Sanyo POAMD07MCI - Digital AV Player Install And Operation Instructions page 14

IMAGE PLAYBACK (OPERATING PROJECTOR)
1 Press MENU button and ON-SCREEN MENU
will appear. Press POINT LEFT/RIGHT button
to move a red frame pointer to VIEW Menu
icon.
2 Press POINT DOWN button to move a red
frame pointer to Auto play icon and then press
SELECT button. Auto play setting dialog box
will appear
3
On
When setting Auto play function on, move a red
arrow pointer to "On," adjust interval (sec.) by
pressing POINT LEFT RIGHT button, and then
press SELECT button. Projected image is
turned over to next automatically with interval.
This Auto play function can be pausing by
pressing POINT UP button and restarts with
POINT DOWN button.
✽ When auto play setting is previously set with
Media Card Imager (software), interval set by
Media Card Imager has priority over interval
with this menu.
Off
To cancel Auto play function, move a red arrow
pointer to "Off" and then press SELECT button.
Auto play setting set with Media Card Imager
(software) is also suspended by setting to "Off."
Quit
Closes Auto play setting dialog box.
Do not remove a memory card from Imager Box while Auto play function is
CAUTION
operated or Indicator of Imager Box is lighting or flashing. It may damage a
memory card or data in a memory card.
Before removing a memory card from Imager Box, be sure to set Auto play
function to "Off" or interrupt input signal from Imager Box by changing input
source.
14
AUTO PLAY FUNCTION
VIEW MENU
VIEW Menu icon
Auto play setting dialog box
Press POINT LEFT/RIGHT
button(s) to adjust the interval
and press SELECT button.