Table of Contents
Advertisement
Item
Message
HDD CAPACITY
FULL!
TOO MANY
PARTITIONS!
HDD
DISCONNECTED!
CANNOT FORMAT!
TOO MANY
TARGETS!
UNKNOWN DEVICE
CONNECTED!
CANNOT ACCESS
TARGET!
CANNOT
HDD
RECOGNIZE HDD!
CANNOT ACCESS
CARD!
MISMATCH
COMPONENT!
P2 CARD IS
UNFORMATTED!
CARD IS EMPTY!
CANNOT COPY!
VERIFICATION
FAILED!
PLEASE FORMAT P2
CARD!
CANNOT CHANGE!
On-screen
keyboard
CANNOT SET!
INVALID VALUE!
NO FILE!
READ ONLY
PLAYLIST VERSION!
Play list
CANNOT FIND CLIP! Specified clip could not be found.
INCLUDE MULTI
FORMAT!
READ ONLY 100
EVENTS!
Description
Not enough space left on the hard disk.
There are too many partitions.
The unit is not connected to a hard disk.
The hard disk cannot be initialized.
Multiple devices are connected.
The connected DVD drive is not compatible.
An error occurred during hard disk access.
The destination target cannot be properly
recognized.
An error occurred during P2 card access.
Copying cannot be made because the
destination card is in the wrong format.
The P2 card is not formatted.
The P2 selected for copying is empty.
The compare check after copying failed.
This warning indicates that data could not be
imported from a hard disk to a P2 card because
the P2 card contained recorded data.
An attempt was made to change PERSON when
no text memo had been entered.
The entered value is invalid.
The specified file does not exist.
The play list file is opened as read only because
it is in a different version.
The files are not in the same format.
The play list file exceeds the upper limit on
events.
Measure
There is not enough space on the connected hard
disk. Use a new hard disk or formatted hard disk.
Hard disks can handle up to 23 partitions. Use a new
hard disk or formatted hard disk.
Reconnect the USB cable. If the hard disk does not
operate normally, turn it off and turn it back on again.
Connect another hard disk drive.
Disconnect devices, turn off the unit and turn it back
on again.
Disconnect devices, turn off the unit and turn it back
on again.
Check hard disk status and connection.
Reboot the hard disk or connect a different hard
disk.
Check P2 card.
Use a P2 card with appropriate capacity.
Use a formatted P2 card.
Copying is not performed since the card is empty.
Copy the data again.
You cannot copy to a P2 card that contains data.
Format the card on a P2 device and copy again.
First enter a text memo.
Enter a valid value.
Use SAVE AS to save or insert a normally operating
card.
Play lists created on the AJ-SPD850 can only be
opened as read only files. To edit such files on this
unit save them out.
Insert the card with the clip.
Play list files in different formats cannot be loaded.
The upper limit on events is 100 events. Files are
opened as read only.
For Long and Trouble-Free Operation: Error Messages
157
Advertisement
Table of Contents
