The enhanced AEC Exchange tool simplifies the exchange of data for use in building design� With support for the new Autodesk Package files (�adsk) and the Shrinkwrap tool, AEC Exchange allows users to publish data files with simplified 3D representations and intelligent...
Technical What’s New Plastic Part Design Silhouette Curve A new 3D sketch command Autodesk Inventor software offers plastic parts called Silhouette Curve is designers maximum flexibility by combining native introduced� A silhouette Inventor geometry with exterior surface models curve is a 3D curve that...
Inventor 3D in Autodesk Inventor 2010 software to develop initial models of plastic parts to simplify concept sketches and kinematic models� Then take...
Create parametric studies, using the Parametric table, to identify design constraints and parameter ranges� Then use the parameter table controls to visualize the effects of parameter changes on your design� Autodesk Inventor 2010...
Technical What’s New Interoperability Solver Performance Autodesk Inventor 2010 software uses new solver Autodesk Inventor 2010 software simplifies technology to provide improved performance for interdisciplinary collaboration in the building sector complex assembly analysis and the exploration of with simplified exchange of 3D mechanical systems data multiple design variations in parametric studies�...
Two new commands are introduced to simplify a spline Autodesk Inventor where they can then be used directly handle reset: Reset All Handles and Reset Handle. in modeling operations� The CATIA translator also exports models with support for CATIA V5 versions R10 The word Bowtie is gone, and all options are available in through R18�...
Define folders, based on your chosen convention, to group browser nodes� Enhanced Assembly Restructure Using Autodesk Inventor software, you can place or create a component in an assembly without worrying where it will reside in the final assembly structure� You...
Once the folded model has unfolded features it is likely that features will be added that are most easily defined in the flat� Following adding these features, a Refold feature returns the model to the original folded state� Autodesk Inventor 2010...
Once a sketched line is declared to be a Cosmetic Centerline, it will display bend extent lines in the flat pattern� Cosmetic Centerlines can also be recovered in flat pattern drawing view bend notes and bend tables� Autodesk Inventor 2010...
If you find that you recreate the same symbol folders repeatedly for different drawings, consider using a drawing template with the folders predefined� User-defined symbol folders are represented by distinctive icons and they exhibit the same open and close behavior as other Inventor browser folders� Autodesk Inventor 2010...
Assembly Level Storage of Custom Columns Dynamic Licensing Custom columns are now stored in the assembly file, Customers with a mix of Autodesk Inventor seats making it much easier to share custom BOM data� (Inventor Suite, Simulation, Routed Systems, or...
A new session uses the filter defaults� Autodesk and AutoCAD are registered trademarks of Autodesk, Inc�, in the USA and/or other countries� All other brand names, product names, or trademarks belong to their respective holders� Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document�...
Need help?
Do you have a question about the INVENTOR 2010 and is the answer not in the manual?
Questions and answers