Do you have a question about the D5424 and is the answer not in the manual?
Questions and answers
Greg
March 17, 2025
What can I do to deal with Error Message:F10 ?
It is said in manual as: OVERFILLING.
How should I make the Dishwasher back to work ?
Ken Cairns
April 13, 2025
I have an ASKO D5424 dish washer, which is now about 15 years old. I am getting an Error Code F 12. On startup, water flows into the machine but after about one minute, the machine stops and the F 12 Code appears. Could the pressure limiting valve be the problem and if so, what is the fix.
1 comments:
Mr. Anderson
April 14, 2025
Error Code F12 on an ASKO D5424 dishwasher indicates inlet valve leakage. The recommended action is to turn off the water supply valve and contact the Customer Care Center. It is also advised to turn off the machine using the main power switch and then turn it on again to clear the error message.
A pressure limiting valve could potentially cause this issue if it restricts water flow or pressure in a way that affects the inlet valve’s operation, leading to leakage or improper function.
Dishwasher Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and ful ll your needs for many years to come. Scandinavian design combines clean lines, everyday functionality, and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world.
Contents Before washing for the first time Service Read the operating instructions Warranty Be careful with certain materials How to contact ASKO Appliances Inc. Checking water hardness Quick guide Program key Important safety instructions Winter storage/Transport Overflow guard function Care and maintenance...
Before washing for the first time Do you need this Use&Care Guide in Spanish? Log on to www.askousa.com/customer-care to download. ¿Necesita esta Instrucciones de uso y cuidado en español? Entre en www.askousa.com/customer-care y descárguesela. Read the operating instructions Read through the operating instructions before using the dishwasher, especially the sections Important safety instructions, Child safety, and Dishwashing.
Important safety instructions SAVE THESE INSTRUCTIONS FOR FUTURE the gas is flammable, do not smoke or use an open REFERENCE flame during this time. • When removing an old dishwasher from service or discarding it, remove the door to the washing compartment.
Child safety Activate child lock (button lock) TIP! You can activate the child lock (button lock) to prevent Dishwasher detergents and rinse aids are corrosive, children from starting the dishwasher (see the section so always keep them out of reach of children. Settings).
Dishwasher components* Filters Spray arms Cutlery basket Serial number plate Detergent compartment Lower basket Main power switch Rinse aid compartment Upper basket Panel *Specifications may differ depending on the model and market. Customer Care Center 1-800-898-1879 www.askousa.com...
Dishwasher baskets* Upper basket 1. Wine glass shelf 2. Knife guard Lower basket Cutlery basket *Specifications may differ depending on the model and market. Customer Care Center 1-800-898-1879 www.askousa.com...
Front panel The panel is fitted with touch buttons with audible feedback (see the chapter Settings). START P R O G STOP Program selector High temperature Daily wash Long dry Heavy wash Start Normal wash Stop Eco wash Display Quick wash Child lock (button lock) Rinse &...
Detergent/Rinse Aid Dispenser 1. Prewash detergent compartment 2. Main wash detergent compartment 3. Rinse aid compartment 4. Detergent compartment lid 5. Rinse aid compartment lid Customer Care Center 1-800-898-1879 www.askousa.com...
Economic dishwashing Run programs only with a full load Wait until the dishwasher is fully loaded before running a program, this way you save energy. Use the Rinse & Hold program to rinse the dishes if there are any unpleasant odors while you wait for the dishwasher to become fully loaded.
Fragile dishes Some cookware is not dishwasher safe. This can be for several reasons. Some materials cannot withstand high temperatures, others can be damaged by dishwasher detergent. Fragile decoration Porcelain with decoration on top of the glazing (the items feel rough) should not be washed in a dishwasher.
Dishwashing Below are step-by-step instructions to help you Cutlery basket achieve the best possible dishwashing results. Place cutlery with the handles facing down, except Load the baskets correctly for knives, and spread them out as much as possible. Ensure that spoons do not stack inside each other. Do not rinse dishes under running water before The cutlery basket is placed in the lower basket.
Page 13
Dishwashing a while. If this happens, run the Heavy wash program NOTE! with high temperature and two tablespoons of citric Use only dishwasher detergent! Liquid hand-washing acid or commercially available dishwasher cleaner in detergent must not be used as the foam that forms the detergent compartment (with no dishes in the prevents the dishwasher from operating effectively.
Dishwashing Press the main power switch Normal wash and close the door Use to wash normally soiled dishes, and even dishes with dried leftovers, such as plates, serving dishes, Select the program cups, glasses, and so on. Press the Program selector one or more times Eco wash until the desired program symbol lights.
Page 15
Dishwashing Program chart Customer Care Center 1-800-898-1879 www.askousa.com...
Dishwashing Select options NOTE! To select an option, press one of the option If the machine does not start within 2 minutes of the buttons. The field next to the button lights when last button press, the display returns to showing the the option is activated.
Settings Do as follows to open the settings menu: Turn off the dishwasher using the main power switch. Wait about five seconds. Then press the main power switch again. Wait until the numbers appear in the right-hand display before continuing to the next step. Within five seconds, press and hold the Program selector (wait for the audible signal confirming the PROG PROG...
Page 18
Settings Button Options Settings Description press (Off) Buzzer volume The dishwasher uses a buzzer to indicate when a program is finished or when a fault (Low) has occurred. (High) Press Start to save the setting value and continue to the next setting. (Off) Operation volume This sound is used to confirm each button...
Time remaining Once you have selected a program and options, the display indicates how long the program took the last time it was used.Once you have started the dishwasher, the display indicates how much program time remains. The remaining time is updated after the water for the final rinse has been heated.
Care and maintenance instructions The dishwasher tub is made of stainless steel and is 1. Turn the handle counterclockwise once. kept clean through normal use. However, if you have hard water, limescale deposits may form in the dishwasher. If this happens, run the Heavy wash program with high temperature and two tablespoons of citric acid or commercially available dishwasher cleaner in the detergent compartment (with no dishes...
Care and maintenance instructions Drain pump NOTE! The pump can be accessed from inside the Do not forget to reinstall the drain pump access dishwasher. cover. 1. Cut the power to the dishwasher by unplugging the unit from the power outlet. 2.
Page 22
Care and maintenance instructions Door When cleaning the edge around the door, use only a slightly damp cloth (with a little cleaner if necessary). WARNING! Do not use a spray bottle or the like around the door lock. This is to ensure that water does not penetrate the door catch and come into contact with the electrical components.
Rinse aid Select dosage The rinse aid dispenser can be adjusted between 0 Drying is faster if you use rinse aid. When the rinse (off) and 6. aid needs topping up, the above symbol lights on the display. Increase the rinse aid dosage: Top up with rinse aid •...
Error messages Display Type of fault Action Overfilling Call the Customer Care Center. Water outlet fault See "Possible causes" in the chapter Trou- bleshooting. Water inlet fault Check that the water supply valve is on. Inlet valve leakage Turn off the water supply valve and call the Customer Care Center Turn off the machine with the main power switch and then turn it on again to clear the error message from the display.
Troubleshooting Problem Possible causes Action The dishes are not clean. The spray arms do not rotate. Remove the arms and clean them. Check that the dishes are not blocking the spray arms. Detergent is too old. Detergent is a Avoid large packages. perishable product.
Page 26
Troubleshooting Problem Possible causes Action The dishwasher does not start. You have forgotten to turn on the main Pressing the main power switch. power switch. The door is not properly closed. Check. A fuse/circuit breaker has been Check. tripped. The plug is not plugged into the power Check.
Page 27
Troubleshooting Problem Possible causes Action Cannot close door. The baskets are not correctly posi- Check that the baskets are correctly tioned. positioned horizontally. Check that the dishes are not blocking the baskets from sliding properly into place. The touch buttons do not react when You have pressed the touch buttons Wait a moment then try again.
Technical information Information for test institute Energy standard USA: Energy label FTC, 10 CFR Part 430 Wash performance ANSI/AHAM DW-1-2005 CAN: Energy label CSA C 373-04 Program for test: Normal wash 130 °F (55 °C), No Options Dosages during testing Rinse aid dosage: Loading for wash performance test Upper basket with 10 place settings AHAM DW-1...
Page 29
90 days from the date of purchase. Lifetime ASKO replacement parts (labor cost not included) for the stainless steel tank if it exhibits a manufacturing defect such as cracking or rusting through. Service must be provided by an authorized ASKO service agent.
Page 30
5. Replacement parts or repair labor costs for units operated outside the continental United States. 6. Pickup and delivery. ASKO washers are designed to be repaired in the home. In no event shall ASKO Appliances Inc. be responsible for any incidental or consequential damages.
Page 31
Notes Customer Care Center 1-800-898-1879 www.askousa.com...
Quick guide Load the baskets Press the main power switch and close the door Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off large food particles before loading the Select a program and any dishwasher.
Need help?
Do you have a question about the D5424 and is the answer not in the manual?
Questions and answers
What can I do to deal with Error Message:F10 ? It is said in manual as: OVERFILLING. How should I make the Dishwasher back to work ?
I have an ASKO D5424 dish washer, which is now about 15 years old. I am getting an Error Code F 12. On startup, water flows into the machine but after about one minute, the machine stops and the F 12 Code appears. Could the pressure limiting valve be the problem and if so, what is the fix.
Error Code F12 on an ASKO D5424 dishwasher indicates inlet valve leakage. The recommended action is to turn off the water supply valve and contact the Customer Care Center. It is also advised to turn off the machine using the main power switch and then turn it on again to clear the error message.
A pressure limiting valve could potentially cause this issue if it restricts water flow or pressure in a way that affects the inlet valve’s operation, leading to leakage or improper function.
This answer is automatically generated