Lcd Cable/Wireless Lan Antenna / Bluetooth Antenna - Toshiba A100 VA3 - Satellite - Pentium Dual Core 1.6 GHz Maintenance Manual

4 Replacement Procedures 4.23 LCD cable/Wireless LAN antenna / Bluetooth antenna

4.23 LCD cable/Wireless LAN antenna / Bluetooth antenna

4.23.1 LCD cable
Removing the LCD cable
To remove the LCD cable, perform the following procedure. (See Figure 4-38.)
1. Remove the right side hinge cover (viewing from the front).
2. Peel off the acetate tape fixing the LCD cable and two acetate tapes fixing the
insulator.
3. Take the LCD cable out of the hinge hole.
LCD cable
Acetate tape
Installing a LCD cable
To install a LCD cable, perform the following procedure. (See Figure 4-38.)
1. Pass the LCD cable through the hinge hole, put the cable (to the connector on the
system board) in the slot guiding the cable at the back.
4-48
Figure 4-38 Removing the LCD cable
PORTEGE A100 Maintenance Manual (960-460)
Hinge cover
Acetate tapes