DPVM
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Note
Click the Config Database tab and then click the Create Row to insert a new entry.
Step 3
You see the Create Config Database dialog box shown in
Figure 28-6
Choose an available WWN and VSAN combination or fill in the pWWN and Login VSAN fields.
Step 4
Click Create to save these changes in the config or pending database or click Close to discard any
Step 5
unsaved changes.
Click the CFS tab and select the Config Action drop-down menu for the master database.
Step 6
You see the options shown in
Figure 28-7
Select commit from the drop-down menu to distribute these changes or abort to discard the changes.
Step 7
Cisco MDS 9000 Family Fabric Manager Configuration Guide
28-6
You must click on the CFS tab inorder to activate the other tabs
Create Config Database
Figure
Config Action Drop-down Menu
Figure
28-7.
Chapter 28
Creating Dynamic VSANs
28-6.
OL-17256-03, Cisco MDS NX-OS Release 4.x