Connecting To A Computer - VTech Kidizoom Camera User Manual

CONNECTING TO A COmPUTER

You can connect Kidizoom Camera™ to a PC or Mac using the included
USB cable. Once connected, you can upload and download files to
Kidizoom Camera™ by accessing your camera as a removable storage
device. When Kidizoom Camera™ is connected to a computer, a new
drive called "VTech 1069" will appear.
• Turn Kidizoom Camera™ OFF before connecting to a computer.
• Locate the USB port on the back of your camera and open the door.
• Insert the USB cable (small end) into the USB port on the camera.
• Insert the larger end of the USB cable into a USB port on the computer.
A USB port is usually marked with this symbol
• Download the taken photos from the folder "photo" in the drive.
• To upload photos to the unit, put the photos into the root folder of the
drive. DO NOT put them in the folder "photo", which is only for storing
the taken photos.
Note: To avoid data corruption, before uploading data to your computer
or downloading data to the camera, make sure that your Kidizoom
Camera™ does not have low battery levels.
MINIMUM SYSTEM REQUIREMENTS FOR COMPUTER CONNECTION:
®
Windows 2000 SP3+/ XP/Vista
®
Mac OS X 10.4 or above
Note: Once the camera is connected to your computer, do not disconnect
the camera or computer while files are uploading or downloading. After
you have finished, turn OFF
ACTIVITIES
1. CAMERA
• In Camera mode, you can look at the LCD screen to see the photo
subject.
the camera to save power.
.