Table of Contents
Advertisement
setting up your side-by-side
refrigerator
Removing any residual matter inside the water supply line after
installing filter.
1. Turn ON the main water supply & turn OFF the valve
to the water supply line.
2. Run water through the dispenser until the water runs
clear (approx. 1L). This will clean the water supply
system and remove air from the lines.
3. Additional flushing may be required in some
households.
4. Open the refrigerator door and make sure there are
no water leaks coming from the water filter.
A newly installed water filter cartridge may cause
water to briefly spurt from the water dispenser. This
is due to air getting into the line. It should pose no
problem to operation.
Check the amount of water supplied to the ice tray. (Optional)
1. Lift up the icemaker bucket and gently pull out of the freezer.
2. When you press the Test button for 1.5 seconds, the ice cube container is filled with water
from the water supply tap after ice tray is twisted. Check to make sure the amount of water is
correct(see the illustration below).
If the water level is too low, the ice cubes will be small. This is a water pressure problem from
with in the main water pipes, not the refrigerator.
1
Check the water level
Ice maker
Ice
Feeler Arm
Water
2
Test button
setting up _21
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RSA1SHPN and is the answer not in the manual?
Questions and answers
How do I move my Samsung Refidgerator RSA1SHPN
I have for many years a Samsung FF model RSA1SHPN which has ceased to work 2 days ago - no longer cooling either fridge or freezer although panel shows -18 and +3. I have removed the internal lower back panel and there is no sign of any frosting and the drain hole is free of water. It has had a small water leak from front base for about 2 years. Any ideas?
Possible causes for a Samsung FF model RSA1SHPN not cooling despite the temperature panel showing -18°C and +3°C include:
1. Door Left Open – If the refrigerator or freezer door was left open for an extended period, warm air may have entered, affecting cooling.
2. Blocked Ventilation – Obstruction of air vents inside the fridge or freezer can prevent proper airflow, reducing cooling efficiency.
3. Power Issues – Ensure the refrigerator is properly grounded and connected to a functioning power source.
4. Malfunctioning Components – Issues with the compressor, refrigerant circuit, or defrost system may cause cooling failure.
5. Vacation Mode Activated – If the Vacation button was pressed, the fridge compartment might be turned off.
6. Filter Issues – A clogged water filter may not directly affect cooling but could indicate maintenance is needed.
If none of these resolve the issue, contacting Samsung service support is recommended.
This answer is automatically generated