Duracell CEF14NC Specification Sheet

BENEFITS

Great Value, New Sleek & Compact Design, Convenient Wall Plug-In

FEATURES

Independent Channel Charging
•
Fully Charges cells in 6 hours*
•
Charges both AA and AAA NiMH cells
•
Ensures a full charge regardless of charge or battery capacity
LED Indicates Charge
•
Red = Charging
•
Green = Complete
•
Flashing Red = Error/Abnormal battery or abnormal temperature
Maintenance Charge Keeps Cells Fresh
International Charge Capability- device can be used worldwide with suitable converter plug

SAFETY

Microprocessor Controlled
•
Charge termination based on –dV/dt, temperature, and/or built-in timer
•
Over-temperature shutoff- prevents overheat of cell
•
Primary cell protection- will not charge non-rechargeable batteries
•
Low voltage battery protection- prevents overheat and damage to cell
•
Power protection circuit- resets whenever a battery is removed
*Charge rate and time is dependent on cell capacity, discharge state, and operating temperature.
Information and contents in this data sheet are for reference purposes only. They do not constitute any warranty and representation is
subject to change without notice. For most current information and further details, please contact Duracell.
Value Charger for NiMH Batteries
Class 2, Integrated Power Supply
Battery Charger:
Direct Plug-In Matches Local Requirements
Plug:
NiMH: 2 or 4 AA/HR6, NiMH: 2 or 4 AAA/HR03
Battery Type/Fit:
207 g
Typical Weight:
100-240V AC, 50-60 Hz, 7w
Input:
AA/HR6: 3.0V DC 360 mA
Output:
AAA/HR03: 3.0V DC 180 mA
Operating Temp: 0°C - 35°C (32°F - 95°F)
Dimensions: 123 mm (H) x 72 mm (W) x 42 mm (D)
Charge Sizes: AA , AAA
Technical
Berkshire Corporate Park
Bethel, CT 06801 U.S.A.
Tel: Toll free 1.800.544.5454
Web: www.duracell.com
Document #: CH-A
CEF14
BATTERIES