The remaining charge indicator is incorrect.
The battery charge will quickly get used up and the actual remaining battery charge will be
•
lower than the indicator in the following cases:
When you use the camera in an extremely hot or cold location.
–
When you use the flash and zoom frequently.
–
When you repeatedly turn the power on and off.
–
–
When you set the screen brightness higher using DISP (screen display) settings.
The battery pack is discharged. Insert the charged battery pack (page 12).
•
The battery pack is dead. Replace it with a new one.
•
Cannot charge the battery pack while it is inside the camera.
You cannot charge the battery pack using the AC Adaptor (sold separately). Use the battery
•
charger (supplied) to charge the battery.
The CHARGE lamp flashes while charging the battery.
Remove and reinsert the battery pack, making sure it is installed correctly.
•
The temperature may be inappropriate for charging. Try charging the battery pack again
•
within the proper charging temperature range (10°C to 30°C (50°F to 86°F)).
Shooting still images/movies
Cannot record images.
•
Check the free capacity of the internal memory or "Memory Stick Duo" media (pages 26, 29).
If it is full, do one of the following:
–
Delete unnecessary images (page 32).
Change the "Memory Stick Duo" media.
–
You cannot record images while charging the flash.
•
When shooting a still image, set the mode switch to
•
Set the mode switch to
•
White, black, red, purple or other streaks appear on the image, or the image
seems reddish.
This phenomenon is called smearing. This is not a malfunction.
•
Viewing images
Cannot play back images.
Set the mode switch to
•
The folder/file name has been changed on your computer.
•
No guarantees are made for playing back, on this camera, files containing images which were
•
processed on a computer or images which were shot using other cameras.
•
The camera is in USB mode. Delete the USB connection.
(Movie) when shooting movies.
(Playback) (page 19).
(Still Image).
51
GB