Accessories; Standard Accessories; Optional Accessories - Hitachi CM4SB2 - 11.6 Amp Dry-Cut Masonry Circular Saw Instruction Manual

WARNING:
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

1 Box Wrench (Code No. 940543) ........................................................................................ 1
2 Wrench (Code No. 941057) ................................................................................................ 1
3 Washer (B) (Code No.956879 ) .......................................................................................... 1
Hole diameter 25/32" (20 mm) for Diamond Wheel
4 Diamond Wheel (Code No. 728726) .................................................................................. 1
Diameter 4" (104 mm), Hole diameter 7/8" (22.2 mm)
1
OPTIONAL ACCESSORIES ..... sold separately
Diamond Wheel
Diameter
4-1/8"
(106mm)
NOTE: Specifications are subject to change without any obligation on the part of the
HITACHI.

ACCESSORIES

ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which are
not intended for use with this tool. Contact HITACHI if you are not sure
whether it is safe to use a particular replacement part or accessory
with your tool.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
2
Hole diameter
25/32"
(20mm)
3
Thickness Code No.
3/64"
321192
(1.2mm)
English
4
17