The Front Of The Router - NETGEAR WGR614v7 - 54 Mbps Wireless Router Setup Manual

Router Setup Manual

The Front of the Router

1
Figure 1-1
You can use the status lights on the front of the router to verify various conditions.
Table 1-1.
Status Light
Activity
On
1. Power
Off
On
2. Test
Off
On
3. Wireless
On -- Amber
4. Internet
On -- Green
Blink -- Green
On (Green)
Blink (Green)
5. LAN (Local Area
On (Amber)
Network) Lights
Blink (Amber)
1-4
Off
1-2
2 4
3
Description
Power is supplied to the router.
Power is not supplied to the router.
The system is initializing or in the middle of a firmware upgrade.
The system is ready and running.
Indicates that the Wireless port is initialized.
The Ethernet cable is connected but the router has not gotten an
Internet address.
The router has an Internet address.
Data is being communicated with the Internet.
The local port is connected to a 100 Mbps device.
Data is being transmitted at 100 Mbps.
The local port has detected a link with a 10 Mbps device.
Data is being transmitted at 10 Mbps.
No link is detected on this port.
v1.0, 2006-03-17
5
Connecting the Router to the Internet