Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BenQ SP890
Summary of Contents for BenQ SP890
- Page 1 SP890 Digital Projector User Manual Welcome...
-
Page 2: Table Of Contents
Table of contents Important safety Using the preset and user modes ..27 Fine-tuning the picture quality...29 instructions ........3 Advanced picture quality controls..30 Overview ........6 Selecting the aspect ratio .....33 Shipping contents ........6 Hiding the image .........35 Remote control batteries .......7 Freezing the image.......35 Remote control operation.....7 Utilizing FAQ function .......35... -
Page 3: Important Safety Instructions
Thank you for your purchase of this quality BenQ projector! It has been designed to provide you with an enjoyable home theater viewing experience. For the best results, please read this manual through carefully as it is your guide through the control menus and operation. - Page 4 Liquids spilled into the projector will void your inverted images for ceiling mount installation. warranty. If the projector does become wet, Use only BenQ's Ceiling Mount Kit for disconnect it from the power point and call mounting. BenQ to have the projector repaired.
-
Page 5: Moisture Condensation
13. Never attempt to replace the lamp assembly Moisture condensation until the projector has cooled down and is Never operate the projector immediately after unplugged from the power supply. moving it from a cold location to a hot location. When the projector is exposed to such a change in temperature, moisture may condense on the crucial internal parts. -
Page 6: Overview
Overview Shipping contents Carefully unpack and verify that you have the items below. Some of the items may not be available depending on your region of purchase. Please check with your place of purchase. Some of the accessories may vary from region to region. The warranty card is only supplied in some specific regions. -
Page 7: Remote Control Batteries
BenQ projector ceiling mount kit and that you ensure it is securely and safely installed. If you use a non-BenQ brand projector ceiling mount kit, there is a safety risk that the projector may fall from the ceiling due to an improper attachment through the use of the wrong gauge or length screws. -
Page 8: Projector Features
Projector features • Full HD compatible The projector is compatible with Standard Definition TV (SDTV) 480i, 480p, 576i, 576p, and High Definition TV (HDTV) 720p, 1080i and 1080p formats, with the 1080p format providing a true 1:1 image reproduction. • High picture quality The projector provides excellent picture quality due to its high resolution, excellent home theater brightness, super high contrast ratio, vivid color and rich gray-scale reproduction. -
Page 9: Projector Exterior View
Projector exterior view Front and upper side view 1. Control panel (See "Control panel" on page 10 for details.) 2. Lamp cover 3. Front IR sensor 4. Vent (heated air exhaust) 5. Projection lens 6. Lens shift lever Rear view 7. -
Page 10: Controls And Functions
Controls and functions Control panel 6. Arrow/Keystone keys (Left / , Up Right / , Down / ) Moves the current On-Screen Display (OSD) menu selection in the direction of the arrow being pressed when the OSD menu is activated. Manually corrects distorted pictures resulting from an angled projection. -
Page 11: Remote Control
Remote control 5. ENTER Activates the selected On-Screen Display (OSD) menu item. 6. BLANK Used to hide the screen image. 7. VOLUME+/VOLUME- Adjusts the sound level. POWER Toggles the projector between standby mode and on. 9. FREEZE Freezes the projected image. 10. -
Page 12: Positioning Your Projector
Purchase the BenQ Projector Ceiling Mount Kit Note that a special rear projection screen and the from your dealer to mount your projector on the BenQ Projector Ceiling Mount Kit are required for ceiling. this installation location. *Set Ceiling Front after you turn the projector on. -
Page 13: Obtaining A Preferred Projected Image Size
Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting, and the video format each factors in the projected image size. This projector is equipped with a movable lens. See "Shifting the projection lens" on page 16 for details. -
Page 14: Projection Dimensions
Projection dimensions Installation for a 16:9 ratio screen Ceiling Installation Floor Installation <B> <A> <F> <D> <E> <A> <G> <B> <E> <G> <C> <D> <F> <C> <F>: Screen <G>: Center of lens <F>: Screen <G>: Center of lens The screen aspect ratio is 16:9 and the projected picture is 16:9 Screen dimensions Projection distance <D>... - Page 15 Installation for a 4:3 ratio screen The illustrations and table below are provided for those users who already have 4:3 aspect ratio screens or intend to purchase 4:3 aspect ratio screens to view 16:9 ratio projected images. Floor Installation Ceiling Installation <A>...
-
Page 16: Shifting The Projection Lens
Shifting the projection lens The lens shift control provides flexibility for installing your projector. It allows the projector to be positioned off the center of the screen. The lens shift is expressed as a percentage of the projected image height or width. It is measured as an offset from the projected image’s vertical or horizontal center. -
Page 17: Connecting With Video Equipment
Connecting with video equipment You can connect the projector to any type of video equipment, such as a VCR, DVD player, digital tuner, cable or satellite decoder, video game console or digital camera. You can also connect it to a desktop or laptop PC or Apple Macintosh system. -
Page 18: Connecting Component-Video Devices
Connecting component-video devices Be sure to match the corresponding colors between the cables and the terminals. The RCA type component video jacks are provided for connection to video output devices. The audio connections are provided for informational purposes only. You can also connect the separate audio cable to a suitable audio amplifier. AV equipment: DVD player, digital tuner, etc. -
Page 19: Connecting A Computer
Connecting a computer Connect the projector to a computer with a VGA cable. Laptop or desktop computer Audio cable VGA cable Speakers Audio cable Many laptops do not turn on their external video ports when connected to a projector. Usually a key combination like Fn + F3 or CRT/LCD key turns the external display on/off. -
Page 20: Using The Projector
Using the projector Preparations 1. Plug in and turn all of the connected equipment on. 2. If not already in, plug the supplied power cable into the AC inlet on the rear of the projector. 3. Plug the power cable into a wall power outlet and turn the wall switch on. -
Page 21: Selecting An Input Source
Press one of the Source keys on the remote control, or press SOURCE System Setup on the projector repeatedly until your desired signal is selected. Language English Splash Screen BenQ Projector Position Floor Front • Using the OSD menu Auto Off... -
Page 22: Using The Menus
OSD menu on. to select a preferred language. Picture -- Basic System Setup Picture Mode Cinema Language English Load Settings From Splash Screen BenQ Brightness + 50 Projector Position Floor Front Contrast + 50 Auto Off Disable + 50... -
Page 23: Utilizing The Password Function
Utilizing the password function For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security. The password can be set through the On-Screen Display (OSD) menu. Once the password is set and this function is selected, the projector is password-protected. Users who do not know the correct password can not use the projector. -
Page 24: Entering The Password Recall Procedure
0 2 1 2 Recall code: 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service center to decode the number. You may be required to provide proof of purchase documentation to EXIT Back verify that you are an authorized user of the projector. -
Page 25: Adjusting The Projected Image
Adjusting the projected image Adjusting the projection angle There are four adjuster feet on the bottom of the projector. These can be used if necessary to change the projection angle. Screw the feet in or out as appropriate to aim and level the projection angle. If the screen and the projector are not perpendicular to each other, the projected image becomes vertical trapezoidal. -
Page 26: Correcting Picture Distortion
Correcting picture distortion Keystoning occurs when the projector is not perpendicular to the screen and is where the projected picture displays visible as a trapezoid shape like either of the following: • Two parallel sides (left and right, or top and bottom) but is noticeably wider on either side. •... -
Page 27: Using The Preset And User Modes
Using the preset and user modes Selecting a preset mode The projector is preset with several pre-defined picture modes so that you can choose one to suit your operating environment and input source picture type. To select a picture mode that suits your need: •... -
Page 28: Resetting The Picture Mode
Setting the User 1/User 2 mode There are two user-definable modes if the current available picture modes are not suitable for your need. You can use one of the picture modes (except the selected User mode) as a starting point and customize the settings. -
Page 29: Fine-Tuning The Picture Quality
Fine-tuning the picture quality No matter what picture mode you have selected, you are able to fine-tune those settings to fit every presentation purpose. Those adjustments will be saved to the preset mode you are at when you exit the OSD menu. -
Page 30: Advanced Picture Quality Controls
Advanced picture quality controls There are more advanced functions in the Picture -- Advanced menu to be adjusted to your preference. To save the settings, just press MENU on the projector or MENU/EXIT on the remote control to leave the OSD menu. -
Page 31: Setting A Preferred Color Temperature
Setting a preferred color temperature To set a preferred color temperature: Color Temp User 1 Fine Tuning Red Gain 1. Highlight Color Temperature and select User 1, User 2, or User 3 by Green Gain Blue Gain pressing on the projector or remote control. Red Offset Green Offset 2. -
Page 32: Color Management
Color Management In most installation situations, color management will not be necessary, such as in classroom, meeting room, or lounge room situations where lights remain on, or where building external windows allow daylight into the room. Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. -
Page 33: Selecting The Aspect Ratio
Setting 3D Comb Filter This feature separates composite signal to Y (brightness) signal and C Picture -- Advanced (color) signal, and can help produce clearer and sharper images with Black Level 0 IRE correct colors in place. Clarity Control Color Temperature Color Temperature User_ Fine Tuning This function is only available when a Video signal is selected Gamma Selection... - Page 34 3. Letter Box (LB): Scales a picture to fit the projector’s native resolution in its horizontal width and resize the picture’s height to the 3/4 of the projection width. This may produce a picture greater in height than 16:9 picture can be displayed, so part of the picture is lost (not displayed) along the top and bottom edges of the projection.
-
Page 35: Hiding The Image
Hiding the image In order to draw the audience's full attention to the presenter, you can use BLANK on the remote control to hide the screen image. The word "BLANK" appears in the corner of the screen while the image is hidden. When this function is activated with an audio input connected, the audio can still be heard. -
Page 36: Adjusting The Sound
Adjusting the sound The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have made a correct connection to the projector audio input. See "Connecting with video equipment" on page 17 for how the audio input is connected. Muting the sound To temporarily turn off the sound: 1. -
Page 37: Controlling The Projector Through A Lan Environment
Controlling the projector through a Lan environment Lan Control Settings allow you to manage the projector from a computer using a web browser when the computer and the projector are properly connected to the same local area network. Configuring the Lan Control Settings If you are in a DHCP environment: 1. - Page 38 2. The remote network operation page opens. This page allows you to operate the projector as if you were using the remote control or control panel on the projector. • Menu (Exit) • Blank • Auto • Source "Remote control" on page 11 for details.
-
Page 39: Operating In A High Altitude Environment
The info page displays the information and status of this projector. Press Exit to go back to the remote network operation page. For more information, visit http://www.crestron.com & www.crestron.com/getroomview. Operating in a high altitude environment We recommend that you activate High Altitude Mode when your environment is higher than 1500 meters (around 4920 feet) above sea level, or whenever the projector will be used for extended periods of time (>10 hours) without shutdown. -
Page 40: Displaying More Than One Image Source Simultaneously
Displaying more than one image source simultaneously Your projector is capable of displaying pictures simultaneously from two input sources, which can be used to enhance your presentation in an interesting way. Ensure the signals you want to display are correctly connected to the projector. -
Page 41: Turning The Projector Off
Turning the projector off To turn the projector off, press POWER ( ) on the projector or remote control and a warning message appears. Press POWER ( ) again. • The Power indicator light flashes orange and the fans run for about two minutes to cool the lamp. -
Page 42: On-Screen Display (Osd) Menus
On-Screen Display (OSD) menus On-Screen Display (OSD) structure Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options Picture Mode Cinema/Dynamic/Presentation/sRGB/User 1/User 2 Load Settings From Brightness 0–100 Contrast 0–100 Picture -- Color 0–100 Basic... - Page 43 -15–+15 YPbPr Tuning Auto Disable/5 min/10 min/15 min/20 min/25 min/ Blank Timer 30 min Language Splash Screen BenQ/Blue/Black Floor Front/Ceiling Front/Floor Rear/Ceiling Projector Position Rear Disable/5 min/10 min/15 min/20 min/25 min/ Auto Off 30 min Disable/30 min/60 min/90 min/120 min/150...
-
Page 44: Advanced Setup
Main menu Sub-menu Options Lamp Power Normal/Economic Lamp Settings Reset Lamp Timer Equivalent Lamp Hour Auto HDMI Settings HDMI Format PC Signal Video Signal 2400/4800/9600/14400/19200/38400/57600/ Baud Rate 115200 Test Pattern High Altitude Mode On/Off Mute On/Off Audio Settings Volume Advanced Power On/Off Ring Tone On/Off Setup... -
Page 45: Picture Mode
Picture -- Basic menu Function Description Pre-defined picture modes are provided so you can optimize your projector Picture Mode picture set-up to suit your program type. See "Selecting a preset mode" on page 27 for details. Selects a preset mode that most suits your need for the picture quality and Load Settings From further fine-tune the picture based on the selections listed below. -
Page 46: Display Menu
Display menu Function Description There are several options to set the picture’s aspect ratio depending on your Aspect Ratio input source. See "Selecting the aspect ratio" on page 33 for details. Corrects any keystoning of the picture. See "Correcting picture distortion" on Keystone page 26 for details. -
Page 47: System Setup Menu
Allows you to select which logo screen will be displayed during projector start- Splash Screen up. You can choose BenQ logo screen, Blue screen or Black screen. The projector can be installed on a ceiling or behind a screen, or with one or Projector Position more mirrors. -
Page 48: Advanced Setup Menu
Expert Mode standards to obtain optimal picture quality from BenQ video display devices. Accordingly, we recommend that setup and calibration be performed by an ISF certified installation technician. -
Page 49: Information Menu
Information menu This menu shows you the current operating status of the projector. Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen. Function Description FAQ-Image and Installation Displays possible solutions to problems you may encounter. FAQ-Features and Service Source... -
Page 50: Additional Information
Additional information Care of the projector Your projector needs little maintenance. The only thing you have to do on a regular basis is keep the lens clean. Never remove any parts of the projector except the lamp. Contact your dealer or local customer service center if the projector fails to operate as expected. -
Page 51: Lamp Information
Setting Auto Off System Setup This function allows the projector to turn off automatically if no input Language English Splash Screen BenQ source is detected after a set period of time. Projector Position Floor Front Auto Off Disable Sleep Timer Disable To set Auto Off, go to the System Setup >... -
Page 52: Timing Of Replacing The Lamp
An old lamp may cause a malfunction in the projector and in some instances the lamp may explode. Go to http://lamp.BenQ.com for a replacement lamp. The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. - Page 53 Turn the power off and disconnect the Notes projector from the power outlet. Turn off all • Pulling it too quickly may cause the lamp to connected equipment and disconnect all other break and scatter broken glass in the projector. cables.
-
Page 54: Resetting The Lamp Timer
Resetting the lamp timer Do not reset the lamp timer if the lamp has not been replaced as this could cause damage. 1. After the start-up logo, press MENU on the projector or MENU/EXIT on the remote control, and then press until the Advanced Setup Advanced Setup Lamp Settings... -
Page 55: Indicators
When the projector is in an abnormal state Power Temp Lamp Status & Description • The lamp has been damaged. Please contact your local BenQ customer center for purchasing a new lamp. • The lamp is not properly attached. Orange •... -
Page 56: Troubleshooting
Troubleshooting Problem Cause Remedy Plug the power cable into the AC inlet on the rear of the projector, and plug the power cable There is no power from the power into to the power outlet. If the power outlet cable. has a switch, make sure that it is switched on. -
Page 57: Specifications
Specifications All specifications are subject to change without notice. Optical Projection system Single-chip DLP™ system. 0.65" DLP (1920 x 1080) DMD chip Lens F = 2.48 to 2.81, f = 24.1 to 36.15 mm Projection screen size 28" to 500" Lamp 300W Electrical... -
Page 58: Ceiling Mount Installation
Dimensions 428 mm x 318 mm x 169 mm (W x D x H) Ceiling mount installation Ceiling mount screws: M6 x 8 (Max. L = 8 mm) 151.2 211.7 Unit: mm 324.1 424.4 Additional information... -
Page 59: Timing Chart
Timing chart Supported timing for PC input Refresh rate H. Frequency Pixel Frequency Format Resolution (Hz) (KHz) (MHz) 59.94 31.469 25.175 72.809 37.861 31.5 640 x 480 640 x 480 37.5 31.5 85.008 43.269 56.25 35.156 60.317 37.879 800 x 600 800 x 600 72.188 48.077... - Page 60 Supported timing for HDMI (HDCP) input Format Resolution Refresh rate (Hz) H. Freq. (KHz) Pixel Freq. (MHz) Aspect 480i 720 x 480 59.94/60 15.734/15.75 27/27.027 16:9 480p 720 x 480 59.94/60 31.469/31.5 27/27.027 16:9 576i 720 x 576 15.625 16:9 576p 720 x 576 31.25...
-
Page 61: Warranty And Copyright Information
Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes. -
Page 62: Regulation Statements
Regulation statements FCC statement (for United States users) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 63 • All BenQ monitors and projectors come with user manuals on compact discs which could be easily read by commercial software such as Adobe Reader via a connected computer system. These documents are also available on the BenQ's web site (www.BenQ.com).
Need help?
Do you have a question about the SP890 and is the answer not in the manual?
Questions and answers