Table of Contents
Advertisement
Configuring the Print Server Using EpsonNet
MacAssist EasySetup
You can also use EpsonNet MacAssist EasySetup to easily
configure the print server ready for TCP/IP and AppleTalk
printing within a short time.
Note:
Make sure the printer is turned on.
The computer to use for the following steps must be in the same
segment as the print server.
When you assign an IP address manually, we recommend you use
EpsonNet MacAssist to set the subnet mask and default gateway.
Follow the steps below to configure the print server using
EpsonNet MacAssist EasySetup.
1. Double-click the MacAssistxxx folder, and then double-click
the EpsonNet MacAssist EasySetup icon.
2. The EpsonNet MacAssist Easy Setup dialog box appears.
Click Next.
3. Read the License Agreement and then click Next.
4. Select the target printer and then click Next.
EpsonNet MacAssist Configuration Utility
4
4
4
4
4
4
4
4
4
4
4
4
95
Advertisement
Table of Contents
