Table of Contents
Advertisement
PAL
Select this if the connected
TV is a PAL
system
TV. It will change the video
signals
of NTSC discs and output
them
in PAL
format.
MULTi
Select this if the connected
TV is
compatible
with both NTSC and PAL
formats
(such as a multi-system
TV). The
output
format
will be in accordance
with
the video signals of the disc.
NTSC
Select this if the connected TV is an NTSC
system
TV. It will change the video
signals
of PAL discs and output them in NTSC
format.
Select an item, and then press
ENTER/OK
to confirm
your selection.
Notes:
-
Before
changing
the current
TV
standard
setting,
ensure that your TV
supports
the selected
TV type.
-
If the picture is not displayed
properly
on your TV, wait for 15
seconds
for this unit to activate
automatic
recovery.
Setting
an aspect
ratio
for
your
TV
You canset the aspectratio of this
unit
to
match your TV. If the aspect ratio of your
TV is4:3, you do not need
to change
this
setting. If you have a wJdescreen
TV,
change this setting according
to the
following
procedure.
For details, see "Setting the TV display" on
page 2S.
1
Press SETUP.
2
Press I_ repeatedly to select "VIDEO
SETUP PAGE".
3
Press A/T
to highlight [TV DISPLAY],
and
then press _.
4
Press A/T
to highlight [16:9], and then
press
ENTER/OK
to confirm
the
selection.
10
Advertisement
Table of Contents
