied Simultaneously Some shooting settings cannot be used with other functions. Restricted Setting Description function Continuous When Continuous, BSS, or Multi-shot 6 is Flash mode (A37) selected, flash is disabled. AF area mode When Subject tracking is selected, self-timer is Self-timer (A38) disabled.
Page 79
Functions That Cannot Be Applied Simultaneously Restricted Setting Description function Continuous When Continuous, BSS, or Multi-shot 6 is Blink warning (A37) selected, Blink warning is disabled. Continuous When Multi-shot 6 is selected, digital zoom is (A37) not available. Digital zoom AF area mode When Subject tracking is selected, digital zoom (A38)
Face Detection When the camera is pointed at a human face in the shooting modes as shown below, the camera automatically detects the face and focuses on it. When the camera detects more than one face, the double border (focus area) is displayed around the face that is 8 m 0 s 8 m 0 s focused on, and single borders around the others.
Page 81
Face Detection Notes About Face Detection Function • The camera’s ability to detect faces depends on a variety of factors, including the direction in which the faces are looking. The camera may be unable to detect faces in the following situations: - When faces are partially hidden by sunglasses or otherwise obstructed - When faces take up too much or too little of the frame •...
Skin Softening In the shooting modes as shown below, the camera detects up to three human faces when the shutter is released, and processes the image to soften facial skin tones before saving the image. • Scene auto selector, Portrait (A40) or Night portrait (A41) scene mode •...
Focus Lock Use focus lock to focus on off-center subjects when center is selected for AF area mode. To focus on off-center subjects when Center is selected for AF area mode in the shooting menu (A37) in A (auto) mode, use focus lock as described below.
Playback Features This chapter describes how to select certain types of images for playback as well as some of the features available when playing back images. 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 0 0 0 4 .
Playback Features Selecting Certain Types of Images for Playback You can change the playback mode according to the type of images you want to view. Available Playback Modes Play All images are played back. When you switch from shooting mode to playback mode, this mode is selected.
Functions Available in Playback Mode (Playback Menu) When viewing images in full-frame playback mode or thumbnail playback mode, you can configure the menu operations listed below by pressing the d button. When using favorite pictures (h), auto sort (F), or list by date (C) mode, the menu for the current playback mode is displayed.
Connecting the Camera to a Television, Computer, or Printer You can enhance your enjoyment of images and movies by connecting the camera to a TV, computer, or printer. • Before connecting the camera to an external device, make sure the remaining battery level is sufficient and the camera is turned off.
• Windows XP Home Edition/Professional (Service Pack 3) Macintosh • Mac OS X (version 10.5.8, 10.6.8, 10.7.2) Refer to the Nikon website for the latest information on operating system compatibility. Start the computer and insert the ViewNX 2 Installer CD-ROM into the CD-ROM drive.
Page 90
The following software is installed: • ViewNX 2 (consisting of the three modules below) - Nikon Transfer 2: For transferring images to the computer - ViewNX 2: For viewing, editing, and printing transferred images - Nikon Movie Editor: For basic editing of transferred movies •...
• SD card reader: Connect a card reader (available separately from third-party suppliers) to the computer and insert the memory card. If a message is displayed prompting you to choose a program, select Nikon Transfer 2. • When using Windows...
Transfer images to the computer. • Confirm that the name of the connected camera or removable disk is displayed as the “Source” on the “Options” title bar of Nikon Transfer 2 ( 1 ). • Click Start Transfer ( 2 ).
Recording and Playing Back Movies You can record movies by simply pressing the b (e movie-record) button. 8 m 0 s 8 m 0 s 9 5 0 9 5 0 1 5 s 1 5 s In playback mode, press the k button to play a movie. 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 0 0 1 0 .
Recording and Playing Back Movies Recording Movies You can record movies by simply pressing the b (e movie-record) button. The settings made for still images, such as hue and white balance, are applied when recording movies. • The maximum file size for a single movie is 2 GB or the maximum movie length for a single movie is 29 minutes, even when there is sufficient free space on the memory card for longer recording (A80).
Page 95
Recording Movies Note on Recording Images and Saving Movies The indicator showing the number of exposures remaining or the indicator showing the maximum movie length flashes while images are being recorded or while a movie is being saved. Do not open the battery-chamber/memory card slot cover or remove the battery or memory card while an indicator is flashing.
Page 96
Recording Movies Notes About Camera Temperature • The camera temperature may increase significantly when used for an extended period of time for movie recording, etc. or when used in places with high ambient temperature. • If the camera becomes extremely hot while recording a movie, the camera automatically terminates recording after 30 seconds.
Recording Movies Changing Movie Recording Settings (The Movie Menu) On the shooting screen M d button M D tab (A10) The following options can be adjusted. Movie Movie options Autofocus mode Wind noise reduction Option Description The following movie types are available: n HD 2 p ( 28 ×...
Movie Playback Deleting a Movie File To delete a movie, select the desired movie in full-frame playback mode (A30) or thumbnail playback mode (A31) and press the l button (A32). Note About Movie Playback Movies recorded by a camera other than the COOLPIX S3300 cannot be played back.
General Camera Setup This chapter describes the various settings that can be adjusted in the z setup menu. Set up Welcome screen Time zone and date Monitor settings Print date 8 m 0 s 8 m 0 s Vibration reduction 9 5 0 9 5 0 Motion detection...
General Camera Setup The Setup Menu Press the d button M z (setup) tab (A10) The following settings can be changed in the setup Set up menu by selecting the z tab. Welcome screen Time zone and date Monitor settings Print date Vibration reduction Motion detection...
The Setup Menu Option Description Allows you to reduce blurring caused by camera shake when shooting. The default setting is On. Vibration • When using a tripod to stabilize the camera during reduction shooting, set this feature to Off to prevent this feature from malfunctioning.
Page 104
The Setup Menu Option Description Allows you to format the internal memory (only when a memory card is not inserted) or the memory card (when a memory card is inserted). Format memory/ • All data stored in the internal memory or on the Format card memory card is deleted during formatting and cannot be restored.
Reference Section The Reference Section provides detailed information and hints for using the camera. Shooting Using Panorama Assist ..................... E2 Playback Favorite Pictures Mode..................... E4 Auto Sort Mode......................E7 List by Date Mode ...................... E9 Editing Images (Still Images) ................E10 Connecting the Camera to a TV (Playback on a TV)........E17 Connecting the Camera to a Printer (Direct Print) ........E18 Menu...
Reference Section Using Panorama Assist Use a tripod for the best results. On the shooting screen M A (shooting mode) button M x (second icon from the top*) M K M U Panorama assist * The icon for the last scene mode selected is displayed. The default setting is x (Scene auto selector).
Page 107
Using Panorama Assist Press the k button when shooting is complete. • The camera returns to step 1. 8 m 0 s 8 m 0 s 9 4 7 9 4 7 Notes About Panorama Assist • Flash mode, self-timer, macro mode and exposure compensation settings cannot be adjusted after the first picture is taken.
Favorite Pictures Mode You can sort your favorite pictures into nine albums (this option is not available for movies). Once they are added, you can choose to play back only favorite pictures by selecting favorite pictures mode. • Categorizing albums by theme or type of subject makes it easier to find a particular picture.
Favorite Pictures Mode Viewing Images in an Album Press the c button (playback mode) M c button M h Favorite pictures Use the multi selector to select an album and then Favorite pictures press the k button to play back the images that have been added to the selected album.
Favorite Pictures Mode Changing Icons Assigned to Albums From the album selection screen (A70, E5), select Choose icon an album and press the d button to change the album’s icon. • Select a color, press the k button, and select an icon and press the k button to change the icon.
Auto Sort Mode Images are automatically sorted into categories, such as portraits, landscapes, and movies. Press the c button (playback mode) M c button M F Auto sort mode Use the multi selector to select a category and then Portraits press the k button to play back the images in the selected category.
Auto Sort Mode Notes About Auto Sort Mode • Up to 999 images and movie files can be sorted into each category in auto sort mode. If 999 images or movies have already been sorted into a specific category, new images and movies cannot be sorted into that category nor can they be displayed in auto sort mode.
List by Date Mode Press the c button (playback mode) M c button M C List by date Select a date with the multi selector, and press the k List by date button to play back images captured on the selected 2 0 / 0 5 / 2 0 1 2 date.
Editing Images (Still Images) Editing Functions Use the COOLPIX S3300 to edit images in-camera and store them as separate files (E70). The editing functions described below are available. Editing function Description Easily create retouched copies in which contrast and Quick retouch (E12) saturation have been enhanced.
Page 115
Editing Images (Still Images) Restrictions on Image Editing When an edited copy is further modified with another editing function, check the following restrictions. Editing function used Editing function to use Quick retouch The glamour retouch, small picture or crop functions can be used. The D-Lighting quick retouch, D-Lighting, and filter effects functions cannot be used Filter effects...
Editing Images (Still Images) k Quick Retouch: Enhancing Contrast and Saturation Press the c button (playback mode) M select an image M d button M k Quick retouch Press the multi selector H or I to choose the Quick retouch degree of enhancement performed and press the k button.
Editing Images (Still Images) s Glamour Retouch: Softening Skin and Making Faces Looking Smaller with Larger Eyes Press the c button (playback mode) M select an image M d button M s Glamour retouch Press the multi selector H or I to choose All Glamour retouch or Skin softening and press the k button.
Editing Images (Still Images) p Filter Effects: Applying Digital Filter Effects Press the c button (playback mode) M select an image M d button M p Filter effects Type Description Give the image a soft look by blurring from the center outward. In images captured with face detection (A64) or pet detection Soft (A46) selected, areas around faces will be blurred.
Editing Images (Still Images) Check the results, and press the k button. Preview • A new, edited copy is created. • To exit without saving the copy, press J. Back Back Back Save Save Save • Copies created with the filter effects option can be 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 recognized by the c icon displayed in playback mode.
Editing Images (Still Images) a Crop: Creating a Cropped Copy Create a copy containing only the portion visible in the monitor when u is displayed with playback zoom (A31) enabled. Cropped copies are stored as separate files. Enlarge the image for cropping (A31). Refine copy composition.
Connecting the Camera to a TV (Playback on a TV) Connect the camera to a television using the included audio/video cable to play back images on a television. Turn off the camera. Connect the camera to the TV. • Connect the yellow plug to the video-in jack and the white plug to the audio-in jack on the TV.
Connecting the Camera to a Printer (Direct Print) Users of PictBridge-compatible (F17) printers can connect the camera directly to the printer and print images without using a computer. Follow the procedures below to print images. Take pictures Select images for printing and number of copies using Print order option (E36) Connect to printer (E19)
Connecting the Camera to a Printer (Direct Print) Connecting the Camera to a Printer Turn off the camera. Turn on the printer. • Check printer settings. Connect the camera to the printer using the included USB cable. • Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do not use force when connecting or disconnecting the plugs.
Connecting the Camera to a Printer (Direct Print) Printing Images One by One After properly connecting the camera to the printer (E19), follow the procedure described below to print an image. Use the multi selector to choose the desired Print selection image and press the k button.
Connecting the Camera to a Printer (Direct Print) Choose Start print and press the k button. PictBridge 0 0 4 prints Start print Copies Paper size Printing begins. • Monitor display returns to the print selection screen shown in step 1 when printing is complete. Printing •...
Page 126
Connecting the Camera to a Printer (Direct Print) Choose the desired paper size and press the Paper size k button. Default 3.5×5 in. • To specify paper size using printer settings, choose 5×7 in. Default in the paper size menu. 100×150 mm 4×6 in.
Page 127
Connecting the Camera to a Printer (Direct Print) Print all images One copy each of all images stored in the Print all images internal memory, or on the memory card, is printed. 0 1 8 prints • When the menu shown at right is displayed, choose Start print and press the k button to start printing.
The Shooting Menu (for A (Auto) Mode) • See “Changing the Image Size (Image Mode)” (A60) for information about Image mode. White Balance (Adjusting Hue) On the A (auto) mode shooting screen M d button M White balance The color of light reflected from an object varies with the color of the light source. The human brain is able to adapt to changes in the color of the light source, with the result that white objects appear white whether seen in the shade, direct sunlight, or under incandescent lighting.
The Shooting Menu (for A (Auto) Mode) Preset Manual The preset manual option is effective with mixed lighting or to compensate for light sources with a strong color cast when the desired effect has not been achieved with white balance settings like Auto and Incandescent (for example, to make pictures taken under a lamp with a red shade look as though they had been shot under white light).
The Shooting Menu (for A (Auto) Mode) Continuous On the A (auto) mode shooting screen M d button M Continuous Enable continuous shooting or BSS (Best Shot Selector). Option Description U Single One picture is taken each time the shutter-release button is (default setting) pressed.
Page 131
The Shooting Menu (for A (Auto) Mode) Notes About Continuous Shooting • When Continuous, BSS, or Multi-shot 6 is selected, flash is disabled. Focus, exposure, and white balance are fixed at the values determined with the first image in each series. •...
The Shooting Menu (for A (Auto) Mode) ISO Sensitivity On the A (auto) mode shooting screen M d button M ISO sensitivity The higher the sensitivity, the less light is needed to expose an image, allowing capturing darker subjects. Additionally, even with subjects of similar brightness, pictures can be taken at faster shutter speeds, and blurring caused by camera shake and subject movement can be reduced.
The Shooting Menu (for A (Auto) Mode) Color Options On the A (auto) mode shooting screen M d button M Color options Make colors more vivid or save images in monochrome. Option Description n Standard color Use for images exhibiting natural color. (default setting) o Vivid color Use to achieve a vivid, “photoprint”...
The Shooting Menu (for A (Auto) Mode) AF Area Mode On the A (auto) mode shooting screen M d button M AF area mode Use this option to determine how the camera selects the focus area for autofocus. Option Description When the camera detects a human face, it focuses on that face.
Page 135
The Shooting Menu (for A (Auto) Mode) Option Description Select one of 99 focus areas in the Focus area monitor. This option is suited to situations in which the intended subject is relatively still and not positioned at the center of the frame. Press the multi selector H, I, J, or K to move the focus area to the position where you want to focus,...
The Shooting Menu (for A (Auto) Mode) Using Subject Tracking On the A (auto) mode shooting screen M d button M AF area mode M Subject tracking Use this function to take pictures of moving subjects. When a subject is registered, the camera automatically moves the focus area to track the subject.
The Shooting Menu (for A (Auto) Mode) Autofocus Mode On the A (auto) mode shooting screen M d button M Autofocus mode Choose how the camera focuses. Option Description A Single AF The camera focuses when the shutter-release button is (default setting) pressed halfway.
Smart Portrait Menu • See “Changing the Image Size (Image Mode)” (A60) for information about Image mode. Skin Softening On the smart portrait mode screen M d button M Skin softening Enable skin softening. Option Description S High When the shutter is released, the camera detects one or more human faces (up to three), and processes the image to R Normal (default setting) soften facial skin tones before saving the image.
Smart Portrait Menu Blink Proof On the smart portrait mode screen M d button M Blink proof The camera automatically releases the shutter twice each time a picture is taken. Of the two shots, one in which the subject’s eyes are open is saved. Option Description Enables blink warning.
The Playback Menu • See “Editing Images (Still Images)” (E10) for information about image editing features. a Print Order (Creating a DPOF Print Order) Press the c button (playback mode) M d button M a Print order When printing images stored on the memory card using any of the following methods, the Print order option in the playback menu is used to create digital “print orders”...
Page 141
The Playback Menu Choose whether or not to print shooting date Print order and photo information. • Choose Date and press the k button to print the Done shooting date on all images in the print order. • Choose Info and press the k button to print shutter Date Info speed and aperture value information on all images in...
Page 142
The Playback Menu Notes About Print Order When a print order is created in favorite pictures mode, auto sort mode or list by date mode, the screen shown below is displayed if images other than those in the selected album, or category, or captured on the selected shooting date, have been marked for printing.
Page 143
The Playback Menu Notes About Printing Shooting Date and Photo Information When the Date and Info options are enabled in the print order option, shooting date and photo information are printed on images when a DPOF-compatible (F17) printer which supports printing of shooting date and photo information is used.
The Playback Menu b Slide Show Press the c button (playback mode) M d button M b Slide show Play back images stored in the internal memory or on a memory card one by one in an automated “slide show.” Use the multi selector to choose Start and Slide show press the k button.
The Playback Menu d Protect Press the c button (playback mode) M d button M d Protect Protect selected images from accidental deletion. Select images to protect or cancel protection for previously protected images from the image selection screen. See “Selecting Images” (E42). Note that formatting the camera’s internal memory or the memory card will permanently delete protected files (E60).
The Playback Menu Selecting Images The image selection screen like that shown at right is Protect displayed with the following operations: • Print order>Select images (E36) • Protect (E41) • Rotate image (E43) Back ON/OFF • Copy>Selected images (E46) • Welcome screen>Select an image (E49) •...
The Playback Menu f Rotate Image Press the c button (playback mode) M d button M f Rotate image Specify the orientation in which recorded images are displayed with playback. Still images can be rotated 90 degrees clockwise or 90 degrees counterclockwise. Images that were recorded in portrait (“tall”) orientation can be rotated up to 180 degrees in either direction.
The Playback Menu E Voice Memo Press the c button (playback mode) M select an image M d button M E Voice memo Use the camera’s built-in microphone to record voice memos for images. • When playing back an image with no voice memo attached, the screen changes to the recording screen.
The Playback Menu Deleting Voice Memos In voice memo playback screen, press the l button. Press the multi selector H or I to choose Yes and File will be deleted. OK? press the k button. Only the voice memo will be deleted.
The Playback Menu h Copy (Copy Between Internal Memory and Memory Card) Press the c button (playback mode) M d button M h Copy Copy images between the internal memory and a memory card. Use the multi selector to select an option Copy from the copy screen and press the k button.
The Movie Menu Movie Options On the shooting screen M d button M D tab M Movie options Select the desired movie option to record. A larger image size improves the image quality and increases the file size. Option Description n HD 720p (1280×720) Movies with an aspect ratio of 16:9 are recorded.
The Movie Menu Autofocus Mode On the shooting screen M d button M D tab M Autofocus mode Select the autofocus method used when recording movies. Option Description Focus is locked when the b (e movie-record) button is pressed A Single AF (default to start recording.
The Setup Menu Welcome Screen Press the d button M z tab M Welcome screen Choose whether or not a welcome screen is displayed when the camera is turned Option Description None (default The camera enters shooting or playback mode without displaying setting) the welcome screen.
The Setup Menu Time Zone and Date Press the d button M z tab M Time zone and date Set the camera clock. Option Description Set camera clock to current date and Date and time time. Use the multi selector to set the date and time in the displayed screen.
The Setup Menu Press K. Time zone • The time zone selection screen is displayed. London, Casablanca 1 5 / 0 5 / 2 0 1 2 1 5 :3 0 Home time zone Travel destination Press J or K to choose the travel destination 1 0 : 3 0 –...
Page 156
The Setup Menu Time Zones The camera supports the time zones listed below. For time zone not listed below, set the camera clock to local time from the Date and time option. UTC +/– Location UTC +/– Location –11 Midway, Samoa Madrid, Paris, Berlin –10 Hawaii, Tahiti...
The Setup Menu Monitor Settings Press the d button M z tab M Monitor settings Set the options below. Option Description Choose information displayed in the monitor during shooting Photo info and playback mode. On (default setting): Image is automatically displayed in the monitor immediately after it is captured and the monitor Image review display returns to shooting mode.
The Setup Menu Print Date (Imprinting Date and Time) Press the d button M z tab M Print date The shooting date and time can be imprinted on the images with shooting, allowing the information to be printed even from printers that do not support date printing (E39).
The Setup Menu Vibration Reduction Press the d button M z tab M Vibration reduction Reduce the effects of camera shake while shooting. Vibration reduction effectively reduces blur, caused by slight hand movement known as camera shake, which commonly occurs when shooting with zoom applied or at slow shutter speeds. The effects of camera shake are reduced when recording movies, in addition to when taking still pictures.
The Setup Menu Motion Detection Press the d button M z tab M Motion detection Enable motion detection to reduce the effects of subject movement and camera shake when shooting still images. Option Description When the camera detects subject movement or camera shake, the ISO sensitivity and shutter speed are automatically increased to reduce blurring.
The Setup Menu AF Assist Press the d button M z tab M AF assist Enable or disable AF-assist illumination, which assists autofocus operation when the subject is poorly lit. Option Description AF-assist illumination is used to assist the focus operation when the subject is poorly lit.
The Setup Menu Sound Settings Press the d button M z tab M Sound settings Adjust the following sound settings. Option Description Select On (default setting) or Off. When On is selected, a beep will sound once when operations are completed successfully, Button sound twice when the camera acquires focus on the subject, and three times when an error is detected.
The Setup Menu Format Memory/Format Card Press the d button M z tab M Format memory/Format card Use this option to format the internal memory or a memory card. Formatting the internal memory or memory cards permanently deletes all data. Data that has been deleted cannot be restored. Be sure to transfer important images to a computer before formatting.
The Setup Menu Language Press the d button M z tab M Language Choose one of 29 languages for display of camera menus and messages. Czech Russian Danish Romanian German Finnish (default setting) Swedish Spanish Vietnamese Greek Turkish French Ukrainian Indonesian Arabic Italian...
• When the camera is connected to a computer, an application installed on the computer, such as Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of charging the battery, exit the application.
Page 167
The Setup Menu Charge Lamp The following chart explains charge lamp status when the camera is connected to a computer. Charge lamp Description Flashes slowly Battery charging. (green) Battery not charging. When the charge lamp changes from slow flashing (green) to off while the power-on lamp is lit, charging is complete.
The Setup Menu Blink Warning Press the d button M z tab M Blink warning Specify whether or not the camera detects human subjects that have blinked when shooting with face detection (A64) in the following modes. • A (auto) mode (when Face priority (E30) is selected for AF area mode option).
Page 169
The Setup Menu Operating the Blink Warning Screen When the Did someone blink? screen shown on the Did someone blink? right is displayed in the monitor, the operations described below are available. If no operations are performed within a few seconds, the camera automatically returns to shooting mode.
The Setup Menu Eye-Fi Upload Press the d button M z tab M Eye-Fi upload Option Description Upload images created by the camera to a preselected b Enable destination. c Disable Images will not be uploaded. (default setting) Notes About Eye-Fi Cards •...
The Setup Menu Reset All Press the d button M z tab M Reset all When Reset is selected, the camera’s settings will be restored to their default values. Basic Shooting Functions Option Default value Flash mode (A53) Auto Self-timer (A55) Macro mode (A56) Exposure compensation (A57) Shooting Menu...
Page 172
The Setup Menu Smart Portrait Menu Option Default value Skin softening (E34) Normal Smile timer (E34) Blink proof (E35) Movie Menu Option Default value When using a memory card: n HD 720p (1280×720) Movie options (E47) When using the internal memory: m VGA (640×480) Autofocus mode (E48) Single AF...
The Setup Menu Others Option Default value Paper size (E20, E21) Default Frame interval for slide show (E40) • Choosing Reset all also clears the current file number (E70) from memory. Numbering will continue from the lowest number available. To reset file numbering to “0001”, delete all images stored in the internal memory or on the memory card (A32) before selecting Reset all.
• Files are stored in folders named with a folder number followed by a five- character identifier: “P_” plus a three-digit sequential number for images captured in Panorama assist scene mode (e.g. “101P_001”; E2) and “NIKON” for all other images (e.g. “100NIKON”). When the number of files within a folder reaches 9999, a new folder will be created.
Optional Accessories Rechargeable Rechargeable Li-ion Battery EN-EL19 battery Charging AC 1, 2 Charging AC Adapter EH-69P Adapter Battery Charger MH-66 Battery charger (Charging time when no charge remains: Approx. 1 h 50 min) AC Adapter EH-62G (connect as shown) AC adapter Be sure that the power connector cord has been properly aligned in power connector and battery chamber grooves before closing the battery-chamber/memory card slot cover.
Error Messages The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them. Display Cause/Solution Clock not set. O (flashes) Set date and time. Battery exhausted. Charge or replace the battery. 14, 16 Battery temperature is high.
Page 177
Error Messages Display Cause/Solution Memory card has not been formatted for use in COOLPIX Card is not S3300. formatted. Format Formatting deletes all data stored on the memory card. If card? you need to keep copies of any images, make sure to select No and save the copies to a computer or other medium before formatting the memory card.
Page 178
An error occurred in camera’s internal circuitry. Turn camera off, remove and reinsert battery, and turn System error 14, 21 camera on. If error persists, contact retailer or Nikon- authorized service representative. An error occurred with the printer. Printer error: check Check printer.
Page 179
Error Messages Display Cause/Solution Paper has jammed in the printer. Printer error: paper Remove the jammed paper, select Resume and press – the k button to resume printing.* No paper is loaded in printer. Printer error: out of Load the specified paper, select Resume and press the –...
Technical Notes and Index Maximizing Camera Life and Performance ....F2 Memory Cards........................F5 Cleaning...........................F6 Storage ..........................F6 Troubleshooting.............F Specifications..............F Supported Standards....................F17 Index ................F 8...
Technical Notes and Index Maximizing Camera Life and Performance To ensure continued enjoyment of this Nikon product, observe the precautions described below in addition to the warnings in “For Your Safety” (Avi) when using or storing the device. The Camera Keep Dry The device will be damaged if immersed in water or subjected to high humidity.
Page 183
• Images in the monitor may be difficult to see under bright lighting. • The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon-authorized service representative.
Maximizing Camera Life and Performance The Battery • Check the battery level before using the camera and replace or charge the battery if necessary. Do not continue charging once the battery is fully charged as this will result in reduced battery performance.
Maximizing Camera Life and Performance Charging AC Adapter • The Charging AC Adapter EH-69P is for use only with compatible devices. Do not use with another make or model of device. • The EH-69P is compatible with AC 100-240 V, 50/60 Hz electrical outlets. When using in other countries, use a plug adapter (available commercially) as necessary.
Maximizing Camera Life and Performance Cleaning Avoid touching the lens with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove fingerprints Lens or other stains that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts at the center of them and working...
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Display, Settings and Power Supply Problem Cause/Solution • Confirm all connections. 88, E62 • Off is selected for Charge by computer in the setup menu.
Page 188
Troubleshooting Problem Cause/Solution • The camera is off. • Battery is exhausted. • Standby mode for saving power. Press the power switch, shutter-release button, A button, c button, or b (e movie-record) button. Monitor is blank. • When flash lamp flashes, wait until flash has charged.
Page 189
Turn the camera off, remove and reinsert the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred.
Page 190
Troubleshooting Problem Cause/Solution Smear may occur when extremely bright light strikes the image sensor. When shooting with Streaks of light or partial E27, Continuous set to Multi-shot 6 and when discoloration are visible in recording movies, avoiding bright objects, such the monitor.
Page 191
Troubleshooting Problem Cause/Solution Images appear smeared. Lens is dirty. Clean lens. 37, 43, Colors are unnatural. White balance does not match light source. Shutter speed is too slow or ISO sensitivity is Randomly spaced bright high as the subject is dark. Noise can be pixels (“noise”) appear in reduced by: image.
Page 192
Troubleshooting Problem Cause/Solution When shooting with backlighting or when a very strong light source (such as sunlight) is in Colored circles or light the frame, colored circles or light streaks streaks appear in the (ghosting) may occur. Change the position of –...
Page 193
• Confirm system requirements. connected to a computer. • Computer is not set to start Nikon Transfer 2 automatically. For more information on Nikon Transfer 2, refer to help information contained in ViewNX 2.
Specifications Nikon COOLPIX S3300 Digital Camera Type Compact digital camera Effective pixels 16.0 million Image sensor -in. type CCD; total pixels: approx. 16.44 million Lens 6× optical zoom, NIKKOR lens Focal length 4.6–27.6mm (angle of view equivalent to that of 26–156 mm...
Specifications ISO sensitivity (Standard • ISO 80, 100, 200, 400, 800, 1600, 3200 output sensitivity) • Auto (auto gain from ISO 80 to 1600) • Fixed range auto (ISO 80 to 400, 80 to 800) Exposure Metering 256-segment matrix, center-weighted (digital zoom less than 2×), spot (digital zoom 2×...
Page 196
Approx. 55 g (2.0 oz) (excluding plug adapter) For Argentina and Korea: Approx. 80 g (2.9 oz) Specifications • Nikon will not be held liable for any errors this manual may contain. • The appearance of this product and its specifications are subject to change without notice.
Specifications Supported Standards • DCF: Design Rule for Camera File System is a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. • DPOF: Digital Print Order Format is an industry-wide standard that allows images to be printed from print orders stored on memory cards.
Index Aperture value 28 Symbols Audio/video cable 72, E17, E71 A Auto mode 20, 24, 36 Auto flash 54 C Scene mode 39 Auto mode 36 D Special effects mode 47 Auto off 87, E59 F Smart portrait mode 49 Auto sort menu 71, E7 c Playback mode 30, 70 Auto sort mode 70, E7...
Index Compression ratio 60 Fisheye 71, E14 Connector cover 3 Fixed range auto E28 Continuous 37, E26 Flash 53 Copying pictures 71, E46 Flash lamp 53 Crop 31, E16 Flash mode 53, 54 Cross screen 71, E14 Flash off 54 Cyanotype 38, E29 Focus 28, 38, E30 Focus area 28...
Page 200
Rechargeable Li-ion battery 14, 16, Night landscape j 42 Red-eye reduction 54 Night portrait e 41 Remaining recording time 80 Nikon Transfer 2 74, 76 Removing favorite pictures E5 Nostalgic sepia E 47 Reset all 88, E67 Number of exposures remaining 20, 61...
Page 201
Index Shooting menu 37, E24 Shooting mode 8, 24 VGA 81, E47 Shutter sound 87, E59 Vibration reduction 87, E56 Shutter speed 28 Video mode 88, E61 Shutter-release button 2, 4, 5, 28 Video-in jack/audio-in jack E17 Single 37, E26 ViewNX 2 73 Single AF 38, 81, E33, E48 Vivid color 38, E29...
Page 204
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. YP2A01(11) 6MM23211-01...
Need help?
Do you have a question about the CoolPix S3300 and is the answer not in the manual?
Questions and answers