Konica Minolta bizhub PRO 950 User Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. All in One Printer
  5. bizhub PRO 950 Series
  6. User manual

Konica Minolta bizhub PRO 950 User Manual

Bizhub pro 950 printer user guide
Hide thumbs Also See for bizhub PRO 950:
Table of Contents

Advertisement

Quick Links

See also: Troubleshooting Manual , User Manual
Chapter 1 :
Introduction
Chapter 2 :
Overview
Chapter 3 :
Installation of the printer driver (Windows)
(Easy installation using the installer)
Chapter 4 :
Installation of the printer driver (Windows)
(Manual installation using the Add Printer wizard)
Chapter 5 :
Installation of the printer driver (Macintosh)
Chapter 6 :
Uninstallation of the printer driver
Chapter 7 :
Basic Printing and Various Function
Chapter 8 :
PCL Printer Driver Setting (Windows)
Chapter 9 :
PostScript PPD Printer Driver setting (Windows)
Chapter 10 :
PostScript PPD Printer Driver setting (Mac OS X)
Chapter 11 :
Troubleshooting
Chapter 12 :
Font
Chapter 13 :
Utility Tool
Chapter 14 :
Appendix
Printer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the bizhub PRO 950 and is the answer not in the manual?

Questions and answers

Related Manuals for Konica Minolta bizhub PRO 950

Summary of Contents for Konica Minolta bizhub PRO 950

  • Page 1 Printer Chapter 1 : Introduction Chapter 2 : Overview Chapter 3 : Installation of the printer driver (Windows) (Easy installation using the installer) Chapter 4 : Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Chapter 5 : Installation of the printer driver (Macintosh) Chapter 6 : Uninstallation of the printer driver...

  • Page 2: Table Of Contents

    Table of contents Introduction Composition of User’s Guide ............1-4 Folder structure on the CD-ROM (bizhub PRO 950 Driver CD-ROM) ........... 1-6 Folder structure on the CD-ROM (PS-504 Driver CD-ROM for Windows) (Option) ......1-7 Folder structure on the CD-ROM (PS-504 Driver CD-ROM for Macintosh) (Option) ......
  • Page 3 Manual uninstallation ..............6-3 Macintosh ..................6-5 6.4.1 For Mac OS X (v10.5) ..............6-5 6.4.2 For Mac OS X (v10.3/v10.4) ............6-6 Basic Printing and Various Function Basic Printing Method ..............7-1 Various Function ................7-4 bizhub PRO 950...
  • Page 4 Cover Mode tab ................8-42 8.15 Stamp/Composition tab ..............8-49 8.16 Quality tab ..................8-56 8.17 Other tab ..................8-61 8.18 Favorite Setting ................8-63 8.19 About View Area ................8-66 PostScript PPD Printer Driver setting (Windows) bizhub PRO 950...
  • Page 5 Basic Troubleshooting ..............11-1 11.2 General Problems of Printing ............11-2 11.3 General Problems of PostScript ............ 11-4 11.4 Checking on Incomplete Jobs ............11-6 12 Font 12.1 Font List (PCL) ................12-1 12.2 Font List (PostScript) ..............12-4 bizhub PRO 950...
  • Page 6 13.3 UNIX Printing through TCP/IP ............. 13-24 13.4 ToneCurve Utility ................13-33 14 Appendix 14.1 Setting the Software Switch ............14-1 14.2 Procedure for installation with Linux ..........14-4 14.3 Glossary ..................14-10 14.4 Index ....................14-17 bizhub PRO 950...

  • Page 7: Introduction

    This User's Guide describes the operating procedures and safety precau- tions of the bizhub PRO 950 so that you can handle it safely and make the best of its capabilities. Usually keep this User’s Guide close at hand for the convenience of reference later.
  • Page 8 Citrix Systems, Inc. in the United States and in other countries. About the Citrix Technology Member KONICA MINOLTA BUSINESS TECHNOLOGIES, Inc. is a member of the Ci- trix Technology. Microsoft, MS and MS-DOS are registered trademarks of Microsoft Corpo- ration in the United States.
  • Page 9 Other company names and product names used in this User’s Guide are the registered trademarks or trademarks of their respective companies. COPYRIGHT © 2009 Konica Minolta Business Technologies, Inc., All rights reserved. COPYRIGHT © 2004 Adobe Systems Incorporated. All rights reserved.

  • Page 10: Composition Of User's Guide

    User’s Guide - Printer <This book> (User’s Guide CD) This guide describes the operation of the printer function equipped for the machine. Please refer to this guide for how to use PCL driver, Adobe PS driver and Pa- geScope Web Connection in user mode. bizhub PRO 950...
  • Page 11 The descriptions given in this manual are excerpts from the installation sec- tion of the User’s Guide (Printer). To operate safely, be sure to read “Section 1: Precautions for Installation and Use” in User’s Guide [Copier] before using the machine. bizhub PRO 950...

  • Page 12: Folder Structure On The Cd-Rom (Bizhub Pro 950 Driver Cd-Rom)

    Folder structure on the CD-ROM (bizhub PRO 950 Driver CD-ROM) The folders included on the accompanying bizhub PRO 950 Driver CD-ROM (Driver CD) for image controller are structured as shown below. This illustration will be helpful for locating specific folders or files.

  • Page 13: Folder Structure On The Cd-Rom (Ps-504 Driver Cd-Rom For Windows) (Option)

    - You may use the files in the EN folder. PS_DRIVER_CD_ROM AutoRun.exe Autorun.inf AutoRun.ini EN.ini JA.ini Driver Drivers AdobePS Linux (Printer Driver for Linux) Windows (Printer Driver for Windows) PS Plugin Driver (Printer Driver for Windows) Readme (Printer Driver Product Information) ScreenFont SETUPINI bizhub PRO 950...

  • Page 14: Folder Structure On The Cd-Rom (Ps-504 Driver Cd-Rom For Macintosh) (Option)

    - You may use the files in the EN folder. PS_DRIVER_CD_ROM Driver Drivers AdobePS OS_9X OS10_3_X (Printer Driver for MacOS X 10.3x - 10.4x /PPD pkg file) OS10_5_X (Printer Driver for MacOS X 10.5x /PPD pkg file) PSPlugin Driver OS9_X OS10_X Screenfont ATMLight ScreenFonts bizhub PRO 950...

  • Page 15: About This Manual

    Introduction About this Manual This document describes how to operate bizhub PRO 950 as a printer from various computers and networks. This manual assumes you are familiar with the basic operation of your oper- ating system and the KONICA MINOLTA copier.
  • Page 16 Introduction Chapter 14 Appendix This chapter lists and describes technical terms to read this manual. bizhub PRO 950 1-10...

  • Page 17: Notation Of Each Product

    The following abbreviations are used in this manual: 1. Image controller Image controller 2. PS-504 PostScript3 option PS3 option 3. bizhub PRO 950 Printer/Copier: copier (or main body printer) 4. A printing system that combines the above (1), (2) and (3) products: printing system 5.

  • Page 18: How To Read This Manual

    Click [OK] if a required setup is finished. The display returns to the [Print] dialog. [ ] are used for the terms displayed on the screens. bizhub PRO 950 This page does not exist in the document. bizhub PRO 950 1-12...

  • Page 19: Software License Agreement

    Introduction SOFTWARE LICENSE AGREEMENT SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Programs”), other software which runs on a computer system for use in conjunction with the Printing Software (“Host Software”), and related explanatory written materials (“Doc-...
  • Page 20 End Users acquire the Software with only those rights set forth herein. 12. You agree that you will not export the Software in any form in violation of any applicable laws and regulations regarding export control of any countries. bizhub PRO 950 1-14...
  • Page 21 Introduction SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system (“Printing Software”), the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Pro- grams”), other software which runs on a computer system for use in conjunc-...
  • Page 22 Agreement to the extent that this agreement contains provisions which relate to your use of the Software, Font Programs and Typefaces. Such provisions are made expressly for the benefit of Adobe and are enforce- able by Adobe in addition to KMBT. bizhub PRO 950 1-16...

  • Page 23: Overview

    Overview Overview The image controller feature enables the copier to connect to computers and networks to use as a printer. Copier bizhub PRO 950...

  • Page 24: Printer Driver

    Add Printer wizard)" on Page 4-1 and "Installation of the printer driver (Macintosh)" on Page 5-1 for more information about installation of printer driver. Refer to the “User’s Guide (PostScript3 Plug-in Driver)” for more informa- tion about Plug-in Driver. bizhub PRO 950...

  • Page 25: Composition Of A Product

    - Trimmer Unit option (TU-502) enables to select “Center Staple and Fold + Trim” function. Note Installing various options built in the copier properly on the printer driver allows you to use a variety of printing functions shared by the copier. bizhub PRO 950...

  • Page 26: Connections Of The Image Controller

    - Printing in which AppleTalk, Bonjour from Macintosh is used. (An optional PS expansion kit will be required.) - IPP (Internet Printing Protocol) printing - Printing in which Novell NetWare is used. 2.3.2 USB Connection The USB interface can be connected to a computer. bizhub PRO 950...

  • Page 27: Product Specifications

    Overview Product Specifications Type Type: Built-in box type for the KONICA MINOLTA Printer/ Copier Functions Resolution: Printing System: 600 x 600 dpi Scanning resolution: 200 dpi / 300 dpi / 400 dpi / 600 dpi Gradation: binary Printable Area: Standard: Margin 2.8 mm (left, right, top...

  • Page 28: Restrictive Conditions

    Although the Weekly Timer function of the main body printer is available in the Printer mode, the power is not turned off until the data output is finished when print data remains in the Image memory. Note Specifications are subject to change without notice. bizhub PRO 950...

  • Page 29: Installation Of The Printer Driver (Windows) (Easy Installation Using The Installer)

    “Setup64.exe” for the 64bit editions OS, and then proceed to Step – When a screen relevant to “User account control” is displayed while in installation in Windows Vista/Server 2008, click [Allow] or [Con- tinue]. Click [Printer Install]. bizhub PRO 950...
  • Page 30 If no copier is detected, If the printer is not detected, turn off this machine, then on again. When turning off the power, then on again, wait at least 10 seconds before turning it on again. Otherwise, this machine may not function properly. bizhub PRO 950...
  • Page 31 – The printer driver is installed and the [Finish Installing Drivers] win- dow appears. – If the Windows Logo Testing or Digital Signature dialog box ap- pears, click the [Continue] or [Yes]. Click [Finish]. Installation is completed. bizhub PRO 950...
  • Page 32 To change the printer name: ........[Rename Printer] To share the printer: ............[Share Setting] To see the property of printer: ..........[Property] To see the printing setup: ..........[Print Setting] To see the test page: ............ [Print Test Page] bizhub PRO 950...

  • Page 33: Installation Of The Printer Driver (Windows) (Manual Installation Using The Add Printer Wizard)

    Windows XP/Server • "Windows XP/Server 2003" on Page 4-15 2003 Windows 2000 • "Windows 2000" on Page 4-24 The Driver CD contains the PCL printer driver, and the PS Driver CD contains the PostScript PPD printer driver. bizhub PRO 950...

  • Page 34: Windows Vista/Server 2008

    Set the “Driver CD or PS Driver CD” in the CD-ROM drive. Click [Start] - [Control Panel]. Click [Hardware and Sound], and click [Printers]. – If Control Panel is displayed with Classic View, double-click “Printers”. Click [Add a printer]. bizhub PRO 950...
  • Page 35 – Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click [OK]. Printers list window appears. bizhub PRO 950...
  • Page 36 Insert the Driver CD into the CD-ROM drive of the computer. Click the [Start] button, and then click “Control Panel”. From “Hardware and Sound”, click “Printer”. – If Control Panel is displayed with Classic View, double-click “Print- ers”. The Printers window appears. bizhub PRO 950...
  • Page 37 When using an SMB connection, enter “\\NetBIOS name\print serv- ice name” in the “Enter a port name” box. – Enter the same NetBIOS name and print service name those appear in “Print Setting” in the SMB Setting screen of the copier. bizhub PRO 950...
  • Page 38 – Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. The “Printers” list appears.
  • Page 39 “Install this driver software anyway”. Click the [Finish]. After installation is completed, make sure that the icon of the installed printer appears in the Printers window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. bizhub PRO 950...

  • Page 40: Network Connection (Ipp Or Ipps)

    From “Hardware and Sound”, click “Printer”. – If Control Panel is displayed with Classic View, double-click “Print- ers”. The Printers window appears. Click “Add a printer” from the toolbar. The Add Printer window appears. Click “Add a network, wireless or Bluetooth printer”. bizhub PRO 950...
  • Page 41 – Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. The “Printer” list appears.

  • Page 42: Network Connection (Web Service Print)

    Found New Hardware Wizard dialog box appears. Click [Locate and install driver software (recommended)]. A screen for confirming the search method appears. Click [Do not search online]. Click [Browse my computer for driver software (advanced)]. bizhub PRO 950 4-10...
  • Page 43 – Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. The “Printer” list appears.
  • Page 44 – Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. bizhub PRO 950 4-12...

  • Page 45: Local Connection

    [Browse]. Specify the desired folder on the Driver CD or PS Driver CD that con- tains the printer driver, and then click the [Open]. – Select printer driver (PCL, PostScript PPD) to be used. bizhub PRO 950 4-13...
  • Page 46 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click [Next] and follow the on-screen instructions.

  • Page 47: Windows Xp/Server 2003

    For Windows XP, click “Add a printer” on the “Printer Tasks” menu. – For Windows Server 2003, double-click the “Add Printer” icon. The Add Printer Wizard starts. Click the [Next]. Select “Local printer attached to this computer”, and then click the [Next]. bizhub PRO 950 4-15...
  • Page 48 [Next]. – If the Additional Port Information Required dialog box appears, go to step 10. – If the Finish dialog box appears, go to step 13. Select “Custom”, and then click the [Settings]. bizhub PRO 950 4-16...
  • Page 49 – Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. The “Printer” list appears.

  • Page 50: Network Connection (Smb)

    For Windows XP, click “Add a printer” on the “Printer Tasks” menu. – For Windows Server 2003, double-click the “Add Printer” icon. The Add Printer Wizard starts. Click the [Next]. Select “Local printer attached to this computer”, and then click the [Next]. bizhub PRO 950 4-18...
  • Page 51 Click the [Browse]. Specify the desired folder on the Driver CD or PS Driver CD that con- tains the printer driver, and then click the [Open]. – Select printer driver (PCL, PostScript PPD) to be used. bizhub PRO 950 4-19...

  • Page 52: Network Connection (Ipp Or Ipps)

    Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. The “Printer” list appears.
  • Page 53 In the Specify a Printer dialog box, select “Connect to a printer on the Internet or on a home or office network”. In the “URL” field, enter the URL for the copier in the following format, and then click the [Next]. bizhub PRO 950 4-21...
  • Page 54 – Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. The “Printer” list appears.

  • Page 55: Local Connection

    Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [Next] and follow the on-screen instructions.

  • Page 56: Windows 2000

    Click the [Start] button, point to “Settings”, and then click “Printers”. Double-click “Add Printer”. – The Add Printer Wizard starts. Click [Next]. In the dialog box for specifying the connection method, select “Local printer”, and then click the [Next]. bizhub PRO 950 4-24...
  • Page 57 (9100 at default) in the “Port Number” box. – For an LPR connection, select “LPR”, and then enter “Print” in the “Queue name” box. – The information entered here is case-sensitive. Click the [Next]. Click the [Finish]. The Add Printer Wizard appears. bizhub PRO 950 4-25...
  • Page 58 – Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. The “Printer” list appears.

  • Page 59: Network Connection (Smb)

    Click the [Start] button, point to “Settings”, and then click “Printers”. Double-click “Add Printer”. – The Add Printer Wizard starts. Click [Next]. In the dialog box for specifying the connection method, select “Local printer”, and then click the [Next]. bizhub PRO 950 4-27...
  • Page 60 – Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. The “Printer” list appears.

  • Page 61: Network Connection (Ipp Or Ipps)

    Click the [Start] button, point to “Settings”, and then click “Printers”. Double-click “Add Printer”. – The Add Printer Wizard starts. Click [Next]. In the Local or Network Printer dialog box, select “Network printer”, and then click the [Next]. bizhub PRO 950 4-29...
  • Page 62 – Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. The “Printer” list appears.

  • Page 63: Local Connection

    Select printer driver (PCL, PostScript PPD) to be used. – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 950 Driver CD-ROM)” on page 1-6. Click the [OK]. and follow the on-screen instructions.

  • Page 64: Test

    [Properties] window. [KONICA MINOLTA 950 PCL Properties] dialog box appears. Select [General] tab in the [KONICA MINOLTA 950 PCL Properties] di- alog box and click [Print Test Page]. The test page is printed and the confirmation window appears.

  • Page 65: Installation Of The Printer Driver (Macintosh)

    Size of paper that is output for the solution of a line boundary mes- sage displayed by OS. Double-click the file copied on the desktop. – Click the [Continue] button and follow the on-screen instructions until the Easy Install dialog box appears. bizhub PRO 950...
  • Page 66 As prompted, enter the administrator name and password. For the administrator name and password, contact your network adminis- trator. In the Easy Install dialog box, click the [Install]. Click the [Close]. This completes the printer driver installation. bizhub PRO 950...

  • Page 67: Selecting And Connecting The Printer (Os 10.4/10.5)

    Kind (Connection) (Bonjour) from the [De- fault(Browser)] tab. In OS 10.5, after selecting [Select a driver to use] in [Print using] pro- vided in the lower section of the screen, select [KONICA MINOLTA 950 PS(P)] from the list and then click [Add]. –...
  • Page 68 Click the AppleTalk tab, and then select the “Make AppleTalk Active” check box. In OS 10.5, click [OK]. Click [Apply(Now)]. Click the close button at the upper left corner of the dialog box. – When the “This service has unsaved changes.” message appears, click the [Apply]. bizhub PRO 950...
  • Page 69 Select an intended printer name from among printers detected on the screen. In OS 10.5, after selecting [Select a driver to use] in [Print using] pro- vided in the lower section of the screen, select [KONICA MINOLTA 950 PS(P)] from the list and then click [Add]. –...
  • Page 70 In OS 10.5, clicking [Advanced] also allows you to set an IP address from the [TCP/IP] tab. Click [Apply(Now)]. Click the close button at the upper left corner of the dialog box. – When the “This service has unsaved changes.” message appears, click the [Apply]. bizhub PRO 950...
  • Page 71 Enter the IP address of the output device in [Address]. In OS 10.5, after selecting [Select a driver to use] in [Print using] pro- vided in the lower section of the screen, select [KONICA MINOLTA 950 PS(P)] from the list and then click [Add].
  • Page 72 In OS 10.5, clicking [Advanced] also allows you to set an IP address from the [TCP/IP] tab. Click [Apply]. Click the close button provided at the upper left of the window. – When the “This service has unsaved changes.” message appears, click the [Apply]. bizhub PRO 950...
  • Page 73 Enter the “ipp” in the [Queue]. In OS 10.5, after selecting [Select a driver to use] in [Print using] pro- vided in the lower section of the screen, select [KONICA MINOLTA 950 PS(P)] from the list and then click [Add].

  • Page 74: Selecting And Connecting The Printer (Os 10.3)

    Select [Rendezvous] as a connection method, and then select an in- tended printer name from among those detected. Select “KONICA MINOLTA” in “Printer Model”, select the desired mod- el from the list of models, and then click the [Add]. –...
  • Page 75 Select [AppleTalk] as a connection method, and then select an intend- ed printer name from among those detected. Select “KONICA MINOLTA” in “Printer Model”, select the desired mod- el from the list of models, and then click the [Add]. –...
  • Page 76 Click the [IP Printing]. Select “LPD/LPR” from “Printer Type”. In “Address”, enter the IP address of this machine. Select “KONICA MINOLTA” in “Printer Model”, select the desired mod- el from the list of models, and then click the [Add]. bizhub PRO 950...
  • Page 77 Macintosh computer is connected, and then specify the IP address and subnet mask. Click the close button at the upper left corner of the dialog box. – When the “Apply configuration changes?” message appears, click the [Apply]. bizhub PRO 950 5-13...
  • Page 78 Click the [IP Printing]. Select “Internet Printing Protocol” from “Printer Type”. In “Address”, enter the IP address of this machine. Select “KONICA MINOLTA” in “Printer Model”, select the desired mod- el from the list of models, and then click the [Add]. –...

  • Page 79: Test

    Installation of the printer driver (Macintosh) Test Page Print Macintosh Macintosh has no standard test print function. Double-click [ReadMe.txt] in the Driver CD. Then, select [Print...] from [File] menu and make sure it is print- ed properly. bizhub PRO 950 5-15...

  • Page 80: Uninstallation Of The Printer Driver

    If the printer driver was installed with an installer, the delete function of the printer driver is included. Click the [Start] button, and then select “All Programs” (or “Programs”), select “KONICA MINOLTA”, select “xxxx (product name)”, and then click “Uninstall Printer Driver”. Select the components to be deleted, and then click the [Uninstall].

  • Page 81: Uninstallation By An Installer (Pcl)

    In the setup selection dialog box, select “Uninstall Printer Driver”, and then click the [Next]. Select the components to be deleted, and then click the [Delete]. – Follow the on-screen instructions. If the restart screen appears, click the [OK] to restart the computer. bizhub PRO 950...

  • Page 82: Deletion Of Printer Driver By Manual Operation

    “Run as administrator”, then click “Server Prop- erties”. Click the Driver tab. Select the printer driver to be deleted from the “Installed printer drivers” list, and then click the [Remove]. – For Windows 2000/XP/Server 2003, continue with step 9. bizhub PRO 950...
  • Page 83 In case of 64bit OS, “C: \WINDOWS\system32\spool\drivers\x64” When you check folders and find a folder of the applicable model, delete it. However, if multiple drivers are installed including the Konica Minolta driver and PostScript Konica Minolta driver, the model information of all drivers is deleted.

  • Page 84: Macintosh

    Drag the [950] folder, which is located in [Library] - [Printers] - [KONI- CAMINOLTA] to the [Trash] icon. Drag the [KONICAMINOLTA_950_105.pkg] file, which is located in the [Library] - [Receipts] to the [Trash] icon. Restart the computer. This completes the printer driver uninstallation. bizhub PRO 950...

  • Page 85: For Mac Os X (V10.3/V10.4)

    Delete the unnecessary files from “Library” - “Printers”. – Drag the “950” folder, which is located in “Library” - “Printers” - “KONICA MINOLTA”, to the “Trash” icon. Drag the following file, which is located in “Library” - “Receipts”, to the Trash icon.

  • Page 86: Basic Printing And Various Function

    The [Print] dialog appears. Select printer in pull down menu besides the [Name]. Click [Preferences] to set detail if necessary. Click [OK] if a required setup is finished. The display returns to the [Print] dialog. bizhub PRO 950...
  • Page 87 The image controller receives and processes a print job sent from your computer. Note Refer to "PCL Printer Driver Setting (Windows)" on Page 8-1, "PostScript PPD Printer Driver setting (Windows)" on Page 9-1 for more information about print setup. bizhub PRO 950...
  • Page 88 Make sure that compliant printer name is selected in the [Printer]. – Refer to "PostScript PPD Printer Driver setting (Mac OS X)" on Page 10-1 for more information about print setup. Click [Print]. The image controller receives and processes a print job sent from your computer. bizhub PRO 950...

  • Page 89: Various Function

    Sets various sizes for the output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-15 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Page Attributes (Page Setup window)" on Page 10-4 bizhub PRO 950...
  • Page 90 Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-15 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Setup (Print window)" on Page 10-12 bizhub PRO 950...
  • Page 91 ABCD ABCD Document Reduction To set the margins: You can set the margins of output paper. Operating System Printer Driver Refer to Mac OS X PostScript PPD "Custom Paper Size (Page Setup window)" on Page 10-7 Margin bizhub PRO 950...

  • Page 92: To Set The Paper Tray

    Refer to Windows KONICA MINOLTA "Configure tab" on Page 8-11 PostScript PPD "Device Settings tab" on Page 9-13 Mac OS X PostScript PPD "The method to open the [Printer Info] win- dow (v10.4/v10.5)" on Page 10-1 Paper Sources bizhub PRO 950...
  • Page 93 Refer to Windows KONICA MINOLTA "Configure tab" on Page 8-11 PostScript PPD "Device Settings tab" on Page 9-13 Mac OS X PostScript PPD "The method to open the [Printer Info] win- dow (v10.4/v10.5)" on Page 10-1 Finisher bizhub PRO 950...
  • Page 94 "Finish tab" on Page 8-36 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)" on Page 10-20 Output tray Note The position of the output tray varies depending on the optional unit. bizhub PRO 950...

  • Page 95: To Print Multiple Copies

    Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-15 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Copies & Pages (Print window)" on Page 10-8 ABCD ABCD ABCD ABCD ABCD ABCD bizhub PRO 950 7-10...
  • Page 96 Operating System Printer Driver Refer to Windows KONICA MINOLTA "Finish tab" on Page 8-36 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)" on Page 10-20 Sub copier Master copier bizhub PRO 950 7-11...
  • Page 97 KONICA MINOLTA "Basic tab" on Page 8-15 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)" on Page 10-20 ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Offset Copies bizhub PRO 950 7-12...

  • Page 98: To Print Multiple

    "Layout tab" on Page 8-28 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)" on Page 10-20 Double Sides / Double Sides / Double Sides / Left Binding Top Binding Right Binding bizhub PRO 950 7-13...
  • Page 99 "Layout tab" on Page 9-17 Mac OS X PostScript PPD "Layout (Print window)" on Page 10-9 2 in 1 4 in 1 6 in 1 9 in 1 16 in 1 9 10 11 13 14 15 16 bizhub PRO 950 7-14...
  • Page 100 "Layout tab" on Page 8-28 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Image/Layout (Print window)" on Page 10- 2-in-1 2 Repeat 2 Repeat Reversal ABCD ABCD ABCD ABCD ABCD ABCD bizhub PRO 950 7-15...
  • Page 101 Prints a specific page so that it comes on the front, especially when printing on both sides of the paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Layout tab" on Page 8-28 1'st page of a chapter bizhub PRO 950 7-16...
  • Page 102 "Finishing (Print window)" on Page 10-20 Face down Face up Not To print blank page: Selects not to print out blank pages in the document. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Layout tab" on Page 8-28 bizhub PRO 950 7-17...

  • Page 103: To Set The Front / Back Cover, Insertion Sheet And Cover Sheet

    "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Setup (Print window)" on Page 10-12 ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Front Cover Front Cover - Blank - Printed bizhub PRO 950 7-18...

  • Page 104: To Set An Insertion Sheet

    "Cover Mode tab" on Page 8-42 ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Insertion Insertion sheet - Blank sheet - Printed bizhub PRO 950 7-19...
  • Page 105 To set a Tab Paper: Sets to print tab paper. You can set the text, tab position, and number of tabs. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Cover Mode tab" on Page 8-42 bizhub PRO 950 7-20...

  • Page 106: To Set For Finishing

    Staple output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Finish tab" on Page 8-36 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)" on Page 10-20 ABCD ABCDEF bizhub PRO 950 7-21...
  • Page 107 Operating System Printer Driver Refer to Windows KONICA MINOLTA "Finish tab" on Page 8-36 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)" on Page 10-20 ABCD ABCDEF bizhub PRO 950 7-22...
  • Page 108 Operating System Printer Driver Refer to Windows KONICA MINOLTA "Finish tab" on Page 8-36 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)" on Page 10-20 bizhub PRO 950 7-23...

  • Page 109: To Set A Watermark

    KONICA MINOLTA "Stamp/Composition tab" on Page 8-49 To print a Overlay: Sets a overlay and print it on the output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Stamp/Composition tab" on Page 8-49 ABCD bizhub PRO 950 7-24...
  • Page 110 "Stamp/Composition tab" on Page 8-49 ABCD COPY To print a Watermark: Sets a transparent character and print it on the output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Stamp/Composition tab" on Page 8-49 ABCD ABCD CONFID ENTIAL bizhub PRO 950 7-25...
  • Page 111 Printer Driver Refer to Windows KONICA MINOLTA "Stamp/Composition tab" on Page 8-49 To set numbering: Prints the copy number to the printed page. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Stamp/Composition tab" on Page 8-49 bizhub PRO 950 7-26...

  • Page 112: To Set An Image And Shade

    Refer to Windows KONICA MINOLTA "Quality tab" on Page 8-56 To set draft print: Prints lightly which is suitable for draft documents. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Quality tab" on Page 8-56 bizhub PRO 950 7-27...
  • Page 113 Refer to Windows KONICA MINOLTA "Quality tab" on Page 8-56 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Image/Layout (Print window)" on Page 10- Normal Toner Save Draft ABCD ABCD ABCD bizhub PRO 950 7-28...
  • Page 114 Prints the curved section of characters and images smoothly. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Quality tab" on Page 8-56 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Image/Layout (Print window)" on Page 10- Smoothing bizhub PRO 950 7-29...

  • Page 115: To Set Font-Related Items

    To set the format of the font that is to be downloaded (Download Font Format): Selects the font format to be downloaded to the printer (Outline or BMP). Operating System Printer Driver Refer to Windows KONICA MINOLTA "Quality tab" on Page 8-56 bizhub PRO 950 7-30...

  • Page 116: 7.2.10 Checking The Printer Driver Setting

    To check the version of the printer driver: Checks the printer driver version from the [Properties] window, when this printing system is used. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Other tab" on Page 8-61 bizhub PRO 950 7-31...

  • Page 117: 7.2.11 How To Store The Job And Reprint

    Protects a print job with a password when printing a confidential document. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-15 Mac OS X PostScript PPD "Security (Print window)" on Page 10-26 bizhub PRO 950 7-32...

  • Page 118: Pcl Printer Driver Setting (Windows)

    Select [Start]-[Printers and Faxes] to open the [Printers and 2003 Faxes] folder, right-click the printer icon and select [Printing Preference]. Windows Vista/Server Select [Start]-[Control Panel]-[Printers] to open the [Printers] 2008 folder, right-click the printer icon and select [Printing Prefer- ence]. bizhub PRO 950...

  • Page 119: Properties Window

    In this case, the settings are effective only when the application is in use. Note This chapter is described by using the printer window of Windows Vista. The properties window may differ from the window displayed by the printing command of applications. bizhub PRO 950...

  • Page 120: About Button

    Help When the [Help] is clicked, Help information appears. As well, when you click [Help] which appears when right-clicking a desired item, pop-up help for the item appears. bizhub PRO 950...

  • Page 121: Combination Of The Function

    When you select a function which causes a confliction with the settings al- ready configured, the message will be displayed This is a confirmation message to decide which setting will be turned off. When this message is displayed, click [OK]. bizhub PRO 950...

  • Page 122: General Tab

    Print Test Page Prints a test page of Windows. You can print a test page without using any application. Note For more information, refer to the manual of the Windows. bizhub PRO 950...

  • Page 123: Sharing Tab

    "About Properties window" on Page 8-1 about how to open the Property window. By using this [Sharing] tab, you can make the printer available to network us- ers. Note For more information, refer to the manual of the Windows. bizhub PRO 950...

  • Page 124: Ports Tab

    Using this button enables you to configure the selected port from above list. Enable printer pooling Enables printing to two or more identical print devices by using one logical printer. Note For more information, refer to the manual of the Windows. bizhub PRO 950...

  • Page 125: Advanced Tab

    Displays the installed printer driver name. New Driver Clicks to install a new or updated printer driver. Spool print documents so program finishes printing faster Sets to spool the documents before printing. Print directly to the printer Sets to print without spooling. bizhub PRO 950...
  • Page 126 Sets to print the spooled document irrespective of a priority settings. Keep printed documents Sets to hold the spooled data of the documents after printing. Enable advanced printing features Enables the advanced printing features. Note For more information, refer to the manual of the Windows. bizhub PRO 950...

  • Page 127: Security Tab

    Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 8-1 about how to open the Property window. For more information, refer to the manual of the Windows. bizhub PRO 950 8-10...

  • Page 128: Configure Tab

    None/PK-503/PK-504/PK-505(2/3 Hole)/PK-505(2/4 Hole) Cover Sheet Feeder None/PI-506 Punch Z-Fold Unit None/ZU-607(2 Hole)/ZU-607(2/3 Hole)/ZU-607(2/4 Hole) Trimmer None/TU-502 Stream Punch None/GP-501 User Authentication Disable/Device Account Track Disable/Enable Note Be sure to select the options from the “Device Option”. bizhub PRO 950 8-11...
  • Page 129 The [Acquire Device Information] function cannot be used unless you are connected and able to communicate with the copier. Acquire Settings Specifies the conditions of the connection destination to execute Acquire Device Information. Software Tools Starts up software tools such as PageScope Web Connection. bizhub PRO 950 8-12...

  • Page 130: Settings Tab

    - User Authentication/Account Track (page 8-26) To print using these functions, you should enter the password on the control panel of the copier after transmitting the print data. Refer to “User’s Guide (Security)” for more information. bizhub PRO 950 8-13...
  • Page 131 Displays the User Settings dialog box when a secure print is specified. Save Custom Size Saves the custom paper sizes. Acquire Device Information Communicate with the copier to read the Custom size that has been regis- tered and display it in the list. bizhub PRO 950 8-14...

  • Page 132: Basic Tab

    Sets the orientation to output paper in [Portrait] or [Landscape]. The default is [Portrait]. Paper - Original Size You can select a original size from the list shown by clicking [▼]. Document size that can be selected ISO-B4 ISO-B5 bizhub PRO 950 8-15...
  • Page 133 8 1/2 x 11 W 5 1/2 x 8 1/2 W A4 Tab 8 1/2 x 11 Tab Custom Size Note When [Custom Size] is selected, it is possible to set and register the orig- inal size. bizhub PRO 950 8-16...
  • Page 134 8 1/2 x 11 8 x 13 8 1/4 x 13 8 1/8 x 13 1/4 5 1/2 x 8 1/2 SRA4 A3 W A4 W A5 W B4 W B5 W ISO-B4 W ISO-B5 W bizhub PRO 950 8-17...
  • Page 135 Setting this function allows you to print an original on paper in full page. Zoom Print by specifying the enlargement or reduction ratio in the range from 25% to 400%. bizhub PRO 950 8-18...
  • Page 136 Paper Type (Paper Name) Make a selection to decide if complying with the Default Setting or using the name registered in the information of the Paper Name. Default Paper Type Sets various types of paper as the output paper. bizhub PRO 950 8-19...
  • Page 137 Make a selection of the unit to be used as a sign of the Paper Weight. Units that can be selected are as shown below. - g/m , Duodecimo, A-Book, B-Book, Octavo, Bond, Book, Bristol, Cover, Index, Tag bizhub PRO 950 8-20...
  • Page 138 Update Paper Name - Acquire Device Information Communicate with the copier to read the information of the Paper Name that has been registered and display it in the list. Output Method - Print Sets the normal printing. bizhub PRO 950 8-21...
  • Page 139 – Password: Enter the password. Click [OK]. Click [OK] to close the [Printing Pref- erences] window. Click [Print] to perform printing from the application. Select [RECALL] on the touch panel of the copier. bizhub PRO 950 8-22...
  • Page 140 Select the file to print and press [>>>]. Select [Auto] and press the [OK]. Confidential file is printed. Detail To confirm the settings for Confidential Output, select [Wait] or [Proof], and press [OK]. For more information, refer to “User’s Guide (Network Scanner)”. bizhub PRO 950 8-23...
  • Page 141 The print jobs will be saved in the built-in hard disc (HDD-A) of the cop- ier. Detail For details of the method for outputting the print jobs saved (Output from the HDD-A), refer to the User’s Guide (Network Scanner). bizhub PRO 950 8-24...
  • Page 142 10. If necessary, select the item and press the [ChangeSatting] to change settings. Press the [OK]. The Mode Check screen will be restored. Press [START] to resume the rest of the print job. bizhub PRO 950 8-25...
  • Page 143 - File Name: Enter a file name when a file is saved in the box. - User Box Number: Enter a box number of a box into which a job is saved. Authentication/Account Track Sets the User Authentication mode/Account Track. bizhub PRO 950 8-26...
  • Page 144 Offset Only when the finisher unit has been setup, select to shift the next position of each set of print out back and forth when printing multi set of copies. bizhub PRO 950 8-27...

  • Page 145: Layout Tab

    Layout tab Performs layout settings of the printer. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 8-1 about how to open the Printing Preference window. bizhub PRO 950 8-28...
  • Page 146 Selects the number of pages to be printed onto a sin- gle sheet. Layout Order Selects the printing order of pages. Border Selects whether draw a frame or line as the border be- tween pages. Overlap width line Selecting “N x N” sets “Overlap width line”. bizhub PRO 950 8-29...
  • Page 147 Blank pages might be printed out even if this is set, depending on the data in the document. The [Skip Blank Page] cannot be set in the following cases: - [Combination] is available in [Layout] tab. bizhub PRO 950 8-30...
  • Page 148 A specified page next paper. The [Chapter] cannot be set in the following cases: - The [1-Sided] is selected in the [Layout] tab - [Print Type]. - When the [Fold] check box is ON in [Finish] tab. bizhub PRO 950 8-31...
  • Page 149 - When an item other than [2-Sided] is selected in the [Layout] tab - [Print Type]. Binding Position Sets the binding position for the document to be printed. The position select- ed here will be the position of stapling, punching and base position of the im- age shift. bizhub PRO 950 8-32...
  • Page 150 Selects the shift mode. [Parallel Shift] shifts the image parallel. [Auto Reduction] shifts the image parallel and reduce an image to attain a hole print image printed. Image Shift Adjusts the details of the printing position to the output paper. bizhub PRO 950 8-33...
  • Page 151 [TAB Image Shift Settings] window. And set a shift amount in this window. This function is used to print the print content of the tab section edited in the original on the tab section of the Tab Paper. bizhub PRO 950 8-34...
  • Page 152 (When this function is turned on, the setting of [Image Shift] is applicable only to those other than the Tab Paper.) The movement of 10 -15 mm to Moving allows printing on the the right is available. Tab section. bizhub PRO 950 8-35...

  • Page 153: Finish Tab

    Configures the special functions of the image controller. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 8-1 about how to open the Printing Preference window. bizhub PRO 950 8-36...
  • Page 154 2 Staples /Top Binding (Portrait) (Portrait) ABCD ABCD The [Staple] cannot be set in the following cases: - When [Finisher] is not available in [Configure] tab. - When [Booklet] is selected in [Layout] tab - [Print Type]. bizhub PRO 950 8-37...
  • Page 155 The [Punch] cannot be set in the following cases: - When [Punch Unit], [Punch Z-Fold Unit] or [Stream Punch] is not available in [Configure] tab. - When [Booklet] is selected in [Setup] tab - [Print Type]. bizhub PRO 950 8-38...
  • Page 156 The [Divide Output] cannot be set in the following cases: - When [Staple] is not available in the [Finish] tab. Page per Section When the [Divide Output] is selected, you can set the number of pages for repeating the function. bizhub PRO 950 8-39...
  • Page 157 [Face Down] outputs paper with the printed side facing down. [Face Up] outputs paper with the printed side facing up. “(1 to N)” means to output paper starting with the first page. “(N to 1)” means to output paper starting with the last page. bizhub PRO 950 8-40...
  • Page 158 Refer to the “User’s Guide (POD Administrator’s Reference)” for more in- formation about Tandem Mode. Sub copier Master copier Tandem Mode cannot be set in the following cases: - When [Transparency Interleave] is selected. - When [Enhanced Security] is set to ON. bizhub PRO 950 8-41...

  • Page 159: Cover Mode Tab

    ABCD ABCD ABCD Front Cover - Off Front Cover Front Cover - Blank - Printed The [Front Cover] cannot be set in the following cases: - When the [Collate] is not available in the [Basic] tab. bizhub PRO 950 8-42...
  • Page 160 Tab Paper. Per Page Setting - List Each Per Page Setting can be saved as a list. Selects the list name from the list. Per Page Setting - Edit List Edits Per Page Setting. bizhub PRO 950 8-43...
  • Page 161 Changes the list name. When click this button, the [Edit List Name] dialog appears. Per Page Setting - Staple Settings Sets to use staple in the Per Page Settings. When click this button, the [Staple Settings] dialog appears. bizhub PRO 950 8-44...

  • Page 162: Bizhub Pro

    [Staple] of the [Finish] tab. Finish Stapling Specifies the last page to be stapled. Tab position Selects the tab position. Text on Tab Enters the text to be printed on the Tab paper. bizhub PRO 950 8-45...
  • Page 163 Set the font, font style and size of the tab text. Per Page Setting - Delete Deletes Per Page Setting. When select the Per Page Setting from the list and click this button, the se- lected setting is deleted. bizhub PRO 950 8-46...
  • Page 164 And also, the continuous insertion of up to 20 sheets is available for each of the Font cover/Back cover. The [Front Cover from Post Inserter] cannot be set in the following cases: - When the [Cover Sheet Feeder] is not selected in the [Configure] tab. bizhub PRO 950 8-47...
  • Page 165 Printed This is set when inserting the printed interleaf for the transparent sheet. Interleave Tray Uses to select the paper tray for Transparency Interleave. Note You can select when Transparency is set for Bypass Tray. bizhub PRO 950 8-48...

  • Page 166: Stamp/Composition Tab

    The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 8-1 about how to open the Printing Preference window. Watermark This check box is ON, Watermark function is available. You can select the type of Watermark. bizhub PRO 950 8-49...
  • Page 167 You can select only one font per watermark from the list shown by clicking the [▼]. Size Selects a point size for the font to be used in your watermark by clicking the [▼] or [▲] or by entering the size from the keyboard directly. bizhub PRO 950 8-50...
  • Page 168 Returns the position of the Current Watermark to the center of the paper. Angle Controls the “lean” angle of the watermark by clicking the [▼] or by typing a number in the text value box from -90 degrees to 90 degrees. bizhub PRO 950 8-51...
  • Page 169 For creating overlays, perform the following procedure. Create an overlay with the application in use. Select [Print] from the [File] menu. The selected menu may differ depending on the application used. Select [KONICA MINOLTA 950 PCL]. Click [Preferences]. Click [Stamp/Composition] tab. Select [Create Overlay File].
  • Page 170 When printing overlays, perform the following procedure. Select [Print] from the [File] menu. The selected menu may differ depending on the application used. Select [KONICA MINOLTA 950 PCL]. Click [Preferences]. Click [Stamp/Composition] tab. Click [Print in Overlay] and select file to be printed from list.
  • Page 171 Not Front-Back Cover: Page number is printed except front/back cover. Page Number - Starting Page Specifies the first page to print the page numbers. Page Number - Starting Page Number Specifies the initial page number to print. bizhub PRO 950 8-54...
  • Page 172 Distribution Number Stamping - Pages to Print Specifies the pages to print the copy number. You can choose either from [All Pages] or [1st Page Only]. Distribution Number Stamping - Starting Number Specifies the initial copy number to print. bizhub PRO 950 8-55...

  • Page 173: Quality Tab

    Performs settings related to Halftones, Brightness and Contrast. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 8-1 about how to open the Printing Preference window. bizhub PRO 950 8-56...
  • Page 174 - When check box is OFF, no smoothing operation is made. Toner Save Saves the consumption of toner by controlling printing density. Draft Print Prints lightly, which is suitable for draft documents. Quality Adjustment The print density can be adjusted by the sliding the control bar. bizhub PRO 950 8-57...
  • Page 175 Checking on the [Text and Graphics] allows you to print colored characters and lines, and graphics clearly in black. Print with Black - All Checking on the [All] allows you to print all objects including image data such as picture image excepting white areas clearly in black. bizhub PRO 950 8-58...
  • Page 176 However, since the quantity of data sent to the printer is smaller, it is possible to make a high speed printing. Use Printer Font - TrueType Font Substitution Table Displays the substitution settings of the True Type Font which is substituted with the built-in printer fonts. bizhub PRO 950 8-59...
  • Page 177 PCL Printer Driver Setting (Windows) Use Printer Font - Font Substitution Settings Selects the printer fonts which substitutes for the highlighted True Type Font. bizhub PRO 950 8-60...

  • Page 178: Other Tab

    When multiple Microsoft Excel sheets with different page settings are printed at one time, the sheets may be separated into single-sheet jobs depending on the data they contain. When this function is selected, job separation is minimized. bizhub PRO 950 8-61...
  • Page 179 Note “Remove White Background” and “Thin Line Support” function are only for the PCL driver. Thin Line Support Print the extra-fine lines of the document. Check Driver Version Displays the version of the current printer driver. bizhub PRO 950 8-62...

  • Page 180: Favorite Setting

    Turning on the [Icon] check box allows you to select an icon to be used from the list. – Selecting the [Sharing] check box allows you to share the settings that have been saved. Click [OK]. bizhub PRO 950 8-63...
  • Page 181 Click [Edit] of the Favorite Setting. Select a file set from the list that you want to export, click [Export], specify a location into which the file is saved, and then click [Save] (ex- tension: KFS). bizhub PRO 950 8-64...
  • Page 182 PCL Printer Driver Setting (Windows) To delete the setting file Setting file can be deleted by the following method: Click [Edit] of the Favorite Setting. Select the file to delete from the list, click [Delete]. Click [Yes]. bizhub PRO 950 8-65...

  • Page 183: About View Area

    Setting of the printer driver and status of the optional unit can be checked. To Check the Status of the Optional Unit Status of the optional unit can be checked by the image. Click [Printer View]. bizhub PRO 950 8-66...
  • Page 184 • Staple/Punch • Duplex Printer view • Copier main body /Option • Paper Sources • Output Tray Icon view • Cover/Front Cov- er Page/Back Cover Page/ Per Page Setting • Watermark • Secure Print • Image Shift bizhub PRO 950 8-67...
  • Page 185 PCL Printer Driver Setting (Windows) Detail Refer to the HELP for more information about Icon view. bizhub PRO 950 8-68...

  • Page 186: Postscript Ppd Printer Driver Setting (Windows)

    Select [Start]-[Printers and Faxes] to open the [Printers and 2003 Faxes] folder, right-click the printer icon and select [Printing Preference]. Windows Vista/Server Select [Start]-[Control Panel]-[Printers] to open the [Printers] 2008 folder, right-click the printer icon and select [Printing Prefer- ence]. bizhub PRO 950...

  • Page 187: Properties Window

    In this case, the settings are effective only when the application is in use. Note This chapter is described by using the printer window of Windows Vista. The properties window may differ from the window displayed by the printing command of applications. bizhub PRO 950...

  • Page 188: About Button

    Apply When the [Apply] is clicked, the present tab settings are saved. This button is useful when you want conduct other settings in other tabs, and the present tab settings are registered before using other tabs. bizhub PRO 950...

  • Page 189: Combination Of The Function

    When this message is displayed, select [Resolve all conflicts for me automatically] or [I will resolve the conflict myself]. When selecting [Resolve all conflicts for me automatically], the previous setting will be turned OFF. bizhub PRO 950...

  • Page 190: General Tab

    Displays the property window of the selected printer. You can change the setting of the printer driver with the property window. Print Test Page Prints a test page of Windows. You can print a test page without using any application. bizhub PRO 950...
  • Page 191 PostScript PPD Printer Driver setting (Windows) Note For more information, refer to the manual of the Windows. bizhub PRO 950...

  • Page 192: Sharing Tab

    "About Properties window" on Page 9-1 about how to open the Property window. By using this [Sharing] tab, you can make the printer available to network us- ers. Note For more information, refer to the manual of the Windows. bizhub PRO 950...

  • Page 193: Ports Tab

    Using this button enables you to configure the selected port from above list. Enable bidirectional support Gets the status information from the print device. Enable printer pooling Enables printing to two or more identical print devices by using one logical printer. bizhub PRO 950...
  • Page 194 PostScript PPD Printer Driver setting (Windows) Note For more information, refer to the manual of the Windows. bizhub PRO 950...

  • Page 195: Advanced Tab

    Configures the priority of the current setting. Driver Displays the installed printer driver name. New Driver Clicks to install a new or updated printer driver. Spool print documents so program finishes printing faster Sets to spool the documents before printing. bizhub PRO 950 9-10...
  • Page 196 Sets to print the spooled document irrespective of a priority settings. Keep printed documents Sets to hold the spooled data of the documents after printing. Enable advanced printing features Enables the advanced printing features. Note For more information, refer to the manual of the Windows. bizhub PRO 950 9-11...

  • Page 197: Security Tab

    The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 9-1 about how to open the Property window. Note For more information about Security tab, refer to the manual of the Win- dows. bizhub PRO 950 9-12...

  • Page 198: Device Settings Tab

    Selects the paper size to print for every Tray. Document size that can be selected Not Available 8 1/2 x 13 8 1/4 x 13 8 1/8 x 13 1/4 8 x 13 9 x 11 A3 Wide bizhub PRO 950 9-13...
  • Page 199 Available PostScript Memory Displays the available PostScript memory. For more information, refer to the Adobe PS User’s Guide. Output Protocol Selects the output protocol. For more information, refer to the Adobe PS Us- er’s Guide. bizhub PRO 950 9-14...
  • Page 200 Specifies a minimum font size to download as outline. For more information, refer to the Adobe PS User’s Guide. Maximum Font Size to Download as Bitmap Specifies a maximum font size to download as bitmap. For more information, refer to the Adobe PS User’s Guide. bizhub PRO 950 9-15...
  • Page 201 In this printing system, the following options are installable. Paper Source Unit None/LU-407/LU-408 Finisher None / FS-528/FS-611 Cover Sheet Feeder None/PI-506 Punch Z-Fold Unit None/PK-503/PK-504/PK-505(2/3 Hole)/ PK-505(2/4 Hole)/ZU-607(2-Hole)/ZU- 607(2/3 Hole)/ZU-607(2/4Hole) Trimmer Unit None/TU-502 Multi Hole Punch Unit None/GP-501 bizhub PRO 950 9-16...

  • Page 202: Layout Tab

    Sets the orientation to output paper in [Portrait], [Landscape] or [Rotated Landscape]. Page Order Selects the output order. [Front to Back] outputs paper starting with the first page. [Back to Front] outputs paper starting with the last page. bizhub PRO 950 9-17...
  • Page 203 ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Advanced Opens the [KONICA MINOLTA 950 PS(P) Advanced Options] window. For more information, refer to "Advanced Options windows" on Page 9-21. bizhub PRO 950 9-18...

  • Page 204: Paper/Quality Tab

    Wide, A4, A4 Tab, A4 Wide, A5, A5 Wide, A6, ISO-B4, ISO- Tray 4(LU-407/LU-408), B4W, ISO-B5, ISO-B5W, ISO-B6, Postcard, JIS-B4, JIS-B4W, Manual Feed JIS-B5, JIS-B5W, JIS-B6, Legal, Letter, Letter Tab, Letter Wide, PostScript Custom Page Size, SRA4, Statement, State- ment Wide, Tabloid, Tabloid Wide bizhub PRO 950 9-19...
  • Page 205 User This is set when printing the user specified paper set on the copier. Advanced Opens the [KONICA MINOLTA 950 PS(P) Advanced Options] window. For more information, refer to "Advanced Options windows" on Page 9-21. bizhub PRO 950 9-20...

  • Page 206: Advanced Options Windows

    Paper/Output - Paper Size You can select a paper size from the list shown by clicking [▼]. Document size that can be selected 8 1/2x13 8 1/4x13 8 1/8x13 1/4 8x13 9x11 A3 Wide A4 Tab A4 Wide bizhub PRO 950 9-21...
  • Page 207 Prints by specifying the enlargement or reduction ratio in the range from 1% to 1000%. Graphic - True Type Font Selects to substitute with printer fonts for the True Type Font or to download as Soft font. bizhub PRO 950 9-22...
  • Page 208 - When [Paper Source] is not available in the [Device Setting] tab. Paper Color Selects the colors of the output paper as shown below: - No Setting - White - Clear - Yellow - Pink - Blue bizhub PRO 950 9-23...
  • Page 209 Sets the binding position for the document to be printed. The position select- ed here will be the position of stapling, punching and base position of the im- age shift. Print Type Prints documents on both front and back sides. bizhub PRO 950 9-24...
  • Page 210 Example: 2 A4 size papers are aggregated on 1 A3 size paper. 2 in 1 ABCD ABCD ABCD ABCD 2 Repeat ABCD ABCD ABCD ABCD ABCD ABCD 2 Repeat Reversal (L) ABCD ABCD ABCD ABCD 2 Repeat Reversal (R) ABCD ABCD ABCD ABCD bizhub PRO 950 9-25...
  • Page 211 - When the [Finisher] is not available in the [Device Settings] tab - [Install- able Options] - When the [Default] or [Main Tray] is not selected in the [Output Tray]. - When any item other than [Z-fold] is selected in the [Fold]. bizhub PRO 950 9-26...
  • Page 212 - When the [Punch Z-Fold Unit] or [Multi Hole Punch Unit] (When the multi holes punch function is used) is not available in the [Device Settings] tab - [Installable Options] - When the other than [Z-fold] is selected in the [Fold]. bizhub PRO 950 9-27...
  • Page 213 The setting of [Fold] is available when the following unit is installed. Punch Z-Fold Unit Finisher (FS-611) Z-Fold Multi-Letter Fold (In/Out) Multi-Half Fold Image Shift Adjusts the details of the printing position to the output paper. bizhub PRO 950 9-28...
  • Page 214 Back Cover - Off Back Cover Back Cover - Blank - Printed The [Back Cover Page] cannot be set in the following cases: - When any item other than [Off] or [Z-Fold] is selected for the [Fold]. bizhub PRO 950 9-29...
  • Page 215 Uses to select the paper tray for Transparency Interleave. Paper Tray (Transparency Interleave) cannot be set in the following cases: - When the [Paper Sources] is not selected in the [Device Settings] tab - [Installable Options] bizhub PRO 950 9-30...
  • Page 216 On the copier's control panel, the Mode Check screen appears. In case of [Proof and Print], [MACHINE] tab blinks on the right above the copier touch panel screen. Press [MACHINE] tab. Mode Check screen appears on the control panel of copier. bizhub PRO 950 9-31...
  • Page 217 - [Type2] is suitable for printing the curved sections of normal characters. - [Type3] is suitable for printing the curved sections of ornamental writings and fine characters. - When [Off] is selected, no smoothing operation is made. bizhub PRO 950 9-32...
  • Page 218 A rule of thumb is used for the value of print density. Date/Time Specify the pages to print the date and time. All pages: Date/Time is printed in all the pages. 1st Page Only: Date/Time is printed in the 1st page only. bizhub PRO 950 9-33...
  • Page 219 Tandem printing should only be set up by your authorized service repre- sentative. Refer to the “User’s Guide (POD Administrator’s Reference)” for more in- formation about Tandem Mode. Sub copier Master copier Tandem Mode cannot be set in the following cases: - When [Transparency Interleave] is selected. bizhub PRO 950 9-34...

  • Page 220: Postscript Ppd Printer Driver Setting (Mac Os X)

    The method to open the [Printer Info] window (v10.4/v10.5) On the “Apple” menu, select “System Preferences”. Select [Print & Fax]. Select the printer and click [Options & Supplies]([Printer Setup]). Select [Driver]([Installable Options]). – [Printer Info] window appears. bizhub PRO 950 10-1...
  • Page 221 Selects an installed Finisher. Cover Sheet Feeder Selects an installed Cover Sheet Feeder. Punch Z-Fold Unit Selects an installed Punch Z-Fold Unit. Trimmer Selects an installed Trimmer Unit. Multi Hole Punch Unit Selects an installed Multi Hole Punch Unit. bizhub PRO 950 10-2...
  • Page 222 Select [Print] from File menu. – The [Print] window appears. Detail To perform printing, click [Print]. Selecting [Save As] on the [Presets] pop-up menu enables you to save the settings you configured in the [Print] window. bizhub PRO 950 10-3...

  • Page 223: Page Attributes (Page Setup Window)

    Format for Selects the printer you want to use. Paper Size You can select a paper size from the list shown. Document size that can be selected ISO-B4 ISO-B5 ISO-B6 SRA4 11 x 17 9 x 11 bizhub PRO 950 10-4...
  • Page 224 A specific paper size cannot be selected due to other functions set. For details, refer to the explanation of each of the functions. Orientation Sets the orientation to output paper. Scale Prints by specifying the enlargement or reduction ratio in the range from 25% to 400%. bizhub PRO 950 10-5...
  • Page 225 PostScript PPD Printer Driver setting (Mac OS X) The [Scale] cannot be set in the following cases: - When the [Pages per Sheet] is set to any item other than [1]. bizhub PRO 950 10-6...

  • Page 226: Custom Paper Size (Page Setup Window)

    You can register a new Custom Paper Size. In case of OS v10.4/v10.5, click [+] to create the custom page size. Paper Size Sets the height and width of the output paper. Printer Margins Sets the margins of the output paper. bizhub PRO 950 10-7...

  • Page 227: Copies & Pages (Print Window)

    Prints all pages of the document. - From [ ] To [ ]: Enters the initial page number and the ending page number. If you want to print one page, enter the page number to the both boxes. bizhub PRO 950 10-8...

  • Page 228: Layout (Print Window)

    PostScript PPD Printer Driver setting (Mac OS X) 10.5 Layout (Print window) Selects [Layout] on the pop-up menu in the [Print] window. Detail Refer to the "The method to open the [Print] window" on Page 10-3. bizhub PRO 950 10-9...
  • Page 229 ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Layout Direction Selects the layout direction the pages allocated onto a single paper. Border Selects whether draw a frame or line as the border between pages. bizhub PRO 950 10-10...

  • Page 230: Paper Feed (Print Window)

    Detail If you use [Auto Select], a paper feed tray is automatically selected. The paper specified in [Page Attributes] of this printing system is set on the tray. bizhub PRO 950 10-11...

  • Page 231: Setup (Print Window)

    Sets various types of paper sizes as the output paper as shown below. Types of paper that can be selected. No Setting Plain Paper Fine This is set when printing fine paper such as memo paper. bizhub PRO 950 10-12...
  • Page 232 Sets a front cover for which paper is different than the text paper. ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Front Cover - Off Front Cover Front Cover - Blank - Printed bizhub PRO 950 10-13...
  • Page 233 The [PI Front Cover Tray] or [PI Back Cover Tray] cannot be set in the follow- ing cases: - When the [None] is selected for [Cover Sheet Feeder] in the [Printer Info] window. Transparency Interleave Sets this when you want to use [Transparency Interleave] as paper. Select either [Blank] or [Printed]. bizhub PRO 950 10-14...
  • Page 234 Interleave Tray Sets this when you want to use the paper feed tray for [Transparency Inter- leave]. [Interleave Tray] cannot be set in the following cases: - [Transparency Interleave] is not set in the [Setup] window. bizhub PRO 950 10-15...

  • Page 235: Image/Layout (Print Window)

    PostScript PPD Printer Driver setting (Mac OS X) 10.8 Image/Layout (Print window) Selects [Image/Layout] on the pop-up menu in the [Print] window. Detail Refer to the "The method to open the [Print] window" on Page 10-3. bizhub PRO 950 10-16...
  • Page 236 - When any item other than [Off] is selected for [Front Cover], [Back Cover], [PI Front Cove Tray] or [PI Back Cover Tray] in the [Print] - [Setup]. Image Shift Adjusts the details of the printing position to the output paper. bizhub PRO 950 10-17...
  • Page 237 Displays the resolution of the printer (600 dpi). Print Density Selects the printing density. Item Print density Normal 100% 102% Toner Save Draft Print Note A rule of thumb is used for the value of print density. bizhub PRO 950 10-18...
  • Page 238 - [Type 2] is suitable for printing the curved sections of normal characters. - [Type 3] is suitable for printing the curved sections of ornamental writings and fine characters. - When [Off] is selected, no smoothing operation is made. bizhub PRO 950 10-19...

  • Page 239: Finishing (Print Window)

    ..collectively when printing multiple sets of pages. Offset Selects to shift the exit position of each set of print out back and forth when printing multi set of copies. bizhub PRO 950 10-20...
  • Page 240 Refer to the “User’s Guide (POD Administrator’s Reference)” for more in- formation about Tandem Mode. Sub copier Master copier Tandem Mode cannot be set in the following cases: - When [Transparency Interleave] is selected. - When [Enhanced Security] is set to ON. bizhub PRO 950 10-21...
  • Page 241 Sets the binding position for the document to be printed. The position select- ed here will be the position of stapling, punching and base position of the im- age shift. Duplex Prints continuous multiple pages on both front and back sides. bizhub PRO 950 10-22...
  • Page 242 ABCD The [Staple] cannot be set in the following cases: - When the [Finisher] is not available in the [Printer Info] - [Installable Op- tions]. - When any item other than [Z-Fold] is selected for [Fold]. bizhub PRO 950 10-23...
  • Page 243 [Printer Info] - [Install- able Options]. - When the [Post Card], [Wide paper (W)] or [Custom] is selected for [Page Setup] - [Paper Size]. - When any item other than [Z-Fold] is selected for [Fold]. bizhub PRO 950 10-24...
  • Page 244 - When any item other than [Off] is selected for the [Front Cover], [Back Cover], [PI Front Cover Tray] and [PI Back Cover Tray]. The setting of [Fold] is available when the following unit is installed. Punch Z-Fold Unit Finisher (FS-611) Z-Fold Multi-Letter Fold (In/Out) Multi-Half Fold bizhub PRO 950 10-25...

  • Page 245: Security (Print Window)

    10.10 Security (Print window) Selects [Security] on the pop-up menu in the [Print] window. Detail Refer to the "The method to open the [Print] window" on Page 10-3. Output Method - Off Sets the normal printing. bizhub PRO 950 10-26...
  • Page 246 Click [Print] to perform printing from the application. Press [RECALL] on the touch panel of copier. Press [Secure Folder]. Select a box and press the [OK]. The Password Input screen appears. Enter [Password]. Press [OK] to close the Password Input screen. bizhub PRO 950 10-27...
  • Page 247 [>>>]. Select [Auto] and press the [OK]. The Confidential file is printed. Detail To confirm the settings for Confidential Output, select [Wait] or [Proof], and press [OK]. For more information, refer to “User’s Guide (Network Scanner)”. bizhub PRO 950 10-28...
  • Page 248 The print jobs will be saved in the built-in hard disc (HDD-A) of the cop- ier. Detail For details of the method for outputting the print jobs saved (Output from the HDD-A), refer to the User’s Guide (Network Scanner). bizhub PRO 950 10-29...
  • Page 249 9. If necessary, select the item and press [ChangeSetting] to change set- tings. Press [OK]. The Mode Check screen will be restored. Press [START] to resume the rest of the print job. bizhub PRO 950 10-30...
  • Page 250 - User Authentication/Account Track (page 10-31) To print using these functions, you should enter the password on the control panel of the copier after transmitting the print data. Refer to “User’s Guide (Security)” for more information. bizhub PRO 950 10-31...

  • Page 251: Troubleshooting

    11.1 Basic Troubleshooting This section describes how to troubleshoot. If problems are not resolved by using the following procedure, contact your Konica Minolta service repre- sentative. First check the following ordinary causes of abnormalities: Check the power of the main body printer (copier), computers and ca- ble connections.

  • Page 252: General Problems Of Printing

    When the LCD is blank, go to Step 2. Press [POWER SAVER ON/OFF] on the control panel. – When the main body printer is used in the Power Save mode, press this switch to show the LCD in the Display mode. bizhub PRO 950 11-2...
  • Page 253 – Contact your Konica Minolta service representative if you cannot print the test page after performing the above procedures. The print setting of a job does not correspond to the result of printing.

  • Page 254: General Problems Of Postscript

    Set [Spool Print Jobs in HDD before RIP] to [Disable], switch off the copier’s main power, wait 10 seconds or more, switch it back on, and then try down- loading fonts again. For details on how to download fonts, refer to the User’s Guide that comes with the fonts. bizhub PRO 950 11-4...
  • Page 255 The direction in which non fixed size paper is loaded in the copier may be incorrect. Rotate the paper direction 90 degrees and then try printing after changing the settings of the driver and copier accordingly. bizhub PRO 950 11-5...

  • Page 256: Checking On Incomplete Jobs

    List screen. To get the Non complete Job List screen to appear: Press [JOB LIST] on the LCD panel. Press [Incomplete]. Check the Incomplete job. Detail For more information about job list, consult your system administrator. bizhub PRO 950 11-6...

  • Page 257: Font

    Font Font This chapter describes the font. 12.1 Font List (PCL) bizhub PRO 950 12-1...
  • Page 258 Font bizhub PRO 950 12-2...
  • Page 259 Font bizhub PRO 950 12-3...

  • Page 260: Font List (Postscript)

    Font 12.2 Font List (PostScript) bizhub PRO 950 12-4...
  • Page 261 Font bizhub PRO 950 12-5...
  • Page 262 Font bizhub PRO 950 12-6...
  • Page 263 Font bizhub PRO 950 12-7...

  • Page 264: Screen Fonts

    In case of Windows 2000/XP/ Server 2003, select [File] menu. Select [Install New Font]. [Add Fonts] dialog appears. Select a font to be added from the [\ScreenFont] folder of Driver CD or [\Screen Fonts\TrueType] fold- er of PS Driver CD. bizhub PRO 950 12-8...
  • Page 265 For a list of the types of fonts available, refer to "Font List (PostScript)" on Page 12-4. For details on the installation of screen fonts, refer to the ReadMe file in the Mac or Windows folder on the “PS Driver CD”. bizhub PRO 950 12-9...
  • Page 266 In case of Windows 2000/XP/Server 2003, select [Install New Font] from the [File] menu. In the [folders] pane at the lower left, navigate to the location “\Screen fonts\Type 1 Fonts” folder on the “PS Driver CD”. Click on [Select all]. Click on [OK]. bizhub PRO 950 12-10...

  • Page 267: Font Management Utility

    You can use “Font Management Utility” to add the PCL font and the Post- Script font to the image controller or delete them from it. For details, refer to the User's Guide contained in “PAGESCOPE UTILITIES CD-ROM” [Font Management Utility]. bizhub PRO 950 12-11...

  • Page 268: Utility Tool

    When the [Enhanced Security] is ON, the PageScope Web Connection function cannot be used. When the [Enhanced Security] is turned from ON to OFF, the PageScope Web Connection function is kept at [OFF]. To enable the PageScope Web Connection function, contact your ad- ministrator. bizhub PRO 950 13-1...

  • Page 269: 13.1.1 Outline Of The Pagescope Web Connection

    You can print the report as follows; - PS Font List - PS Demo Page - PCL Font List - PCL Demo Page - Configuration page Make a Direct Print Using the PageScope Web Connection allows you to make a Direct Print. bizhub PRO 950 13-2...

  • Page 270: 13.1.2 Start The Pagescope Web Connection

    Enter the IP address of the image controller in the [Address] and press the [Enter] / [Return] key. The top page of the PageScope Web Connection appears. Detail Contact your administrator about IP address of the image controller. bizhub PRO 950 13-3...
  • Page 271 Device Information - Configuration Summary Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Configuration Summary] from the sub navigation. The [Configuration Summary] page appears. bizhub PRO 950 13-4...
  • Page 272 Device Information - Option Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Option] from the sub navigation. The [Option] page appears. bizhub PRO 950 13-5...
  • Page 273 Device Information - Consumables Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Consumables] from the sub navigation. The [Consumables] page appears. bizhub PRO 950 13-6...
  • Page 274 Device Information - Meter Count Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Meter Count] from the sub navigation. The [Meter Count] page appears. bizhub PRO 950 13-7...
  • Page 275 Utility Tool Device Information - Online Assistance Click [Information] from the top navigation. The [Information] page appears. Click [Online Assistance] from the left navigation. The [Online Assistance] page appears. bizhub PRO 950 13-8...
  • Page 276 Utility Tool Device Information - Network Setting Information Click [Information] from the top navigation. The [Information] page appears. Click [Network Setting Information] from the left navigation. The [Network Setting Information] page appears. bizhub PRO 950 13-9...
  • Page 277 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [Default Setting] from the sub navigation. The [Default Setting] page appears. bizhub PRO 950 13-10...
  • Page 278 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [Font Information] from the sub navigation. The [Font Information] page appears. bizhub PRO 950 13-11...
  • Page 279 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [Macro List] from the sub navigation. The [Macro List] page appears. bizhub PRO 950 13-12...
  • Page 280 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [PCL Setting] from the sub navigation. The [PCL Setting] page appears. bizhub PRO 950 13-13...
  • Page 281 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [PS Setting] from the sub navigation. The [PS Setting] page appears. bizhub PRO 950 13-14...
  • Page 282 Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [TIFF Setting] from the sub navigation. The [TIFF Setting] page appears. bizhub PRO 950 13-15...
  • Page 283 Click [Current Jobs] from the left navigation. The [Current Jobs] page appears. After selecting [Print] or [Scanner Transmission] from the pull-down menu provided at the upper left of the list, click [Go] to change the con- tents of the list. bizhub PRO 950 13-16...
  • Page 284 Click [Job History] from the left navigation. The [Job History] page appears. After selecting [Print] or [Scanner Transmission] from the pull-down menu provided at the upper left of the list, click [Go] to change the con- tents of the list. bizhub PRO 950 13-17...

  • Page 285: 13.1.3 Print The Report

    Click [Print Information] from the left navigation. The [Print Information] page appears. Select the report type to be printed. Click [Print]. The report is printed. Note About the report type, refer to “Report to be printed” on page 13-2. bizhub PRO 950 13-18...

  • Page 286: 13.1.4 Make A Direct Print

    Click [Direct Print] from the top navigation. The [Direct Print] page appears. Click [Browse], select file to be printed and click [OK]. The [Direct Print] page will be restored. Click [Print]. The direct print of a specified file is made. bizhub PRO 950 13-19...

  • Page 287: Netware

    The main body printer will print out a Status Page indicating the file servers equipped with print server and the queues that the file servers will service. bizhub PRO 950 13-20...
  • Page 288 The Directory Information Base (DIB) is used to store information about serv- ers and services, users, printing systems, gateways, etc. It is a distributed database, allowing access to data anywhere on the network wherever it is stored. bizhub PRO 950 13-21...
  • Page 289 NetWare allows the use of PCONSOLE as an alternative of NWADMIN. PCONSOLE is used to set up static information of print servers regarding which queues to service and to whom information is given in case of trouble. bizhub PRO 950 13-22...
  • Page 290 If you are sure that the bindery context exists in the file server, you can set up the print server with PCONSOLE. Detail Refer to the Novell NetWare manual for details of setup with PCONSOLE. In Bindery mode, only upper-case letters are valid for the printer server password. bizhub PRO 950 13-23...

  • Page 291: Unix Printing Through Tcp/Ip

    PRO 950 13-24...
  • Page 292 - Use arp and ping capability. - Use BOOTP (Internet Boot Protocol). - Use reverse ARP (rarp) capability (Ethernet II frame type only). - Use arp command, MAP (Management Access Program), or BOOTP Lite for Windows. bizhub PRO 950 13-25...
  • Page 293 To set up a remote printer on the host that sends jobs to the network inter- face card using printer resident lpd, add an entry to the /etc/printcap file on your host for each printer you use. Perform the following procedure: bizhub PRO 950 13-26...
  • Page 294 When a window appears, change the values shown to configure the network interface card. – The values displayed are default values. You must replace the short and long form filter values with the values shown in the following ta- ble. bizhub PRO 950 13-27...
  • Page 295 Use the host address of the Network Interface Card for the Remote System. Use [PRINT] for the queue on the remote system. Add a description (optional). Press [Enter] to generate. – Installation is complete. Test your printer by executing the following command: – lp -d<queue_name> <file_name> bizhub PRO 950 13-28...
  • Page 296 Data Requested Example Description of Input Data Printer Name myprinter name to be used in lp com- mand Remote System Name fastprint Network Interface Card host- name as in /etc/hosts Remote printer Name PRINT lpd queue name bizhub PRO 950 13-29...
  • Page 297 Destination type must be [OTHER]. When prompted for transforming SCS to ASCII, type YES to allow the AS/400 do the character translation. Manufacturer type and model must be the print driver that goes with your image controller. bizhub PRO 950 13-30...
  • Page 298 Y – Enter another printer name or quit setup: Q If necessary, stop and restart your remote daemon. Using a line editor of your choice, edit the /etc/printcap file and change the: rp=entry to PRINT. bizhub PRO 950 13-31...
  • Page 299 Setting Up System V Release 4 and Solaris 2.X to Use lpd If your system recognizes the LPSYSTEM command, you do not need to in- stall the dedicated utility, Konica Minolta's host-side software. Another op- tion is the admintool if your system supports it.

  • Page 300: Tonecurve Utility

    (Saved in the image controller.) Settings completed A setting is made with the tone curve of the [Screen tab] of the PPD Plug-in driver for printing. Note Files in excess of 10 pages cannot be added to the Test Chart. bizhub PRO 950 13-33...
  • Page 301 - Clicking [Print Settings] with the tone curve adjusted displays the Print Settings window. In the Print Settings window, the screen settings and the print settings are made. - Clicking [Print] allows you to make a print for verification. bizhub PRO 950 13-34...
  • Page 302 - Since putting a check on [Use CIE Color] causes a color conversion proc- ess to be conducted through the XYZ color space, the level of gradient can be raised, in which case, however, a longer time may be required for output. bizhub PRO 950 13-35...

  • Page 303: Appendix

    PostScript jobs including the EPS EPS data are output through the data can be output. However, the USB port, error pages may be out- job will continue until the USB trans- put. mission is time-out. (Only jobs for PostScript) bizhub PRO 950 14-1...
  • Page 304 Postscript font. When the Letter Tab size is output An output is made in the Letter Tab as a PDF direct print, a sheet of size. 9x11 inch size paper is required by the copier. bizhub PRO 950 14-2...
  • Page 305 After switching over, the main pow- made with ICMPv6 not eliminated er is required to be turned OFF and from IPSec. (Normally, the opera- tion is made with ICMPv6 eliminat- ed from IPSec.) bizhub PRO 950 14-3...

  • Page 306: Procedure For Installation With Linux

    “Example Using OpenOffice or using Star Suite” on page 14-7. From the Main Menu, select System Tools, then Terminal. Get the PPD file that has been copied read into the CUPS. And then restart the CUPS. bizhub PRO 950 14-4...
  • Page 307 The CUPS Administration Web page appears. Click [Add Printer]. A pop-up window appears. Enter the user name and pass- word for using root privileges, and then click [OK]. Enter the printer name, location, and description if necessary, and then click [Continue]. bizhub PRO 950 14-5...
  • Page 308 Using printer Hostname - socket://Hostname:9100 Hostname may be substituted by IP Address, and Port is optional. – In case of USB Printing Select USB Printer #1 (KONICA MINOLTA 950PS(P)). If it is not displayed, restart the machine. – In case of Parallel Printing Select Parallel Port #1.
  • Page 309 Appendix Example Using OpenOffice or using Star Suite 0 Paper sizes supported by the bizhub PRO 950 may not be displayed when the OpenOffice is being used. In such a case, follow the procedure given below. However, the procedure described here is applicable when the OpenOffice 1.0.2 is used on the RedHat9 and the procedure and op-...
  • Page 310 Appendix Click [OK]. Select “KONICA MINOLTA 950 OpenOffice PPD” (KO950opn.ppd), and then click [Next]. In the command line, enter “lpr -P” followed by the name of the printer added first, then click Next. Change the printer name. Click [Finish]. The Printer Administration dialog box appears again.
  • Page 311 A list of the currently active print jobs appear. Detail To check the status of completed print jobs, click [Show Complete Jobs]. Refer to “Advanced Options windows” on page 9-21 for more informa- tion about “Finishing Options”. bizhub PRO 950 14-9...

  • Page 312: Glossary

    Setting which has been selected in advance when the power button is turned ON. Or, setting which has been selected in advance when some function is turned ON. Density Quantity to express the depth of image. bizhub PRO 950 14-10...
  • Page 313 Not only connecting, it converts the for- mat, address, protocol, etc. of the data according to the network to be connected. Gradation Light and shade levels of image. Larger numbers can reproduce changes of density more smoothly. bizhub PRO 950 14-11...
  • Page 314 Abbreviation of Line Printer Request/Line Printer Daemon. A type of printing through a network of the Windows- NT system or UNIX system. Printing data from Win- dows or UNIX can be transmitted to a printer on a network using TCP/IP. bizhub PRO 950 14-12...
  • Page 315 Peer to peer A form of network where devices connected can transmit data to each other without using a server for specific use. Pixel Minimum unit constituting images. bizhub PRO 950 14-13...
  • Page 316 Logical printer name required for LPD/LPR printing. Queue Name Name given to each device to permit printing in the network printing. Rendezvous A technique to detect devices supporting Rendez- vous on the IP network mutually. Apple employed it newly from MacOS 10.2. bizhub PRO 950 14-14...
  • Page 317 TrueType A type of outline font. Developed by Apple and Mi- crosoft and employed for Macintosh and Windows as the standard outline font. Can be used for both displays and prints. bizhub PRO 950 14-15...
  • Page 318 Uninstall To delete installed software. Abbreviation of Universal Serial Bus. General-use interface standard for connecting a computer and a mouse, printer, etc. Web browser Software to access web pages. Internet Explorer, Netscape Navigator, etc. are examples. bizhub PRO 950 14-16...

  • Page 319: Index

    10-30 Watermark ........8-49 Offset ..........9-23 Original Size ........8-15 Output Tray ........10-22 Zoom ..........8-18 Overview .......... 2-1 Page Number ......... 8-54 Pages Per Sheet ......9-18 Paper Color ....8-20 9-23 10-13 bizhub PRO 950 14-17...
  • Page 320 http://konicaminolta.com Copyright 2009. 8 A0Y59551-PK-11 2009...

Table of Contents