6.3
Intel
ROM Utility
The Intel
®
Matrix Storage Manager Option ROM utility allows you to create RAID 0,
RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives
that are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Intel
1.
Install all the Serial ATA hard disk drives.
2.
Turn on the system.
3.
During POST, press <Ctrl+I> to display the utility main menu.
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
0
1
2
3
[↑↓]-Select
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
6-24
®
Matrix Storage Manager Option
®
Matrix Storage Manager option ROM utility:
Copyright(C) 2003-09 Intel Corporation.
1. Create RAID Volume
2. Delete RAID Volume
[
DISK/VOLUME INFORMATION
Serial #
ST3160812AS
9LS0HJA4
ST3160812AS
9LS0F4HL
ST3160812AS
3LS0JYL8
ST3160812AS
9LS0BJ5H
All Rights Reserved.
[
MAIN MENU
]
3. Reset Disks to Non-RAID
4. Recovery Volume Options
5. Exit
]
Size
149.0GB
149.0GB
149.0GB
149.0GB
[ESC]-Exit
[ENTER]-Select Menu
*
= Data is Encrypted
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 6: RAID configuration
Need help?
Do you have a question about the RS100-E6 PI2 and is the answer not in the manual?
Questions and answers