Advertisement
Turn your computer ON, and connect the ZIP
6
power Supply. (The power cord fits in the groove on the
side of the drive.)
Always turn on power to your computer before or at the same
time as you supply power to your parallel port ZIP Drive. Power
must be applied to the ZIP Drive before DOS begins to load.
power supplies may damage your ZIP Drive.
n
Tip: To make it easier to move your ZIP Drive between home and
work, you may want to purchase an extra power supply and cable.
Call
E
PSON
7
Check the green power light to make sure the
power supply is OK.
If the power light does not come on, refer to "Troubleshooting"
in the "Using Your ZIP Drive" section.
Green Power Light
Amber Data Light -
(Flasher when drive is transferring data)
Use only an approved Epson, ZIP power supply. Other
Computer Power Cord
Printer Power Cord \
at 1-800-922-8911 to order ZIP accessories.
Advertisement
