NEC LCD5710-2-IT - MultiSync - 57" LCD Flat Panel Display User Manual page 29

IMAGE FLIP
SCAN MODE
*:INPUT DVD/HD, VIDEO only
SCAN CONVERSION
FILM MODE
*:INPUT DVD/HD, VIDEO only
MONITOR ID
IR CONTROL
TILE MATRIX
ADVANCED OPTION IMAGE FLIP
S-VIDEO MODE
NORMAL
BLACK LEVEL EXPANSION
H MIRROR
GAMMA SELECTION
V MIRROR
IMAGE FLIP
ROTATE
SCAN MODE
SCAN CONVERSION
FILM MODE
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU :SEL
ADVANCED OPTION
S-VIDEO MODE SCAN MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
OVERSCAN
SCAN MODE
SCAN CONVERSION
FILM MODE
+ -: SEL
:SEL SET :NEXT :RETURN :EXIT MENU
EXIT MENU
ADVANCED OPTION
S-VIDEO MODE SCAN CONVERSION
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
PROGRESSIVE
SCAN MODE
SCAN CONVERSION
FILM MODE
+ -: SEL
:SEL SET :NEXT :RETURN :EXIT MENU
EXIT MENU
ADVANCED OPTION
S-VIDEO MODE
FILM MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
SCAN MODE
SCAN CONVERSION
FILM MODE
+ -: SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
MONITOR ID
MONITOR ID
IR CONTROL
TILE MATRIX
ID No.
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET + -: SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
IR CONTROL
ADVANCED OPTION
NORMAL
MONITOR ID
PRIMARY
IR CONTROL
TILE MATRIX SECONDARY
HEAT STATUS LOCK
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL :NEXT :RETURN :EXIT MENU :SEL SET
SET EXIT MENU
ADVANCED OPTION TILE MATRIX
H MONITORS
MONITOR ID
V MONITORS
IR CONTROL
TILE MATRIX POSITION
HEAT STATUS
TILE COMP
POWER ON DELAY
ENABLE
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL
+ -: ADJ
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
Selects the image flip or rotation.
NORMAL: Normal display.
H MIRROR: Mirror image for horizontal direction.
V MIRROR: Mirror image for vertical direction.
EXIT :RETURN MENU :EXIT MENU
ROTATE: Rotate the image 180 degrees.
Changes the display area of the image.
/ UNDERSCAN OVERSCAN: Set to display area about 95%
UNDERSCAN: Set to display area about 100%
EXIT :RETURN MENU :EXIT MENU
Selects IP (Interlace to Progressive) converter function.
PROGRESSIVE: Enable the IP function, to convert interlace
signal to progressive. This setting is normally used.
/ INTERLACE
INTERLACE: Disable the IP function.
NOTE: The INTERLACE mode is better suited for motion
EXIT :RETURN MENU :EXIT MENU
pictures, but may cause image retention if used on a fixed
image.
Selects Film mode.
AUTO: Enable the Film mode function. This mode is
better suited for movies, which is converted 24 Frames/
sec source to DVD Video. We recommend to select
AUTO / OFF
"PROGRESSIVE" in "SCAN CONVERSION" when using
:RETURN :EXIT MENU
EXIT MENU
this mode.
OFF: Disable the Film mode function. This mode is
better suited for Broadcasting or VCR source.
Set the Monitor ID number when multiple MultiSync
LCD5710 monitors are daisy-chained together.
1
The Monitor ID can be set to a number between
EXIT :RETURN MENU :EXIT MENU
1 and 26.
Selects the infrared wireless remote controller mode
for use with the RS-232C daisy chain.
The item in this menu will become effective by pressing
"SET" button on the selected item.
NORMAL: The monitor will be controlled normally by
wireless remote controller.
PRIMARY: Set "PRIMARY" at the head of the daisy
chained monitors by RS-232C.
SECONDARY: Set "SECONDARY" after 2nd daisy
:SET EXIT :RETURN MENU :EXIT MENU
chained monitor.
LOCK: Disable the monitor control by infrared wireless
remote controller.
Keep pressing "DISPLAY" button for 5 sec or more, this
setting will return to "NORMAL".
The "TILE MATRIX" feature allows one image to be
displayed on multiple screens. This feature can be used
with up to 25 monitors. (5 horizontal x 5 vertical).
Using the Tile Matrix function requires the PC output
signal to be sent through a distribution amplifier to each
individual monitor.
H MONITORS: Selects the number of horizontal
displays.
1
1
V MONITORS: Selects the number of vertical displays.
1
YES / NO
YES / NO POSITION: Selects a position to expand the screen.
EXIT :RETURN
TILE COMP: Works in tandem with "TILE MATRIX" to
:EXIT MENU
MENU
compensate for the width of the tiled bezels in order to
accurately display the image.
ENABLE: Select "YES", to expand the signal to the
selected settings.
PIP, POP, SIDE by SIDE, STILL and DYNAMIC zoom
mode will be disabled when the "TILE MATRIX" is
activated.
English-27