Scanning To Usb Memory - Konica Minolta bizhub 25 User Manual

3
Specify the FTP shortcut.
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press [Next
Doc]. To finish scanning, press [Complete].

Scanning to USB Memory

You can scan a document to a USB memory device that is directly connected to the
machine.
USB memory
Note
• Only USB memory formatted with FAT12, FAT16, or FAT32 can be used.
• Support cannot be guaranteed with USB memory with embedded security functions,
memory card readers connected via USB, USB memory connected via an extension
cable and USB hub, and/or USB memory that does not meet USB standards.
• If the USB memory becomes full during the scanning process the entire scan job
will be deleted. Therefore, make sure that the USB memory has enough free space
in advance.
• If you want to connect the USB memory via an extension cable, use a cable that is
shorter than three meters.
Scanning 2-15
1
2