Audio Modes; Incoming Call Features - Motorola MC9094-KUCHJERA6WR - MC9094-K - Win Mobile 6.1 Professional 624 MHz User Manual

Incoming Call
Figure 4-3
To ignore the incoming the call tap
provider.
To end the call tap
End

Audio Modes

The mobile computer offers two audio modes to use during phone calls:
Speaker Mode: Use the mobile computer as if on speaker phone. Tap the Speaker On button to activate
•
this mode.
Headset Mode: Connect a headset to the headset jack to automatically switch audio to the headset.
•
Speaker Button
Figure 4-4

Incoming Call Features

If you receive a call while in a call, tap Wait to place the call in call waiting.
•
You can use other programs on the mobile computer during a call. To switch back to Phone, tap Talk or
•
tap >
Start Phone
If a caller isn't in your contact list, create a contact during the call or from Call History by tapping
•
Save to Contacts
To terminate a call when a second call comes in and answer the waiting call, tap End on the Phone
•
keypad to disconnect the active call, then tap Answer or press the Send key to answer the waiting call.
To hold the current call and answer a waiting call, tap Answer or press the Send key to place the current
•
call on hold and answer the incoming call.
To put a call on hold to call another number or answer an incoming call, tap Hold. To move from one call
•
to another, tap Swap.
. This may send the caller to voice mail, depending on the service
Ignore
or press the red dot key on the mobile computer keypad.
. Tap End to end the call.
.
Using MC9094 Phone
Menu
4 - 3
>