LQ-2180
Figure 4-2. Destination Selection Screen
8. Check the printer to be adjusted for the destination; NLSP or
Standard, then select the destination and press the Enter key.
Be sure to select the proper destination. If you select
"Standard" despite you printer is NLSP version, the
printer may not print NLSP characters.
9. The following screen appears.
Adjustment
Figure 4-3. Main Menu Selection Screen
10. Select "Perform". The following screen appears.
„ Select "No" if you have input a wrong model name in
the screen shown in Figure 4-1.
„ If you select "Got", the printer flashes the model
name stored in the RAM to the EEPROM once and
reads it again.
Figure 4-4. Main Menu Screen
Overview
Revision A
34