Computer Setup-Power; Computer Setup-Boot - HP dx7500 - Microtower PC Utility Manual

Table 2 Computer Setup—Advanced (continued)
Internal Speaker
Supervisor Password
User Password
Onboard 1394
Change Supervisor
Password
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3 Computer Setup—Power
Option
After AC Power Failure Allows you to select system restart behavior after power loss:
XD
Virtualization
Technology
Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 4 Computer Setup—Boot
Option
Boot-time Diagnostic
Screen
(Boot Device Priority)
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
4 Computer Setup (F10) Utility
Allows you to set the internal speaker to:
●
Disabled
●
Enabled
Allows you to view the supervisor password.
Allows you to view the user password.
Allows you to enable/disable all 1394 ports.
Allows you to change the supervisor password.
Description
●
Stay Off
● Power On
●
Auto
Disables/enables XD bit.
Allows you to enable/disable Virtualization Technology.
Description
Disables/enables POST diagnostic messages display.
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●
Floppy Group
●
CD-ROM Group
●
Hard Drive Group
●
Network Boot Group
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
ENWW