Adding Embroidery Point Before The First Stitch - Brother BAS-311E Instruction Manual

Chapter 3 Programming with Command Function
4. The needle point moves to 1'.
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
Ending program
1. Press .
P
Adding sewing point before the first stitch
Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.
Moving to position 1.
1. Press and press
1
The work clamp moves to the start position.
148
A point is added before the current sewing point to
change the sewing start position.
The example in the left is used for explanation of
changing the sewing start position from 1 to 1'.
.
Programmer