Rear Panel Connections Area - Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Operating Instructions Manual

1. Functions in each area

1-9. Rear panel connections area

SLOT

2
SLOT

1
2
R SDI signal input connectors [DIGITAL INPUTS 1 to 4]
IN: SDI signal input; OUT: active through output (use this as a monitor output application).
S Optional input connector SLOT1 [INPUT 5, 6] (optional)
T Optional input connector SLOT2 [INPUT 7, 8] (optional)
A board (with built-in up-converter), whether an SDI input board, analog input board or DVI input board, can be
connected to each of these slots.
For further details, refer to the operating instructions of the optional board concerned.
U SDI signal output connectors [DIGITAL OUTPUTS PGM, OUTPUT 1, 2]
PGM: PGM output connectors
OUTPUT 1, 2: The signals for these connectors can be assigned using a menu.
V Optional output connector SLOT1 [OUTPUT 3, 4] (optional)
A board, whether an analog output board or DVI/analog output board (OUTPUT3: DVI, OUTPUT4: analog), can
be connected to this slot.
For further details, refer to the operating instructions of the optional board concerned.
W Optional output connector SLOT2 [OUTPUT 5, 6] (optional)
A board, whether an analog output board or DVI/analog output board (OUTPUT5: DVI, OUTPUT6: analog), can
be connected to this slot.
For further details, refer to the operating instructions of the optional board concerned.
X Reference input connector/BB output
connector [REF]
Loop-through output in the external sync mode.
If the loop-through output is not going to be used,
provide a 75-ohm termination.
BB signals output from both connectors in the internal
sync mode.
OUTPUTS
SLOT2 6 5
SLOT1 4 3
DVI/ANALOG OUTPUTS
Y Pb Pr DVI-I
ANALOG OUTPUTS
Y Pb Pr Y Pb Pr
SDI OUTPUTS SDI INPUTS
PGM 4 3
1 OUT IN OUT IN
 
 
INPUTS
8 7 SLOT2
6 5 SLOT1
DVI INPUTS
DVI-I DVI-I
ANALOG INPUTS
Y Pb Y Pb
Pr Pr
LAN RS-422
2 1
OUT IN OUT IN
 
<In the external synchronization mode>
REF
Input the external synchronization signal to the upper of
the two connectors shown above.
16

POWER
SLOT
2
～IN
SLOT
1
REF
TALLY GPI SIGNAL
GND
   
External synchronization signal input
Loop-through output
ON
OFF
