Advertisement
Operation
Color Code
To start
Close and latch door. Press START/CANCEL pad.
BK......................... Black
To delay start
Close and latch door. Press DELAY START pad to select desired
BU............................Blue
delay time.
PK............................Pink
To select a new
R...............................Red
Press desired cycle and/or option pad. The indicator lights will change. Press
cycle or option
R-BK...............Red/Black
START/CANCEL within 15 seconds to begin cycle.
R-Y................Red/Yellow
To cancel cycle
Press START/CANCEL. Dishwasher will drain for 90 seconds, then shut off.
VIO.........................Violet
W...........................White
Water/Service Test
The water/service test is a special function
initiated from the power failure mode or idle
mode.
While in power failure mode - simultaneously
press the HEAT DRY and START/CANCEL pads
1
FILL/DISPENSER
for 30 seconds.
2
FILL
3
WASH/HEAT
The dishwasher will then step through the test
4
PAUSE/HEAT
cycle per the chart. Pushing the START/CANCEL
5
WASH/HEAT
pad will advance the dishwasher to the next step.
6
WASH/HEAT/DISP.
7
DRAIN
While in idle mode - simultaneously press the HI
8
DRAIN/DRY HEAT ON
TEMP and START/CANCEL pads for 3 seconds.
TOTAL
WARNING
Disconnect electrical power at the fuse box
or circuit breaker box before servicing under
this product. Electrical power may be
present on some parts under this product,
even if not in use.
Failure to follow this warning could result in
serious injury or death.
60 1
0
0
0
1
1
1
0
0
0
1
0
0
0
0
1
0
0
0
27
1
60
0
1
0
1
0
1
1
0
0
0
0.4
0
0
0
1
0
1
1
0
0
0
0
0
75
0
1
0
1
0
1
0
0
0
0
0
0
60
0
1
0
1
1
1
90
0
0
1
0
0
1
0
0
0
0
90
1
0
0
0
1
X
0
0
0
0
0
1
488
0
1
X - denotes selectable option
CLEAN LED stays on until door is opened or cycle is started.
Cycle Selection Options
Display Codes (LED)
WASHING
---------------------- Wash portion of cycle.
SANITIZED
-------------------- The SANITIZED criteria has been met. Indicator light will switch off when door is opened.
DRYING
------------------------ Drying portion of cycle.
CLEAN
------------------------ Shows completion of cycle. Indicator light will switch off when door is opened.
OPTION LED's Flashing
ñ All LED's flashing indicates power failure has occurred. Press START/CANCEL pad and reselect desired options and cycle.
STATUS LED's Flashing
-- The STATUS LED's that are lit when the door is opened will flash. Close door.
Wiring Diagram
Advertisement
