Active Data Connections; Synchronisation - Nokia 5800 - XpressMusic Smartphone - WCDMA User Manual

Proxy port number
●
proxy server.
WLAN internet access points
Select Menu Settings
>
Destinations Access
>
instructions.
To edit a wireless LAN (WLAN) access point, open one of
the access point groups, and select an access point
marked with . Follow the instructions from your WLAN
service provider. Select from the following:
WLAN network name
●
Search for networks. If you select an existing
network, WLAN network mode and WLAN security
mode are determined by the settings of its access point
device.
Network status — Define whether the network name
●
is displayed.
WLAN network mode
●
ad hoc network and to allow devices to send and
receive data directly; a WLAN access point device is not
needed. In an ad hoc network, all devices must use the
same WLAN network name.
WLAN security mode
●
WEP, 802.1x, orWPA/WPA2
are not available for ad hoc networks). If you select
Open network, no encryption is used. The WEP, 802.1x
and WPA functions can be used only if the network
supports them.
© 2009 Nokia. All rights reserved.
— Enter the port number of the
and Connectivity
>
point, and follow the
— Select Enter manually
— Select Ad-hoc to create an
— Select the encryption used:
(802.1x and WPA/WPA2
Homepage — Enter the web address of the starting
●
page.
Use access point
●
connection using this access point automatically or
after confirmation.
The available options may vary.

Active data connections

Select Menu Settings
>
Connection mgr..
In the active data connections view, you can see open data
or
connections:
data calls
packet data connections
wireless LAN (WLAN) connections
To end a connection, select
To end all open connections, select
Disconnect all.
To view the details of a connection, select
Details.

Synchronisation

Select Menu Settings
>
transfer > Sync.
The Synchronisation application enables you to
synchronise your notes, calendar entries, text and
Connectivity
— Set the device to create a
and Connectivity
>
Options > Disconnect.
Options
>
Options
and Connectivity
>
>
Data
73