Using The Self-Timer - Canon PowerShot SX500 IS User Manual

Common, Convenient Features
• Some shooting information is not displayed while the camera is
zoomed out.
•
During movie shooting, the white frame is not displayed if you
press the <
such as zooming will be recorded.
•
If you prefer to shoot at the zoom factor of the screen in step 1, press the
shutter button all the way down.
• You can adjust the zoom factor that the camera will revert to after Zoom
Framing Assist (when you release the <
lever as you hold the <
•
To adjust how much the camera zooms out when the <
pressed, press the <n> button and choose one of the three levels in
[ Display Area] on the [4] tab.
• The zoom factor cannot be changed with the <
the shutter button all the way down in self-timer mode (see below).

Using the Self-Timer

With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
62
> button. Also note that camera operating sounds
> button to resize the white frame.
1
Configure the setting.
z z
Press the <p> button, choose []] (either
press the <o><p> buttons or turn the
<5> dial), and then press the <m>
button.
Once the setting is complete, []] is
X X
displayed.
> button) by moving the zoom
> button is
> button after you press
Still Images Movies