HP A3550A - High Availability Disk Arrays Model 20 Storage Enclosure User Manual page 301

Key Action
N or n Scrolls to the next screen of entries.
P or p Scrolls to the previous screen of entries.
F or f Displays the first screen of entries.
L or l Displays the last screen of entries.
A or a Defines a filter to select event types by FRU or error code. For help, type A
then ?. A filter stays in effect until changed.
C or c Clears all entries from the Unsolicited Event Log.
Caution: The host computer relies on entries to report subsystem errors;
clearing the Log may remove recent entries before they reach the host.
D or d Dump the contents of the Unsolicited Event Log to the screen. The user is
asked for starting and ending event numbers. These must be valid numbers
(the end value must be greater than or equal to the start value), or an error
message is displayed. The default starting and ending values are the first
and last entries of the Unsolicited Event Log, respectively. The requested
entries are displayed one line at a time, in a format that allows a screen
capture program to capture them in a text file. The file can be viewed later
with a text editor. Pressing the E
operation.
G or g Go to a particular Unsolicited Event Log entry. When typed, the user is
asked for an event number (a full log typically contains more than 1000
events). The line number must be within the current range of events in the
log, or an error message is displayed. The Unsolicited Event Log is
displayed starting at the specified event number.
8-28
key during the dump terminates the
SC