Table of Contents
Advertisement
Recording
Indications During Still Image Recording
1/125
.
Display Icon
1 IMAGE SIZE
Displays the icon of the image size.
0 The size of still images can be
changed.
" IMAGE SIZE " (A p. 104)
2 SHUTTER
Displays the shutter speed.
SPEED
3 Focus
Lights up in green when focused.
4 Recording in
Appears when a still image is being
Progress
captured.
5 Remaining
Displays the remaining number of
Number of
shots for still image recording.
Shots
6 Recording
Press the i.AUTO button to switch the
Mode
recording mode between P
(Intelligent Auto) and H (Manual).
7 Display Button
Some displays disappear after
approximately 3 seconds.
n
Use the n button to change the
displays as shown below.
0 Tap n button
Displays appear for approximately
3 seconds with every tap.
0 Tap and hold n button
Displays are fixed such that they
do not disappear. After setting, the
display button changes from n to
m.
Tap m to release the displays.
8 Battery
Displays the approximate remaining
Indicator
battery power.
Details of the battery power can be
displayed by pressing the INFO
button.
"Remaining Recording Time/Battery
Power" (A p. 54)
9 Recording
Displays the icon of the media where
Media
still images are recorded to.
The recording media can be
changed.
" REC MEDIA FOR IMAGE "
(A p. 111)
0 3D/2D Mode
Displays the current recording mode
of 3D or 2D. "3D" is displayed during
3D recording, while "2D" is displayed
during 2D recording.
30
[6630]
Description
Operation Buttons for Still Image Recording
.
Operation
Buttons
Parallax
1
Adjustment
T/W Zoom
2 /
3
Recording/
4
Playback Mode
Snapshot
5
Q
LCD Monitor
6
3D/2D Display
MENU
7
Display Button
8
n
[6630]
Description
Adjusts the effect when 3D or LR
MIX images are displayed on the
LCD monitor.
"Adjusting Parallax During
Recording" (A p. 32)
Allows the same functions as the
zoom lever to be performed.
Camera shake that often occurs
when using the zoom lever can
be minimized.
"Zooming" (A p. 28)
Switches between recording
and playback modes.
Functions as the SNAPSHOT
button. However, focus cannot
be set by pressing halfway.
Switches the display on the LCD
monitor between 3D and 2D.
Displays the various menus of
still image recording.
"Operating the Menu"
(A p. 85)
Some displays disappear after
approximately 3 seconds.
Use the n button to change the
displays as shown below.
0 Tap n button
Displays appear for
approximately 3 seconds with
every tap.
0 Tap and hold n button
Displays are fixed such that
they do not disappear. After
setting, the display button
changes from n to m.
Tap m to release the
displays.
Advertisement
Table of Contents
