Hayward VL Series Sand Filter Systems Owner's Manual
  1. Manuals
  2. Brands
  3. Hayward Manuals
  4. Water Filtration Systems
  5. VL Series Sand Filter Systems
  6. Owner's manual

Hayward VL Series Sand Filter Systems Owner's Manual

Sand filter installation, operation & parts
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Basic safety precautions should always be followed, including the following: Failure to follow instructions can cause
severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for one of the
following signal words and be alert to the potential for personal injury.
WARNING
warns about hazards that could cause serious personal injury, death or major property damage
and if ignored presents a potential hazard.
CAUTION
warns about hazards that will or can cause minor or moderate personal injury and/or property
damage and if ignored presents a potential hazard. It can also make consumers aware of actions that are unpredictable
and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.
Use only High Rate Sand No. 20 Silica Sand (.45mm - .55mm)
OWNER'S MANUAL
INSTALLATION, OPERATION & PARTS
SAND FILTER
Model VL40T32
SAVE THIS INSTRUCTION MANUAL
Hayward Pool Products
One Hayward Industrial Drive, Clemmons, NC 27012
www.haywardnet.com
ISVL40 Rev. D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VL Series Sand Filter Systems and is the answer not in the manual?

Questions and answers

Related Manuals for Hayward VL Series Sand Filter Systems

Summary of Contents for Hayward VL Series Sand Filter Systems

  • Page 1 The NOTICE label indicates special instructions that are important but not related to hazards. SAVE THIS INSTRUCTION MANUAL Use only High Rate Sand No. 20 Silica Sand (.45mm - .55mm) Hayward Pool Products One Hayward Industrial Drive, Clemmons, NC 27012 www.haywardnet.com...
  • Page 2 Do not change filter control valve position while system pump is running. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS TOP MOUNT VALVE SAND FILTERS...

  • Page 3: How It Works

    – To avoid dangerous or fatal electrical shock, turn OFF power to motor before working on electrical connections. Your Hayward VL Series sand filter is a totally corrosion- proof filter that blends superior flow characteristics and 3. Loading sand media. Filter sand media is loaded features with ease of operation.

  • Page 4: Service And Repairs

    Hayward Pool Products, Inc. 6. Note the initial pressure gauge reading when the filter is clean. (It will vary from pool to pool depending upon the pump and general piping system).

  • Page 5: Specifications

    Strainer Housing, drain plug o-ring and plug, and pump interlocking Pump Shaft Seal and pump Body VLX4008 O-Ring (Not shown) Pump without Strainer VLX4009 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS TOP MOUNT VALVE SAND FILTERS Page 5 of 8 ISVL40 Rev D...

  • Page 6: Product Registration

    200 to 400 ppm CALCIUM HARDNESS 0.2 ppm Maximum COMBINED CHLORINE CHLORINE (STABILIZED) 1.0 to 3.0 ppm CHLORINE STABILIZER 60 to 80 ppm (Cyanuric Acid) USE ONLY HAYWARD GENUINE REPLACEMENT PARTS TOP MOUNT VALVE SAND FILTERS Page 6 of 8 ISVL40 Rev D...
  • Page 7 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS TOP MOUNT VALVE SAND FILTERS Page 7 of 8 ISVL40 Rev D...
  • Page 8 LIMITED WARRANTY ® To original purchasers of this equipment, Hayward Pool Products, warrants its products to be free from defects in materials and workmanship for a period of ONE (1) year from the date of purchase. Hoses, seals, gauges, baskets and o-rings are warranted for defects in materials and workmanship for a period of thirty days.

This manual is also suitable for:

Vl40t32

Table of Contents